Tender For Repair/ Maintenance Of Security And Street Lights In Domestic And Technical Area Of Af Stn Sonegaon.
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
3 days left
EMD
19800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Security And Street Lights In Domestic And Technical Area Of Af Stn Sonegaon.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Laying, jointing and testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of following cross sectional area with all fixing & connecting accessories like cable glands and alluminium thimbles including taking down old unserviceable cable all as specified and directed. |
| 2 | 10 sqmm 4 core. |
| 3 | 16 sqmm 4 core. |
| 4 | 25 sqmm 3.5 core. |
| 5 | 35 sqmm 3.5 core. |
| 6 | Supply and fixing/laying in replacement 40 mm bore, steel tubings galvanised, light grade with all fittings fixing along the electric pole / wall for protection of cable complete all as specified and as directed. |
| 7 | S & F Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe for laying of electric cable of size 50mm outer diameter and 38 mm inner diameter or suitable for upto 70 sqmm 3.5 core XLPE cable with IS 14930 (part 2) 2001 and 6 mm thickness laid in trenches,wall, floor , pole including bends, sockets and other connected accessories complete all as specified and directed. |
| 8 | Dismantling and taking out the unserviceable street light fitting any capacity and replacing the following defective accessories with new and making the street light in serviceable condition and refixing back in position connecting and testing complete all as specified and as directed.Note: - Accessories such as electronic driver and surge protection device will be measured and paid for separately under relevent items. |
| 9 | S & F in replacement electronic driver (Printed circuit board) suitable for following LED street/flood light fitting input voltage 230 Volt 50 HZ AC supply complete all as specified anddirected.Note : The make of electronic driver should match with the make of LED light fitting installed at site and the contractor should visit the site before quoting the rates so as to avoid any ambiquity during execution stage. |
| 10 | 250 watt LED light fitting |
| 11 | 150 watt LED light fitting |
| 12 | 120/100 watt LED light fitting |
| 13 | 45 watt LED light fitting |
| 14 | S & F in replacement surge protection devices surge voltage 5 KV suitable upto 45 watt LED street/flood light fitting input voltage 230 Volt 50 HZ AC supply complete all as specified and directed.Note: - The make of surge protection device should be match with the make of LED light fitting installed at site and the contractor should visit the site before quoting the rates so as to avoid any ambiquity during execution stage. |
| 15 | All as per item no 6 .00 above but upto 150 watt LED light fitting |
| 16 | S & F in replacement LED Street light 60 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK08 complete all as specified and directed |
| 17 | S & F in replacement LED Street light 70 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete all as specified and directed. |
| 18 | S & F in replacement LED Street light 120 Watt made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 complete all as specified and directed. |
| 19 | S & F in replacement on existing pole LED landscape lights 35 watt opal diffuser new generation post top energy saving environmental friendly long life asthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source suitable for mounting on 76mm dia pole complete all as specified and directed |
| 20 | S & F in replacement on existing pole LED landscape lights 35 watt clear diffuser new generation post top energy saving environmental friendly long life asthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source suitable for mounting on 76mm dia pole complete all as specified and directed |
| 21 | S & F in replacement LED Flood light 150 Watt environmental friendly long life exclusive innovative die cast aluminium IP66 flood light, suitable for highlighting architiectural facade and general purpose lighting complete all as specified and directed. |
| 22 | S & F in replacement LED bamboo bollard light 8 watt new generation enery saving environmental friendly long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source complete all as specified and directed |
| 23 | S & F in replacement junction box of size 200mm x 150mm x 100mm mada out of FRP with double stud hinged door locking including fixing hardware on Steel tubular pole or PCC pole in and including MCB 1 amps - 1 Nos with dinrail for mounting of MCB including suitable connector for looping duly sealed with rubber plugs complete all as specified and directed. |
| 24 | S & F MCB, Triple pole & neutral, 63 amps, 415 volts, ‘C’ curve, 10 KA complete all as specified and as directed |
| 25 | S & F MCB, Single pole & neutral, 6 to 32 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed |
| 26 | S & F MCB, Single pole, 1 to 5 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and as directed |
| 27 | S & F in replacement GI pipe bracket made out of medium grade 40 mm bore GI tubing duly bend to the required shape length of the bracket shall be not less than 1.5 m including MS flat iron clamps, nuts, boilts and washers for fixing of bracket on pole complete all as specified and directed. |
| 28 | M & L for painting to existing surfaces of street light steel tubular or hexagonal poles of any height with 2 coats of aluminium paint over the existing surface including brackets clamps metal junction boxes etc including writing of pole number complete all as specified and as directed. |
| 29 | M & L for applying Radium paint/strip on any type of poles including 25mm overlapping applying feviquick on joints duly different colour of size 5 cm x 3 Nos between every interval of 5 cm complete all as specified and directed |
| 30 | M & L for sub main wiring with 2 run of 1.5 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FR) of working voltage 1100 volts grade with stranded copper conductor including one run of 1.5 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FR) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly drawn with and including 20 mm dia PVC rigid non- metallic conduit including flexible PVC pipe at starting and finishing point after and including taking down / dismantling old sub main wiring including old conduit etc of any description complete all as specified and as directed. NOTE : (i) Two run of submain wiring cable alongwith one run of earth wire and one run of PVC rigid non metallic conduit shall be measured as one length |
| 31 | Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up/ laying under ground electric cable or for pole etc complete all as specified and as directed.Note :- Mechanical excavation is not allowed in this Stn only manual excavation allowed. |
| 32 | Returning filling in and including spreading, levelling, watering and well ramming in layers not exc. 25cm thick, complete all as specified and directed. |
| 33 | Removal of excavated materials to a distance not exc. 50 meter and depositing where directed at a level not exc. 1.5 meter above the starting point complete all as specified and as directed. |
| 34 | Supply and lay in replacement for 10 sqmm one twin core flat or circular 1100 volt grade heavy duty cable insulated stranded aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed complete all as specified and directed. |
| 35 | S & F of Nature Switch Smart Timer based automatic street light control panel single phase 8 KW maintenance free along with suitable contactor single phase 8 KW and incoming / outgoing MCBs rating 20 amps 03 Nos including circuit wiring 6 sqmm, should be pole / wall mountable rust proof, electric shock proof, termite proof and FR grade thermoplastic polycorbonate enclosure (with HIGED LID) enclosure IP 66 class 2. The circuit should also have provision for manual operation (i.e, Sensor bypass option) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender