Housing Urban and Rular Development Government Departments Closing in 0 days TDR #57978131

Tender For Repair Renovation Of Tourist Facilities And Landscaping At Sangerwani Pulwama.

Issued by Government Departments · Pulwama, Jammu and Kashmir
Tender Value
38.99 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
0 days left
EMD
77980
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair Renovation Of Tourist Facilities And Landscaping At Sangerwani Pulwama.

BOQ

Name of Work:- Repair Renovation of Tourist Facilities and landscaping at Sangerwani Pulwama.
Sl. No. Item Description
1Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix)
2Surface Dressing of ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift 1.50 m in all kinds of soil
3Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
4Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
5Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
6P/L Nalla boulders handpacked of specified grade and size including ramming spreading and compacting with power road roller 8-10 tonne capacity and all carriages & loading/unloading complete
7Providing and laying stone soling dully Hand packed Watering ,ramming complete including carriages of all materials.
8Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.)
9Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
10Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with:1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size
11Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with:1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
12Centering and shuttering including strutting, propping etc and removal of form work. Foundations, footings, bases of columns etc. for mass concrete
13Centering and shuttering including strutting, propping etc and removal of form work for Walls any thickness including attached buttresses, plinth and string courses etc.
14Supply and hand packing stones in to wire crates 100mm x 100mm mesh (Woven diagonally) of thickness 3mm i/c laying of crates in proper position, binding top after filling of stones i/c carriages of crates and stones with loading, unloading complete i/c cost of crates, royalty, complete job Nallah Stones
15Reinforcememt for RCC works including cutting bending placing in position and binding all complete (Thermo-Mechanically Treated bars) i/c carriage and head load of grade Fe-500D or more
16Brick with FPS bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand)
17Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
18P/F of 75mm dia PVC weep holes in proper line and gradient complete job.
19Chequerred precast cement tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete on 20mm bed of cement mortar 1:4(1 cement :4 coarse sand) Ordinary cement without any pigment
20Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillarslaid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarsesand) and jointed with grey cement slurry mixed with pigment to matchthe shade of the slabs, including rubbing, polishing and curing complete.
21Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)
22Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately)
23Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction
24Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Ornamental Fencing).
25Stone tile work for wall upto 10m height with speical adhesive like araldite or equivalent over 12mm thick bed of cement mortar 1:3 (1 Cement : coarse sand ) including pointing in white cement with an admixture of pigment to match the stone shade Granite stone of any colour and shade
26Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
27Carriage of different items by machanical transport including loading/unloading.
2840mm + 20mm nominal size aggregates for an average lead of 30 Kms
29Sand for an average lead of 30 Kms
30Bricks for an average lead of 30km
31ENTRY GATE
32Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
33Providing and laying stone soling dully hand packed Watering ,ramming complete below foundation including carriages of all materials.
34Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.)
35Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and r/f. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
36Centering and shuttering including strutting, propping etc and removal of form work for Foundations, footings, bases of columns etc. for mass concrete.
37Reinforcememt for RCC works including cutting bending placing in position and binding all complete (Thermo-Mechanically Treated bars) i/c carriage and head load of grade Fe-500D or more
38Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement: 6 coarse sand) upto plinth level including curing: Fine chisel dressed
39Extra for fine chisel dressed Devri Stone in square or rectangular Pillars
40Extra for additional cost of Providing stone work in Arches including scafoiding. centering for arche, including all strutting, bolting, wedging etc and removal (area of soffit to be measured)
41Providing and laying chisel dressed Devri Stone Ornamantal Cornce of 75mm Thick with the width of 300mm-200mm in cement mortar 1: 6 (1 cement: 6 coarse sand) upto plinth level including curing: Fine chisel dressed
42Steel work in built u tubular (rouna, square or rectanguiar hollow tubes etc.) trusses/ Grill Work / Jafri Work/ Gates etc., including cuting , hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc, complete Hot finished welded type tubes
43Painting with synthetic enamel paint of approved brand and-manufacture to give an even shade two or more coats on new wood work.
44Carriage of materials by mechanical means for an average lead of 30 kms including loading unloading
45Aggregate
46Providing and fixing double scaffolding system ( cup lock type ) on the exterior side of building/ structure, upto 25 mtrs height above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 mtr.c/c, horizontal and vertical tubes joint with cup and lock system with M.s tube, M.S tubes Challis M.S clamps and stairs case system in the scaffolding for working platform etc. and maintaining it in a serviceable condition of execution of work of cleaning and/ or pointing and/or applying chemical and removing it their after the scaffolding system shall be stiffened with bracings, runners connecting with the building etc. where ever required. if feasible, for inspection of work at required location with essential safety features for the work men etc, complete as per directions and approval of Engineer-in-charge. Note: - 1) The elevational area of the scaffolding shall be measured for the payment purpose. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57978131
AUTHORITY Government Departments
TENDER VALUE 38.99 Lakhs
LAST DATE 30-10-2026
Authority
Authority Name Public Works Department
Work Description Tender for Repair Renovation Of Tourist Facilities And Landscaping At Sangerwani Pulwama.
Basic Detail
Tender No 149/EEP/RNB/of 2026-2027/7786-96 Dt.10.10.2026
Bidding Type Tender
Location
City Pulwama
State Jammu and Kashmir
Key Dates
Publish Date 10 Oct 2026
Submission Date 30 Oct 2026
Open Date 31 Oct 2026
Finance
Tender Value 38.99 Lakhs
Tender Fee 1100
EMD 77980
Exemption Not Available
Document List
7ae01595-6b0c-4ede-a74d-6ab9f8406ecb.html
BOQ_1109182.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 31, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Today

Tender Documents

Download All (ZIP) ↓
html

7ae01595-6b0c-4ede-a74d-6ab9f8406ecb.html

xls

BOQ_1109182.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender