Tender For Construction Of Box Culvert 2X3x3 M Span At Musaila Bhagalpur Road To Lakhana Link Road Km 4.
Tender Value
49.50 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
4 days left
EMD
4.48 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Deoria → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Box Culvert 2X3x3 M Span At Musaila Bhagalpur Road To Lakhana Link Road Km 4.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material..Reference to MORD Specification 304 Sr No.15.01. (Excluding GST) |
| 2 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per clause 401. (Excluding GST) |
| 3 | Plain Cement Concrete M-15 in Open Foundation complete as per Drawing and Technical Specifications.Reference to MORD Specification1500, 1700 & 2100 Sr No.15.11. (Excluding GST) |
| 4 | Reinforced Cement Concrete (Grade M25) in Open Foundation complete as per Drawing and Technical Specifications.Reference to MORD Specification 1500, 1700 & 2100 Sr No.15.11. (Excluding GST) |
| 5 | Reinforced Cement Concrete (Grade M25) for wall & slab etc. complete as per Drawing and Technical Specifications..Reference to MORD Specification 1500, 1700 & 2100 Sr No.15.12. (Excluding GST) |
| 6 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation/Wall/Slab complete as per Drawing and Technical Specifications. Reference to MORD Specification 1600 Sr No.15.13.. (Excluding GST) |
| 7 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. Reference to MORD Specification 2706 & 2200 Sr No.15.14. (Excluding GST) |
| 8 | Drainage Spouts complete as per drawing and Technical specification. Reference to MORD Specification 2705 Sr No.15.17. (Excluding GST) |
| 9 | Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications Reference to MORD Specification 2702 Sr No.15.18 (Excluding GST) |
| 10 | Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification Reference to MORD Specification710.1.4.of IRC:78 & 2200 Sr No.13.9. (Excluding GST) |
| 11 | Approach Road Earth work in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 0.5m in depth and earthwork in embankment to be in 20cm. layers, including ramming and dessing the surface to required levels & slopes & also including 1.5m. lift & 30m. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m. Distance as directed by the engineer-in-charge.(Excluding GST) |
| 12 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per clause 401.(Excluding GST) |
| 13 | Providing, laying, WBM Grade-2 with 45-63mm size Stone Ballast, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled smooth roller 8-10 tonnes in stages to proper grade and camber, applying and brooming, stone screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per clause 405.2 (Including all taxes required & i/c hire charges of road roller). (Excluding GST) |
| 14 | Providing, laying, WBM Grade-3 with 22.4-53mm size Stone Ballast, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled static roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. Grading 3 as per clause 405.3 (Including all taxes required & i/c hire charges of road roller). (Excluding GST) |
| 15 | Brick edging on both sides of the road of first class bricks 8 cm (3\\") wide and 12 cm. 4½\\"deep laid with mud mortar including labour and supply of. bricks finished to required template and proper alignment and also including dressing and ramming the cavated earth as directed by Engineer-in-Charge.(Excluding GST) |
| 16 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. as per Technical Specification Clause 503 (Including all taxes required & including Cost of bitumen Emulsion SS2). (Excluding GST) |
| 17 | Providing and applying tack coat with bitumen (VG-10) using pressure distributor at the rate of 0.35 kg per sqm on the prepared bituminous/granular surface treated with primer & cleaned with hydraulic broom as per Technical Specification Clause 503 (Including all taxes required & including Cost of bitumen VG-10). (Excluding GST) |
| 18 | Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades. (Including all taxes required and hire charges of road roller & including Cost of bitumen ).(Excluding GST) |
| 19 | Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 (Including all taxes required and hire charges of road roller & including Cost of bitumen ).(Excluding GST) |
| 20 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 (3.4)(Excluding GST) |
| 21 | Protection work Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. Reference to MORT&H Specification 2503 Sr No.16.01. (Excluding GST) |
| 22 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification Reference to MORT&H Specification 2504 Sr No.16.05. (Excluding GST) |
| 23 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.Reference to MORT&H Specification 2504 Sr No.16.04.(Excluding GST) |
| 24 | Diversion Supply and laying of 1000 mm NP-3 hume pipe. including cost of all materials, loading, unloading etc. (Excluding GST) |
| 25 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.Reference to MORT&H Specification 305 Sr No.3.16. (Excluding GST) |
| 26 | First class brick on edge floor laid dry joint sand filled including preparation of baseto proper slope and its ramming and including supply of all materials, labour and T&P etc. required for proper complition of the work. (Excluding GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender