Tender For Completion Of Balance Works, Including Construction Of Intake Chamber At Headsite, Construction Of Pre-Settling Tank With Washout/Sluice Chamber, 0.05 Mgd Slow Sand Filtration Plant, 0.25 Lac Gallons special repair With Sluice Chamber, Sta
Tender Value
1.47 Crore
Estimated cost
Bid Submission
19 Oct 2026
2 days left
EMD
2.94 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Completion Of Balance Works, Including Construction Of Intake Chamber At Headsite, Construction Of Pre-Settling Tank With Washout/Sluice Chamber, 0.05 Mgd Slow Sand Filtration Plant, 0.25 Lac Gallons special repair With Sluice Chamber, Staff Quarter Including Laying And Fitting Of Pipes (Supply Mains And Distribution Network). The Work Includes Complete Testing, Trial Run And Commissioning Of The Complete Scheme, Including The Components Already Executed Under Languishing Works For Water Supply Scheme Latoo Gujran Under Ut Capex.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. (All kinds of soil): |
| 2 | Ordinary rock |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 4 | Ordinary rock |
| 5 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work.65mm Dia GI |
| 6 | 50mm Dia GI |
| 7 | 40mm Dia GI |
| 8 | 25mm Dia GI |
| 9 | 20mm Dia GI |
| 10 | 15mm Dia GI |
| 11 | 75mm Dia HDPE |
| 12 | 50mm Dia HDPE |
| 13 | 40mm Dia HDPE |
| 14 | 25mm Dia HDPE |
| 15 | 20mm Dia HDPE |
| 16 | Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages. Complete Job. 100 mm Dia GI |
| 17 | 80 mm Dia GI |
| 18 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore |
| 19 | 50 to 80 mm nominal bore |
| 20 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 80 mm nominal bore |
| 21 | 65 mm nominal bore |
| 22 | 50 mm nominal bore |
| 23 | 40 mm nominal bore |
| 24 | 25 mm nominal bore |
| 25 | Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.80mm Dia Sluice Value Class 1 |
| 26 | 100mm Dia Sluice Valve Class 1 |
| 27 | 150mm dia. Sluice Valve Class 1 |
| 28 | Provision for Pipe Specials required for pipe fittings complete, to be paid as per the actual. |
| 29 | Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing, ramming, leads and lifts and all carriages complete. |
| 30 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 31 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 32 | Providing and laying in position reinforced cement of specified grade of concrete including curing but excluding the cost of centering and shuttering, finishing and reinforcement. All works upto plinth level with :1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 33 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement with : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 34 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 35 | Reinforced cement concrete work in arches, arch ribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 36 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level |
| 37 | All works above plinth level upto floor V level |
| 38 | Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum) |
| 39 | Providing & fixing of 0.63mm thick PGI sheets at construction joints including all leads and lifts complete job as directed by Engineer-in-charge |
| 40 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 41 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 42 | R.R. Masonary with Hardstone laid in Dry without bond stone |
| 43 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 44 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level: |
| 45 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First Class KD Wood. |
| 46 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood..30mm thick |
| 47 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.30mm thick of Kail wood. |
| 48 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class Kail wood 30 mm thick |
| 49 | Centring and shuttermg including strutting, propping etc. and removal of form for· Foundations: footings, bases of columns etc. for mass concrete. |
| 50 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 51 | Suspended floors, roofs, landings, balconies and access platform. |
| 52 | Arches,domes,vaults exceeding 6m span. |
| 53 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 54 | Edges of slabs and breaks in floors and walls |
| 55 | Extra for shuttering in circular work (20% of respective centering and Shuttering items) Foundations: footings, bases of columns etc. for mass concrete. |
| 56 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 57 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 58 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 59 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 60 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete: First class Budloo/Fir wood |
| 61 | Providing and fixing of corrogated G.S. Sheets including vertical/curved surfaces with polymer coated J or L hooks (0.50mm thick). |
| 62 | Providing ridge or hip of width 60cm over all with plain G.S. Sheets fixed with polymer coated J or L hooks (0.50mm thick). |
| 63 | Providing and fixing of M.S Eves boarding 300mm wide 1 mm thick and soffit boarding including priming coat of red oxide and painting with two or more coats with synthetic paint of approved brand and manufacture complete job. |
| 64 | Providing Lid of Angle iron frame 40x40x5mm with MS sheet including all locking arrangements. |
| 65 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 66 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete= Size of tile 600x600 mm |
| 67 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.Size of tile 600x600 mm |
| 68 | CEMENT PLASTER (IN COARSE SAND)12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 coarse sand) |
| 69 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 70 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 71 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work |
| 72 | On concrete work |
| 73 | Providing and applying white cement based putty of approved thickness 1mm of approved brand and manufacture over the plastered surfaces to prepare the surface smooth and even complete. |
| 74 | Distempering with 1st quality acrylic distemper of approved brand and manufacture including applying additional coats where ever required to achive even shade. (Two Coats) |
| 75 | Painting with synthetic enamal paint of approved brand and manufacture of required colour to give even shade two or more coats on new work lincluding priming coat lof approved brand and manufacture. On woodwork |
| 76 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore |
| 77 | 20 mm nominal bore |
| 78 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 150 mm diameter |
| 79 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 80 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 81 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 82 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 83 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 84 | Supplying, installation, testing and commissioning of ISI marked electric geyser of approved make, 50 ltr storage capacity, complete with all accessories including inlet/outlet CP connections, safety valve, necessary clamps and supports, complete job in all respects as per directions of Engineer-in-Charge |
| 85 | Supplying, installation, testing and commissioning of ceiling fan complete with down rod, blades, regulator, capacitor and all accessories, including wiring connection with existing point, complete job in all respects as per directions of Engineer-in-Charge. |
| 86 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 87 | Providing Lighting points . Using wire of 1-5 sqmm, copper conductor, Multi stranded , 1100 volts, FR, for phase , neutral & earth of 1mm green colour for each point including PVC Condut pipe of reputed make including chasing of walls and making good the same Testing / Commissioning for all points upto 6 Amp) including Switches, indicators, MCB's and all connected items etc complete |
| 88 | Providing Heating Points: Upto 16 Amp using 4mm multistranded copper wire to be laid for phase and neutral but 2.5 sqmm cable for earth in green colour to be connected for all the required points/ sources ncluding Switches, indicators MCB's including PVC Condut pipe of reputed make including chasing of walls and making good the same and all connected items etc complete. |
| 89 | PP-R PIPES AND FITTINGSProviding and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge: Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 25mm OD |
| 90 | PN-16 pipe , 32mm OD |
| 91 | Providing and installation of main cable from LT pole to main panel board 4.5 core under grounds or above in PVC coduits as required incl all carriages |
| 92 | Providing and fixing of MCB-16A of Indocap complete. |
| 93 | Providing and fixing of MCBs (as per requiremet at site) distribution box 12 way main double door system ,complete job. |
| 94 | Providing and Laying Baramulla Stones of approved quality of approved stone to be laid properly in filter beds on under drainages and manifolds/central drains. The job includes all sorts of carriages, head loads and lifts complete and as per the directions of Engineer incharge. |
| 95 | Supply and filling of filter media from approved source - Gravel (Graded gravel - size ranging from 2.0mm to 40.00 mm) in filter beds. Including all carriages, complete job |
| 96 | Supply and filling of filter media from approved source - Sand (Coarse filter sand - in filter beds. Including all carriages, complete job |
| 97 | Providing/ Fixing, installation, successful commissioning of double flanged MS pipes/specials to be fabricated from MS tube heavy quality nominal thickness 6mm, conforming to relevant Indian Standard IS-1239 and/or IS 1161 read with up to date amendments. The pipe material should be of standard quality and must withstand all the anticipated design pressure ratings.The work should be leakproof and should be painted with anti corrosive red oxide primer. Complete Job. |
| 98 | Providing and fixing water closet squarting pan (Indian type with 100mm sand cast iron P or S trap, 10 lit, low level PVC flusing cistern including flushing pipe and making good the walls and floors wherever required (Orrisa pattern with intergral foot type). |
| 99 | Providing and fixing salem stainless steel kitchen sink. Size 610x510x200mm |
| 100 | Providing and fixing of PVC Waste pipe for sink including PVC waste fitting complete. (Felexible 40mm dia.) |
| 101 | Constructing vertical bunds by boulder filling (dry, hand packed tightly); including cost of stones but excluding cost of wirecrates (At Headsites) |
| 102 | Cost of Crates made of Mesh type 10x12 (D=100 mm) Zn+PVC coated. Mesh wire diameter 2.70/3.70 mm (ID/OD) (At Headsites) |
| 103 | Carriage of materials from source to road site of work by mechanical transport including loading, unloading and stacking complete. Cement and steel- 150 kms |
| 104 | Sand and 20 mm crushed aggregrate-Avg lead 150 km's |
| 105 | Crushed aggregrate 40 mm nominal size-Avg lead 25 km's |
| 106 | Bricks for average lead of 240 Kms |
| 107 | Quarry stone for average lead of 25Kms |
| 108 | 100 mm Dia GI Pipe (Avg Lead 55Kms) |
| 109 | Pipes Below 100mm Dia (Avg Lead 55Kms) |
| 110 | Carriage of materials from road site upto actual site of work by manual labour(Head Load) including loading, unloading and stacking,complete. Avg.lead 1500 mtrs. CEMENT |
| 111 | Steel |
| 112 | Sand and 20 mm crushed aggregrate. |
| 113 | Crushed aggregrate 40 mm nominal size.. |
| 114 | 100 mm Dia GI Pipe |
| 115 | GI Pipes below 100mm Dia Pipes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender