Tender For Providing Of Toilet And Pol Store At Various Loocations At Afs Under Ge (Af) Jorhat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Nov 2026
15 days left
EMD
86520
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Toilet And Pol Store At Various Loocations At Afs Under Ge (Af) Jorhat
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) for all kind of soil, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed. |
| 3 | All as per Serial item No. 2 here-in-before but depth exc. 1.5m but not exc. 3.0m. |
| 4 | Excavating in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sq.m on plan and n. exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 5 | Materials and labour for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, floor and mass concrete complete all as specified and as directed. |
| 6 | Materials and labour for reinforced cement concrete, M-25 (Design Mix) (20mm stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 7 | Materials and labour for reinforced cement concrete, M-25 (Design Mix) (20mm stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 8 | Materials and labour for reinforced cement concrete, M-25 (Design Mix) (20mm stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 9 | Materials and labour for reinforced cement concrete, M-25 (Design Mix) (20mm stone aggregate) as in chajja and the like complete all as specified and as directed. |
| 10 | Materials and labour for reinforced cement concrete, M-25 (Design Mix) (20mm stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 11 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and as directed. |
| 12 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete complete all as specified and as directed. |
| 13 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete all as specified and as directed. |
| 14 | Formwork to sides of pillars, posts, struts, piers, columns and stanchion, etc. for fair finished surfaces of concrete complete all as specified and as directed. |
| 15 | Materials and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 16 | All as per Serial item No. 15 here-in-before but 6mm to 8mm dia. |
| 17 | All as per Serial item No. 15 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, etc. |
| 18 | Materials and labour for brick work with sub class 'B' bricks, straight or curved on plan, exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. |
| 19 | Materials and labour for brick work with sub class 'B' bricks, straight or curved on plan, to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed. |
| 20 | Materials and labour for cutting into existing manholes for connecting new drains, making good to 150mmm bore pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) smooth finished, and reforming benching as required complete all as specified and as directed. |
| 21 | Materials and labour for 15mm thick rendering in cement mortar (1:4) as on fair faces of brick work or concrete surfaces using water proofing compound finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.Note : WPC to be measured and paid seperately under relevant item. |
| 22 | Materials and labour for 15mm thick rendering in cement mortar (1:6) as on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 23 | Materials and labour for rendering 5mm thick in cement mortar (1:3) on concrete surfaces as on ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 24 | Supply only integral water proofing compound confirming to IS and as approved make complete all as specified and as directed. |
| 25 | Materials and labour for preparation of newly plastered surfaces of wall applying two coats of oil bound distemper over and including one coat of alkali resistant primer complete all as specified and as directed. |
| 26 | Materials and labour for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over and including one coat of alkali resistant primer complete all as specified and as directed. |
| 27 | Materials and labour for preperation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 28 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/loose soil complete all as specified and as directed. |
| 29 | Materials and labour for spreading, levelling and well ramming soils in layers not exc. 25cm thick including watering in floor area as required complete all as specified and as directed. |
| 30 | Materials and labour for machine cut kota stone slab flooring, 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 31 | Materials and labour for machine cut kota stone slab flooring, 20-25mm thick as on riser of steps, skirting, dado and pillar, etc. laid over and and jointed over and including 10mm thick screed bed/bedding in cement mortar (1:3) complete all as specified and as directed. |
| 32 | Materials and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed or bedding layer 15mm thick in cement mortar (1:4) complete all as specified and as directed. |
| 33 | Materials and labour for non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid, over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 34 | Materials and labour for glazed ceramic coloured tiles as on vertical surfaces of size, 350x 250x 7mm/ 450X 350X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed. |
| 35 | Materials and labour for 25mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in bases of floors complete all as specified and as directed. |
| 36 | Materials and labour for 75mm thick plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in bases of floors complete all as specified and as directed. |
| 37 | Materials and labour for 75mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed. |
| 38 | Materials and labour for hardcore of gauge n exc. 63 mm, deposited spread and levelled in layers n. exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 39 | Materials and labour for APP based polymeric membrane, minimum weighing 3.0 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (Wt not less than 150 gms/sqm), laid on primed surface with side over lap of 80mm and end overlap of 100mm using bitumen torch or by LP gas torching and sealing all joints, etc. and ensuring complete thermo fusing and applying one coat of aluminum paint over it complete all as specified and as directed. |
| 40 | Materials and labour for applying evenly a coat of bitumen primer @ 0.25 litre/Sqm by the same membrane manufacturer of density 25°C, 0.87 to 0.89 litre and viscosity 70-160 cps after properly cleaning the surfaces of rendering complete all as specified and as directed. |
| 41 | Materials and labour for anti termite treatment the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed. |
| 42 | Materials and labour for anti termite treatment treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed. |
| 43 | Materials and labour for anti termite treatment treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed. |
| 44 | Materials and labour for anti termite treatment treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed. |
| 45 | Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, steel peg stay with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 46 | Supply and fix steel windows with side hung shutters with box type hinges shutters with steel handle and steel peg stay without glazing bars, dovetailed or welded complete all as specified and as directed. |
| 47 | Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay, etc. complete all as specified and as directed. |
| 48 | Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 49 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window and door as in new door/window complete all as specified and as directed. |
| 50 | Supply and fix 4mm thick sheet glass, figured glass, pin headed type, glazing with oil putty in squares n. exc. 0.5 Sqm each pane complete all as specified and as directed. |
| 51 | Supply and fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W, Gde E-250 complete all as specified and as directed. |
| 52 | Supply and fix 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed. |
| 53 | Materials and labour for applying two coats of synthetic enamel paint over and including one coat of red oxide primer after preparation of new steel surfaces over 10cm girth or width complete all as specified and as directed. |
| 54 | Materials and labour for factory made solid PVC door frame of size 50mmx47mm, made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling and fixing in opening as per specification and drawing shown in SSR Part-II as approved complete all as specified and as directed. |
| 55 | Supply and fix factory made solid panel PVC door shutter, 30mm thick (style) connecting of frame, made out of MS tube for top and bottom rail. MS frame shall be coverd with heat moulded plain coour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail panelling of plain colour PVC to be fitted in the ms frame welded/sealed in the stiles and rail with suitable PVC sheet and beading and jointed together with solvent cement complete all as specified and as directed. |
| 56 | Supply and fix for aluminium anodised powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed |
| 57 | Supply and fix powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door/ window/ ventilator shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, etc. complete all as specified and as directed. |
| 58 | Supply and fix 75mm long butt hinges \\"medium weight\\" cold rolled mild steel complete all as specified and as directed. |
| 59 | All as per Serial item No.58 here-in-before but 100mm long. |
| 60 | Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 61 | All as per Serial item No.60 here-in-before but of 150mm long. |
| 62 | Supply and fix 100mm size extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed. |
| 63 | All as per Serial item No.62 here-in-before but of size 150mm. |
| 64 | Supply and fix 250mm long aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed. |
| 65 | Supply and fix pillar taps of size 15mm bore, cast copper alloy with capstan heads,fancy type, swan neck, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 66 | Supply and fix bib taps of size 15mm bore, chromium plated, fancy type, cast copper alloy, with crutch or butterfly screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 67 | Supply and fix two way CP bib taps of size 15mm bore, screwed for iron pipe or for brass ferrule with necessary fittings complete all as specified and as directed. |
| 68 | Supply and fix 15mm bore stop valves, castcopper alloy,screwed down, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. |
| 69 | Supply and fix 15mm dia PVC connection pipe with PTMT nuts of length 600mm complete all as specified and as directed. |
| 70 | Supply and fix 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball, screwed for iron pipe (Minimum weight 20 - 210 gms) complete all as specified and as directed. |
| 71 | Supply and fix 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 72 | Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white with 'P' trap white (excluding fixing bolts, flushing cistern and flush pipe) including pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and as directed. |
| 73 | Supply and fix plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device as approved complete all as specified and as directed. |
| 74 | Supply and fix health faucet (ABS body) mild steel chromium plated, suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 75 | Supply and fix 10 litres capacity PVC low level syphonic action type flushing cistern, white with inlet, ball valve, float and handle including brackets, flushing pipe and making connection to pipes complete all as specified and as directed. |
| 76 | Supply and fix of oval shaped sunk type wash hand basin of approved make and size, made of vitreous china, including all necessary cutting, fixing, sealant, brackets/supports, waste coupling, bottle trap and connections to existing water supply and drainage, complete with all fittings and accessories complete all as specified and as directed. |
| 77 | Supply and fix 8mm thick looking glass mirror, frameless type with bevelled and chamfered edges, machine polished of aaproved quality, fixed over wall with approved mirror adhesive/mirror screws complete all as specified and as directed. |
| 78 | Supply and fix Vitreous China urinals, bowl type (back to corner wall type), half stall urinal complete including providing and fixing plus, bedding urinal against wall in cement mortar (1:2) securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl Waste coupling of PTMT suitable for urinals, (Minimum weight 32mm-45gms) complete all as specified and as directed. |
| 79 | Supply and fix Vitreous china urinal partition white of size 310x700 mm above 40cm from floor line complete all as specified and as directed. |
| 80 | Supply and fix 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kg/cm2, laid in trenches complete all as specified and as directed. |
| 81 | Supply and fix 32mm dia waste coupling of CP (half or full threaded) (Minimum weight 32mm-45gms/40mm-60gms) for WHB complete all as specified and as directed. |
| 82 | Supply and fix rotational moulded polyethylene (HDPE) water storage tank of 500 litre capacity (cylindrical vertical with closed top), black in colour, three layered construction, hoisted and fixed in position all specified in MES Schedule Part-I complete all as specified and as approved. |
| 83 | Supply and fix chromium plated gratings of size 100mm complete all as specified and as directed. |
| 84 | Supply and fix 15mm bore GI tubing \\"medium grade\\" galvanised, with all fitting and fixed complete to walls & ceiling or laid in floors, complete all as specified and as directed. |
| 85 | Supply and fix 20mm bore GI tubing, \\"medium grade\\", with all fitting and fixed complete to walls & ceiling or laid in floors complete all as specified and as directed. |
| 86 | Materials and labour for 150mm bore reinforced concrete pipes, class NP2, laid in trenches and jointed collars complete all as specified and as directed. |
| 87 | Materials and labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in trenches for 150mm bore of pipe complete all as specified and as directed. |
| 88 | Supply and fix for tubular towel rail brass chromium plated 20mm dia, 'D' type, 60cm long between flanges fixed with wooden gutty and steel screws complete all as specified and as directed. |
| 89 | Supply and fix stainless steel toilet paper holder with flat recessed type complete all as specified and as directed. |
| 90 | Supply and fix Soap dish vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium plated brass screws complete all as per specified and as directed. |
| 91 | Supply and fix brass chromium plated bottle traps of size 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as per specified and as directed. |
| 92 | Supply and fix corner glass shelf (with bracket) of approved make made of 8mm thick clear toughened glass of triangular/curved shape with machine polished edges complete with SS 304 grade/brass chrome plated brackets, supports, guards rails and all fixing accessories including screws, rawl plugs, washers, etc. fixed to wall in cement concrete/brick masonry surface at required height and allignment including drilling of holes and making good disturbed surfaces to match existing finish complete all as specified and as directed. |
| 93 | Materials and labour for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base and mass concrete complete all as specified and as directed |
| 94 | Materials and labour for PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sides of path, rounded or chamfered on edges complete all as specified and as directed |
| 95 | Materials and labour for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in path, steps, etc. complete all as specified and as directed. |
| 96 | Materials and labour for factory made chequered cement concrete tiles of size 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry as in floors with white cement and pigment to match as in floors over and including 20mm thick screed bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 97 | Supply and fix 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 98 | Supply and fix 75mm dia PVC (SWR) vent cowl complete all as specified and as directed. |
| 99 | Supply and fix 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 100 | Supply and fix 110mm dia PVC (SWR) bends any radius complete all as specified and as directed. |
| 101 | Supply and fix 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 102 | Supply and fix 75mm dia PVC (SWR) bends any radius complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 103 | Supply and fix 75mm dia PVC (SWR) bends any radius complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender