Petroleum and Natural Gas Boards / Undertakings / PSU Closing in 18 days TDR #57975693

Bids Are invited for Procurement Of Low Temperature Moisture Separation System - Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components Including, Assembly At Shop, Inspection, Testing At Manufacturers Works, Packing & S

Issued by Boards / Undertakings / PSU · Dibrugarh, Assam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Nov 2026
18 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Not Available
Quantity
1

Project Description

Bids Are invited for Procurement Of Low Temperature Moisture Separation System - Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components Including, Assembly At Shop, Inspection, Testing At Manufacturers Works, Packing & Supply Of Air-Cooled Refrigeration Unit (R-001) With Chilled Cooling Water Circulation System Of Suitable Capacity (To Be Specified In Tr) As Per Technical Description, P&Id, Datasheet Along With All The Instrumentation, Control Panel, Interconnecting Piping, Insulation, Fitting & Valve Etc Including Supply Of All Commissioning Spares, Special Tools And Tackles , Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components Including, Assembly At Shop, Inspection, Testing At Manufacturers Works, Packing & Supply Of Item 2.1 & 2.2 As Per Technical Description, P&Id, Datasheet Along With All The Instrumentation, Control Panel, Interconnecting Piping, Insulation, Fitting & Valve Etc Including Supply Of All Commissioning Spares, Special Tools And Tackles , Gas To Gas Heat Exchanger (Economizer) (E-001) , Chilled Water To Gas Heat Exchanger (Gas Cooler) (E-002) , Gaskets For All Flange Joints As Mandatory Spares For Item No. 2.1 & 2.2. , Fasteners For All Flange Joints As Mandatory Spares 20% (Min. 04 Nos. Of Each Size & Type) For Item No. 2.1 & 2.2. , Gaskets For All Flange Joints As Pre-Commissioning & Commissioning Spares For Item No. 2.1 & 2.2. , Fasteners For All Flange Joints As Pre-Commissioning & Commissioning Spares 10% (Min. 02 Nos. Of Each Size & Type) For Item No. 2.1 & 2.2. , Supervision Of Erection, Pre-Commissioning, Commissioning And And Training Of Company O&M Personnels At Site Of Item No. 1, 2.1 & 2.2.Note: I. All Expenses Towards Travel, Lodging, Food, Boarding For Supervision At Site Shall Be In Bidder Scope. Bidder Shall Quote Accordingly. Ii. Erection By Others.

BOQ

Sl. No. Item TitleItem Description
1Design, engineering, manufacture, procurement of materials and bought out components including, assembly at shop, inspection, testing at manufacturer's works, packing & supply of Air-Cooled Refrigeration Unit (R-001) with chilled cooling water circulation system of suitable capacity (to be specified in TR) as per technical description, P&ID, datasheet along with all the instrumentation, control panel, interconnecting piping, insulation, fitting & valve etc including supply of all commissioning spares, special tools and tacklesDesign, engineering, manufacture, procurement of materials and bought out components including, assembly at shop, inspection, testing at manufacturer's works, packing & supply of Air-Cooled Refrigeration Unit (R-001) with chilled cooling water circulation system of suitable capacity (to be specified in TR) as per technical description, P&ID, datasheet along with all the instrumentation, control panel, interconnecting piping, insulation, fitting & valve etc including supply of all commissioning spares, special tools and tackles
2Design, engineering, manufacture, procurement of materials and bought out components including, assembly at shop, inspection, testing at manufacturer's works, packing & supply of Item 2.1 & 2.2 as per technical description, P&ID, datasheet along with all the instrumentation, control panel, interconnecting piping, insulation, fitting & valve etc including supply of all commissioning spares, special tools and tacklesDesign, engineering, manufacture, procurement of materials and bought out components including, assembly at shop, inspection, testing at manufacturer's works, packing & supply of Item 2.1 & 2.2 as per technical description, P&ID, datasheet along with all the instrumentation, control panel, interconnecting piping, insulation, fitting & valve etc including supply of all commissioning spares, special tools and tackles
3Gas to Gas Heat Exchanger (Economizer) (E-001)Gas to Gas Heat Exchanger (Economizer) (E-001)
4Chilled Water to Gas Heat Exchanger (Gas Cooler) (E-002)Chilled Water to Gas Heat Exchanger (Gas Cooler) (E-002)
5Gaskets for all flange joints as Mandatory Spares for Item no. 2.1 & 2.2.Gaskets for all flange joints as Mandatory Spares for Item no. 2.1 & 2.2.
6Fasteners for all flange joints as Mandatory Spares 20% (Min. 04 Nos. of each size & type) for Item no. 2.1 & 2.2.Fasteners for all flange joints as Mandatory Spares 20% (Min. 04 Nos. of each size & type) for Item no. 2.1 & 2.2.
7Gaskets for all flange joints as Pre-commissioning & Commissioning Spares for Item no. 2.1 & 2.2.Gaskets for all flange joints as Pre-commissioning & Commissioning Spares for Item no. 2.1 & 2.2.
8Fasteners for all flange joints as Pre-commissioning & Commissioning Spares 10% (Min. 02 Nos. of each size & type) for Item no. 2.1 & 2.2.Fasteners for all flange joints as Pre-commissioning & Commissioning Spares 10% (Min. 02 Nos. of each size & type) for Item no. 2.1 & 2.2.
9Supervision of erection, pre-commissioning, commissioning and and training of Company O&M personnels at site of item no. 1, 2.1 & 2.2.Note: i. All expenses towards travel, lodging, food, boarding for Supervision at site shall be in bidder scope. Bidder shall Quote accordingly. ii. Erection by others.Supervision of erection, pre-commissioning, commissioning and and training of Company O&M personnels at site of item no. 1, 2.1 & 2.2.Note: i. All expenses towards travel, lodging, food, boarding for Supervision at site shall be in bidder scope. Bidder shall Quote accordingly. ii. Erection by others.

AI Tender Summary

OUR REF NO 57975693
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 05-11-2026
Authority
Authority Name Dnp Limited
Work Description Bids Are invited for Procurement Of Low Temperature Moisture Separation System - Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components Including, Assembly At Shop, Inspection, Testing At Manufacturers Works, Packing & Supply Of Air-Cooled Refrigeration Unit (R-001) With Chilled Cooling Water Circulation System Of Suitable Capacity (To Be Specified In Tr) As Per Technical Description, P&Id, Datasheet Along With All The Instrumentation, Control Panel, Interconnecting Piping, Insulation, Fitting & Valve Etc Including Supply Of All Commissioning Spares, Special Tools And Tackles , Design, Engineering, Manufacture, Procurement Of Materials And Bought Out Components Including, Assembly At Shop, Inspection, Testing At Manufacturers Works, Packing & Supply Of Item 2.1 & 2.2 As Per Technical Description, P&Id, Datasheet Along With All The Instrumentation, Control Panel, Interconnecting Piping, Insulation, Fitting & Valve Etc Including Supply Of All Commissioning Spares, Special Tools And Tackles , Gas To Gas Heat Exchanger (Economizer) (E-001) , Chilled Water To Gas Heat Exchanger (Gas Cooler) (E-002) , Gaskets For All Flange Joints As Mandatory Spares For Item No. 2.1 & 2.2. , Fasteners For All Flange Joints As Mandatory Spares 20% (Min. 04 Nos. Of Each Size & Type) For Item No. 2.1 & 2.2. , Gaskets For All Flange Joints As Pre-Commissioning & Commissioning Spares For Item No. 2.1 & 2.2. , Fasteners For All Flange Joints As Pre-Commissioning & Commissioning Spares 10% (Min. 02 Nos. Of Each Size & Type) For Item No. 2.1 & 2.2. , Supervision Of Erection, Pre-Commissioning, Commissioning And And Training Of Company O&M Personnels At Site Of Item No. 1, 2.1 & 2.2.Note: I. All Expenses Towards Travel, Lodging, Food, Boarding For Supervision At Site Shall Be In Bidder Scope. Bidder Shall Quote Accordingly. Ii. Erection By Others.
Basic Detail
Tender No GEM/2026/B/8125627
Bidding Type Tender
Location
City Dibrugarh
State Assam
Key Dates
Publish Date 12 Oct 2026
Submission Date 05 Nov 2026
Open Date 06 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
844fcfee-5ac8-45e7-a0ee-004469ef3e91.pdf
1791349648.xlsx
p206_volume_ii_of_ii_ltmss_2026-10-07-10-05-17_04249e8d2cafdf1a19ad4c7baad180ce.pdf
1791348648.pdf
1791349417.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Nov 06, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
pdf

844fcfee-5ac8-45e7-a0ee-004469ef3e91.pdf

xlsx

1791349648.xlsx

pdf

p206_volume_ii_of_ii_ltmss_2026-10-07-10-05-17_04249e8d2cafdf1a19ad4c7baad180ce.pdf

pdf

1791348648.pdf

pdf

1791349417.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender