Tender For Development Of Playfield At Pehlipora-A Block Safapora Ddc 170
Tender Value
14.77 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
0 days left
EMD
29600
Bank guarantee accepted
Document Fee
700
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Playfield At Pehlipora-A Block Safapora Ddc 170
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (hydraulic excvator) in trenches for foundations, drains, pipes,cables etc (not exceeding 1.5m in width) and for shafts, wells, cesspits, and the like not exceeding 10sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m including getting out excavated earth and disposal of the same as directed in all kinds of soils |
| 2 | Provinding and laying of dry stone soling dully hand packed including watering, dressing, ramming with all carriages, loading, unloading and stacking etc complete |
| 3 | Provinding and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level in 1:4:8 mix (1cement: 4coarse sand: 8 graded stone aggregate with 20mm nominal size) with all carriages, loading, unloading and stacking etc complete job |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level1:2:4 (1 cement :2 coarse sand : 4graded stone aggregate 20 mm nominal size) |
| 6 | Carriage of materials sand/bajri by MT for and averahe lead of 10km and HL of 50m |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete upto plinth level |
| 9 | Structural steel work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete. |
| 10 | Providing and fixing of galvanized steel barbed wire mesh of standard 10-14mm gauge at three different heights @9.8kg/100m |
| 11 | Dismantelling steel work in single sections including dismembering and stacking within 50 m in lead channels angles tees and flats |
| 12 | Structural steel work in single section,using existing dismantledstructural steel including cutting hoisting fixing in position etc complete job |
| 13 | Fixing existing dismantled G.I chain link fabric fencing of mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete including painting two or more coats |
| 14 | Provision for PVCweep holes, perforated drainage pipes and filling available excavated earth/ gravel backfill as per the design given by registered structural engineer |
| 15 | Consultancy charges for registered structural designer for design RCC cantilever retainingwall part. The design shall typically include layout plans, elevations, cross sections and detailed reinforcement drawings/ schedules with detailed structural load analysis. The scope shall also include detailing of locations and size of weep holes, perforated drainage pipes and fgravel filter layers behind the stem to relieve hydrostatic pressure.The consultant will necessarily ensure that the design is such that the items so arrived at do not exceed item wise quantities in the estimate. This shall be inclusive of technical vetting charges of design by NIT/DIQC and hard copies of all field ready structural drawings in duplicate |
| 16 | Provision for dismantling of damaged length of existing concrete wall and disposal of material within 50m lead as per EIC |
| 17 | Provision for signboard and photographs and other unforeseen items Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender