Tender For Extension/ Upgradation/ Repair Of Wucma Head Quarter Office At Rajbagh.
Tender Value
20.29 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
7 days left
EMD
40580
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Extension/ Upgradation/ Repair Of Wucma Head Quarter Office At Rajbagh.
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of unskilled labour for dismantling existing panelling, any unforseen items etc incl disposal of unserviceable materials. |
| 2 | Providing and fixing including fabrication of executive office almarah-cum-cupboard upto 2 feet in depth as required made of 18mm thick HDHMR sheets including engraving whereever required including the cost of frame work etc. frames , shutters, shelves, development of inner surfaces, racks, drawyers etc using standard adhesive (Heatex , Fevicol ) & using handles ,hinges, channels ets of approved brand & manufacture including all required standrad accesseries/items, glass shelves, embossing National Emblem cum office description, concealed lighting system min 3 no lights 9 watts each including conduting, wiring, switching etc in complete job as per conceptual plan. Only front Face Measurements shall be paid. |
| 3 | Providing and applying premium quality deco paint on surfaces of HDHMR including surface cleaning, sanding, filling of minor defects, applying one coat of suitable primer/sealer, and finishing with 2–3 coats of approved PU deco paint to achieve smooth uniform finish, complete in all respects. |
| 4 | Providing and fixing false ceiling at all height including providing and Fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mmrunning at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound,jointing tapes, finishing with jointing compound in 3 layers covering upto150mm on both sides of joint and two coats of primer suitable for boardall as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing andspecification and direction of the Engineer-in-Charge but excluding the cost of painting with:Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in- charge and as per manufacturer’s specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 |
| 5 | Providing & fixing of imported Wooden Flooring 8 mm thick including all carriages from approved source up to site of work complete job inc providing of foam sheeting underneath. |
| 6 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Panch Murabah or equivalent |
| 7 | Providing & fixing of imported wood paneling on inner Walls including all carriages from approved source up to site of work complete job. |
| 8 | Providing & fixing of imported Wall Paper including chemicals & fevicol etc including all carriages from approved source up to site of work complete job superior quality. |
| 9 | Providing & fixing 12 mm ply including cost of ply for khatamband ceiling and panelling walls (complete job) with leveling & scafolding complete job. |
| 10 | French Spirit polishing, Two or more coats on new works including a coat of wood filler |
| 11 | Providing & fixing of 3''x2'' wooden Corrince for ceeling Including all carriages of material from approved source up to site of work complete job. |
| 12 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position Kiln seasoned and chemically treated hollock wood |
| 13 | Providing and fixing including fabrication of Wardroubs upto 2 feet deep as required made of 19mm thick block board frames (ISI) marked, shutters, shelves including 0.5 mm thick Dal Mica Linning on both sides exposed as well as inner surfaces using standard adhesive (Heatex , Fevicol ) & using handles ,hinges, channels ets of approved brand & manufacture and teak wood, Dal Mica including all required standrad accesseries/items complete job. Only front Face Measurements shall be paid. |
| 14 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 35 MM Kiln seasoned and chemically treated hollock wood |
| 15 | Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. |
| 16 | 100x58x1.90 mm |
| 17 | Providing & fixing ISI marked oxidized M.S tower bolts black finish (Barrel Type) with necessary screws etc complete job. mm including all carriages of material from approved source up to site of work complete job. 100x10 mm |
| 18 | Providing & fixing ISI marked oxidized M.S Handles with necessary screws etc complete job. including all carriages of material from approved source up to site of work complete job. 100 mm |
| 19 | Applying prime coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, two or more coats on new work |
| 21 | Providing and fixing including fabrication of executive office Scroll borad as required made of 18mm thick rubber wood sheets including high precission engraving whereever required including the cost of under frame work, fixtures , fastenings, tighteners, preparation of base, drilling, tensioning etc whatsoever, demonstrating engraved/embossed National Emblem cum office description, fixing border strips etc including sanding, filling of minor defects, applying one coat of suitable primer/sealer, and finishing with 2–3 coats of approved melaimne, superio or like wooden polish to achieve smooth uniform finish, complete in all respects. in complete job as directed by the engineer in charge. The item is complete and should be only paid in full as per description and not as any part thereof. |
| 22 | Providing & fixing of Electrification passing through plastic channels / conduits in 3/20, 7/16 & 7/20 wire incld. cost of channels, conduits, all required accessories/parts, nails, wiring, etc & labour charges complete job for below mentioned items with Electric Wire, Conduits and Accessories/parts of standrad quality. |
| 23 | Lighting points (1.5mm sq. wire). |
| 24 | Generator Points/Inverter Points |
| 25 | Heating Points with SS combine (4mm wire ,15 Amp). |
| 26 | Three pin Socket. |
| 27 | Fan Points with 48 inch Sweep ceiling Fans of approved quality. |
| 28 | Half Indicator Points |
| 29 | MCB DP 32- Amp |
| 30 | LED Energy saver lights, 9 W, concealed |
| 31 | LED Energy saver lights, 36 W, modular celling light |
| 32 | P/F of 20 Wtt hanging Light upto 4 feet woth all accessories inc circular shade, switching etc all complete |
| 33 | LED Energy saver lights, 36 W, modular celling light |
| 34 | Hot & Cold Split AC (Hot & Cold) Capacity: 1.5 Ton (as required) Energy Rating: 5-Star Modes: Heating & Cooling Refrigerant: R 32 eco-friendly (Superior Quality) of approved brand and manufacture.Indoor Unit: Wall-mounted; low-noise operation Outdoor Unit: Heavy-duty with copper condenserAccessories: Mounting brackets, copper pipe, drainage pipe, power cable, remote & voltage stablizer Installation: Complete installation with testing & commissioningWarranty:1-year product + 5 years compressor or above |
| 35 | Providing and fixing including fabrication of office cupboard upto 2 feet in depth as required made of 18mm thick HDHMR sheets including engraving whereever required including the cost of frame work etc. frames , shutters, shelves, development of inner surfaces, racks, drawyers etc using standard adhesive (Heatex , Fevicol ) & using handles ,hinges, channels ets of approved brand & manufacture including all required standrad accesseries/items, glass shelves, Only front Face Measurements shall be paid. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender