Tender For Special Repair T0 Bldg No P-53 (Jco Md Accn) At 1 Fod And Other Sanction Work Under Ge (South) Udh Ur
Tender Value
38.24 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
5 days left
EMD
76500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair T0 Bldg No P-53 (Jco Md Accn) At 1 Fod And Other Sanction Work Under Ge (South) Udh Ur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : SPL REPAIR T0 BLDG NO P-53 (JCO MD ACCN) AT 1 FOD AND OTHER SANCTION WORK UNDER GE (SOUTH) UDHAMPUR Contract No: CA NO : GE/S(U)-102/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and specified and Engr-in-charge. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), all as specified and specified and Engr-in-charge. |
| 4 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge. |
| 5 | Taking down 15 mm Bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified of the following description all as specified and specified and Engr-in-charge. |
| 6 | Taking down 20 mm Bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified of the following description all as specified and specified and Engr-in-charge. |
| 7 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises all as specified and specified and Engr-in-charge. |
| 8 | Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia upto 100mm. all as specified all as specified and specified and Engr-in-charge. |
| 9 | Dismantling water tanks and removing to store exc 500 & n.exc 1000 ltrs of capacity. all as specified and specified and Engr-in-charge. |
| 10 | Demolition of reinforced cement concrete in roof floor (other than ground floors) beams staircase, landing chajja and similar work complete all as specified and specified and Engr-in-charge. |
| 11 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and specified and Engr-in-charge. |
| 12 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and specified and Engr-in-charge. |
| 13 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and specified and Engr-in-charge. |
| 14 | Demolition and breaking up 150mm dia SGSW/ AC or reinforced conerete pipes set in cement mortar and taking out of trenches complete all as specified and specified and Engr-in-charge. |
| 15 | Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work,complete all as specified and specified and Engr-in-charge. |
| 16 | Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar all as specified and specified and Engr-in-charge. |
| 17 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation and any type of soil etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out all as specified and specified and Engr-in-charge. |
| 18 | Returning, filling including spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil all as specified and specified and Engr-in-charge. |
| 19 | Removing excavated material (soils) not exceeding 50 m depositing where directed at a level not exceeding 1.5m above the starting point all as specified and specified and Engr-in-charge. |
| 20 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and specified and Engr-in-charge. |
| 21 | M&L for glazed coloured ceramic tiles in dado/vertical surface size 450mmX300mm/600mmx300mm 7 to 8 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and specified and Engr-in-charge. |
| 22 | M&L Non - Skid Ceramic tiles (square/rectangular) (size 300x300x7 to 8 mm thick joint free)area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and specified and Engr-in-charge. |
| 23 | M&L for Non skid coloured tiles (square/rectengular) (size 600x600x 8 to 10 mm thick joint free) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and specified and Engr-in-charge. |
| 24 | All as per item no. 22 but on vertical surfaces as in skirting including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and specified and Engr-in-charge. |
| 25 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified and specified and Engr-in-charge. |
| 26 | Providing and fixing Internal stair Steps,tile size 1200mmX600mm,8 to 10mm thick Non-slip edge with original groove, grey marble Mat finish ceramic tile, of approved make and quality, laid on 20 mm thick cement mortar (1:4) bed, including grouting with matching shade cement, cutting, edge finishing, alignment, slope, and proper fixing on stair tread complete all as specified and directed by Engineer-in-Charge. |
| 27 | Providing and fixing skirting, using ceramic tiles size 1200mmX600mm,8 to 10mm thick of approved make, colour and finish (Mat finish), of size as approved, including cutting, chamfering, edge finishing and fixing in position on 10–12 mm thick cement mortar (1:3), including grouting with matching shade cement slurry, joints finishing, curing, complete all as specified and directed by Engineer-in-Charge. |
| 28 | Providing and fixing Internal stair Steps,tile with nosing in one piece, Non-slip edge with original groove, grey marble grey marble Mat finish ceramic tile, of approved make and quality, laid on 20 mm thick cement mortar (1:4) bed, including grouting with matching shade cement, cutting, edge finishing, alignment, slope, and proper fixing on stair tread complete all as specified and directed by Engineer-in-Charge. |
| 29 | Providing and fixing skirting,riser using ceramic tiles of approved make, colour and finish (grey marble Mat finish)), of size as approved, including cutting, chamfering, edge finishing and fixing in position on 10–12 mm thick cement mortar (1:3), including grouting with matching shade cement slurry, joints finishing, curing, complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L for green marble work 14 to 16 mm thick (table rubbed and polished, moulding ) in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade other than black and white (Shade-Green) complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L for Rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement including mixing integral water proofing compound or ( using WPC @ 3% of wt cement ) in the proportion as mentioned in manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed by Engineer-in-Charge. |
| 33 | M&L Rendering 5 mm thick in cement mortar 1:3, mixed with water proofing compound, on concrete surfaces /PCC solid Block masonary, trowelled to even and smooth finish withour using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 35 | Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 36 | Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete, of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L factory-made solid core flush door shutter (conforming to IS: 2202 - Part 1), single leaf, 30 mm thick (or as specified), Non decorative with natural wood veneer facing on both sides with horizontal grain pattern.The core of the shutter shall be constructed using well-seasoned blockboard / timber battens, chemically pressure-treated for termite, borer, and fungus resistance, and hot-pressed with synthetic resin adhesive (BWP grade as per IS: 848).The shutter edge shall be lipped with matching seasoned hardwood lipping around the perimeter. The surface shall be finished with clear melamine / PU polish/putty, including necessary cutting, jointing, and fitting to the existing frame, but excluding hinges, lock, and hardware fittings, complete in all respects as per directions of Engineer-in-Charge. Make :-Green ply ,century ply , salvan ply |
| 38 | S&F factory made, 2nd class Soft wood 30 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 40 | Description all as per Srl Item No.29 here in before but without glazing bar complete all as specified and directed by Engineer-in-Charge.Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 41 | S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.Note :- i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately |
| 42 | Description all as per item as above here in before but without glazing bar complete all as specified.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately |
| 43 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified and directed by Engineer-in-Charge. |
| 44 | S&F 4 mm thick sheet glass ordinary quality and glazing with silicon sealant or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F 4 mm thick sheet glass frosted ordinary quality and glazing with silicon sealant or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F stainless steel wire cloth 0.36mm nominal and average width of apreture 1.40mm and fixed with tinned teaks or wire staple complete all as specified and directed by Engineer-in-Charge. |
| 47 | M&L for rolled mild steel work of angle iron as in frames of doors,coolar stand & Cup Board, etc conforming to grade Fe 410-O or Fe-310-O complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F Hard Drawn steel wire fabric cut to length bent to shape required and tying,welding to the angle iron frame etc complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F 18-19mm thick ISI, termite proof , chemically well pressed, HDHMR board Both side decorative choice lamination fixed with screws to frame work with wooden scantling for kitchen cabinetstand cup boards etc includimg 6mm thick wood beading all around complete all as specified and directed by Engineer-in-Charge. Make :- Win Tuff or its equevelent |
| 50 | M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. Note PCC Bond Stone shall be paid separately under appropriate item and volume of bond stone shall be deducted. |
| 51 | All as per item No 49 above but except stone. |
| 52 | M&L for Precast cement concrete Block (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in bond stones set in cement mortor 1:6 all as specified and directed by Engineer-in-Charge. |
| 53 | Extra over stone walling for hammer dressing with miximum depression on face from straight edge held against the dressed surface not exceeding 20 mm to face stones (Granite or Trap stone) and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto courses complete all as specified and directed by Engineer-in-Charge. |
| 54 | M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified and directed by Engineer-in-Charge. |
| 55 | M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 but except bricks all as specified and directed by Engineer-in-Charge. |
| 56 | M&L half brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4 all as specified and directed by Engineer-in-Charge. |
| 57 | M&L Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 (12.5mm graded aggregate) complete all as specified and directed by Engineer-in-Charge. |
| 58 | Water proofing treatment to the sunken portion applying two coat of two component (1 part Polymer and second part cementations powder) cementations, polymer modified elastomeric, water proofing coating composed of cement, properly selected and graded aggregates, additive and acrylic emulsion polymer as a binder apply first coat of (mix and application as per manufacturer's instructions) all over floor surface/prepared surface and apply to vertical surface up to 15 cm from tilling level, allow to dry 4 to 6 hours. Prepare for apply 2nd coat perpendicular to first coat and allow to dry 4 to 6 hours. All joints of Trap/WC/Soil pipe shall be Properly sealed with ceiling compound/polymer modified mortar using Dr Fixit Pidicrete URP or equivalent, Slope of slab shall be towards and including GI pipe 50 mm dia of suitable length Spout pipe. Providing 15 mm protective screed with cement mortar in 1.3 with WPC (Make: Dr Fixit LW+ or equivalent) within 2 to 3 days of second coat complete all as specified as per manufacture instructions. Make: Dr Fixit Pidifin 2K or other equivalent make complete all as specified and directed by Engr-in-Charge. Note : Water proofing treatment will be done by manufacturer of acrylic based polymer modified cementitious composite compound or through their authorised specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage,otherwise no payment shall be made to the contractor if water proofing is executed otherwise. |
| 59 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F 250 mm Stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge. |
| 61 | S&F continuous MS CP piano type hinges 30mm flap (when opened), bright finish or electrogalvanised complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F 100mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F for 150mm size Stainless steel barrel tower bolt of extruded section and fixed.all as specified and directed by Engineer-in-Charge. |
| 64 | S&F for 150mm size Stainless steel handle of febricated type and fixed.all as specified and directed by Engineer-in-Charge. |
| 65 | S & F 140mm Floor door stopper of Stainless steel body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply and fixing of Stainless steel cold rolled butt hinges medium weight 100 mm log fixed to steel /angle iron frame by welding ,if required complete all as specified and directed by Engineer-in-Charge. |
| 67 | Supply and fixing of Stainless steel cold rolled butt hinges medium weight 75 mm log fixed to steel /angle iron frame by welding ,if required complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F 250mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F Stainless steel barrel tower bolts, stove enamelled black, with bright bolt 200mm long. all as specified and directed by Engineer-in-Charge. |
| 70 | S&F in repairs Stainless steel , 25mm dia Curton rod , with fixing stainless steel brackets, stops, rollers etc alongwith holding for brakets & end caps complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings all as specified and directed by Engineer-in-Charge. |
| 72 | S&F factory made solid panel PVC moulded door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F vitreous China wash basin , white, flat back, size 550x400mm excluding tap, chain, plug but including brackets , padestel , waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge. |
| 74 | S&F for 600mmx450mm mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. |
| 75 | M&L for preparation of wooden surfaces exceeding 10 cms width or girth, filling with wood putty, applying one coat of pink primer and two coats of synthetic enamel paint of approved shade, to give a smooth finish, complete all as specified and as directed by Engineer-in-charge |
| 76 | M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified and directed by Engineer-in-Charge. |
| 77 | M&L for new plastered surfaces and applying two coats of white washing on ceiling including preparation of new/old plastered surfaces complete all as specified and directed by Engineer-in-Charge. |
| 78 | M&L for preparation old plastered surfaces and applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 79 | M&L two coats of oil bound distemper on walls including preparation on new surfaces including applying 1to 2 mm thick layer of wall putty on walls to give uniform surface complete all as specified and directed by Engineer-in-Charge. Note :- (Before applying of wall care putty, complete removing of treatment as directed and approved by Engr-in-charge). |
| 80 | M&L two coats of oil bound distemper on walls including preparation on old surfaces including applying 1 to 2 mm thick layer of wall putty on walls to give uniform surface complete all as specified and directed. Note :- (Before applying of wall care putty, complete removing of treatment as directed and approved by Engr-in-charge). |
| 81 | M & L for preparation of complete removal of new decorated surfaces of External walls, applying a coat of exterior water proof wall care putty (average 1mm to 2mm thick), and applying Two or more coats of 100% Premium acrylic emulsion paint on external surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 82 | M & L for preparation of complete removal of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil, greasy spots, applying a coat of exterior water proof wall care putty (average 1mm to 2mm thick), and applying Two or more coats of 100% Premium acrylic emulsion paint on external surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. |
| 83 | S&F vitreous China wash down water closet pan pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete aall as specified and directed by Engineer-in-Charge. |
| 84 | S&F in repair 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engineer-in-Charge. Make CERA/Prayag or equivalent. |
| 85 | Supply only flush pipe of PVC 32 mm dia for low level cistern. all as specified and directed by Engineer-in-Charge. |
| 86 | S&F MS grating 100mm dia fixed to floor trap all as specified and directed by Engineer-in-Charge. |
| 87 | M&L 600 mm long brass chromium plated towel rail fancy type complete all as specified and directed by Engineer-in-Charge. |
| 88 | S&F PVC connection 15mm size with PTMT nuts of lengh 450mm complete all as specified and directed by Engineer-in-Charge. |
| 89 | S&F steel peg set colour coated of six as per sample all as specified and directed by Engineer-in-Charge. |
| 90 | S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm all as specified and directed by Engineer-in-Charge. |
| 91 | S&F plate rack made of stainless steel, 600 x 750X0.55mm including fixing as per manufacturers instruction. all as specified and directed by Engineer-in-Charge. |
| 92 | M&L PCC 1:3 :6 type C2 using 40 mm graded aggregate in surafce channel and drains complete all as specified and directed by Engineer-in-Charge. |
| 93 | M&L PCC 1:5:10 type E2 using 40 mm graded brick aggregate as in filling under sunken floors etc complete all as specified and directed by Engineer-in-Charge. |
| 94 | PVC(SWR Class 'B') pipes 110mm bore single socketed , in any length with rubber ring joints fixed to wall all as specified and directed by Engineer-in-Charge. |
| 95 | PVC (SWR Class 'B') pipes 75mm bore single socketed , in any length with rubber ring joints fixed to wall all as specified and directed by Engineer-in-Charge. |
| 96 | S&F PVC (SWR Class 'B') bend any radius for 75mm bore pipe all as specified and directed by Engineer-in-Charge. |
| 97 | S&F PVC (SWR)Class 'B') bend any radius for 110mm bore pipe all as specified and directed by Engineer-in-Charge. |
| 98 | S&F PVC (SWR) junction single (single T ) equal or unequal for 100mm bore pipe all as specified and directed by Engineer-in-Charge. |
| 99 | S&F PVC (SWR) junction single (single T ) equal or unequal for 75mm bore pipe all as specified and directed by Engineer-in-Charge. |
| 100 | S&F PVC (SWR) reducers for110mm bore pipe all as specified and directed by Engineer-in-Charge. |
| 101 | S&F PVC (SWR)'P' Trap for110mm bore pipe all as specified and directed by Engineer-in-Charge. |
| 102 | S&F Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore pipe.complete all as specified and directed by Engineer-in-Charge. |
| 103 | S&F Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 104 | PVC (SWR) pipes 110mm bore But wall thickness should not be less than 5mm single socketed , in any length with rubber ring joints fixed to wall all as specified and directed by Engineer-in-Charge. |
| 105 | S&F PVC (SWR) bend any radius for 110mm bore pipe all as specified and directed by Engineer-in-Charge. |
| 106 | M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 using 12.5mm graded stone aggregate as chajjas , slabe or similar works etc completed all as specified and directed by Engineer-in-Charge. |
| 107 | M&L 15 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engineer-in-Charge. |
| 108 | M&L 20mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engineer-in-Charge. |
| 109 | M&L Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm as in repair all as specified and directed by Engineer-in-Charge. |
| 110 | M&L Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm as in repair all as specified and directed by Engineer-in-Charge. |
| 111 | S&F in reapair fancy type chromium plated angle valve cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm. all as specified and directed by Engineer-in-Charge. |
| 112 | S&F in repair of Bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore chromium plated. all as specified and directed by Engineer-in-Charge. |
| 113 | S&F in repair Ball Brass Valve high pressure with polythine coat and fly nut complete screwed for Iron pipe or brass ferrule and fixed of size 20mm bore. all as specified and directed by Engineer-in-Charge. |
| 114 | S&F as in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge. |
| 115 | S & F in repairs 15 mm dia WHB mixer centre hole chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 116 | S &F sheet glass shelf assembly/corner consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plate bracket guard and railing 60 cm long in repair all as specified and directed by Engineer-in-Charge. |
| 117 | S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with thread closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified and directed by Engineer-in-Charge. |
| 118 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 119 | S & F in repairs 15 mm dia wall mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 120 | Supply and fix in repairs sink mixer with regular swinging spout (wall mounted model) with connecting legs and wall flanes, 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and directed by Engineer-in-Charge.. Make : Cat No 7355 of Prayag/Jaquar cat No ARI-39309/Cera or equivalent |
| 121 | M&L for Reinforced cement concrete M-25 Design Mix (using 20 mm graded cdrushed stone aggregate) as in slab supported on walls and the like complete all as specified and directed by Engineer-in-Charge. |
| 122 | Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping complete all as specified and directed by Engineer-in-Charge. |
| 123 | M&L for TMT bars 6 to 8 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge. |
| 124 | M&L, Hard core of broken stone or boulders of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled / rammed to a true surface all as specified and directed by Engineer-in-Charge. |
| 125 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) Cement concrete in surface channels and drains beds completed all as specified and directed by Engineer-in-Charge. |
| 126 | M&L for sand cushion 30 to 40 mm thick for laying and fixing interlocking tiles all as specified and directed by Engineer-in-Charge. |
| 127 | M&L for 80mm thick machine pressed / vibro mechanically floated interlocking paver block any shape and size conforming to IS - 15658-2006, M-35 grade, with topping of cement mixed without pigment. Colour and shape shall be approved by Engr-in-charge. (Make: ULTRA/MODERN/RUCHI/ISI Marked). |
| 128 | M&L for cement concrete 1:3:6 type C1 (20mm graded aggregate) as in surface channels and drains including necessary formwork etc all as specified and directed by Engineer-in-Charge. |
| 129 | S&F for 150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed all as specified and directed by Engineer-in-Charge. |
| 130 | M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 131 | Providing Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate ) as in manholes cover slab etc all as specified and directed by Engr-in-charge. |
| 132 | M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge. |
| 133 | M&L for PCC 1:2:4 type B1 (using 20 mm graded aggregate) in surafce channel and drains complete all as specified and directed by Engineer-in-Charge. |
| 134 | Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 40 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. all as specified and directed by Engineer-in-Charge. |
| 135 | Use and waste form work for flat rough finished surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed by Engineer-in-Charge. |
| 136 | M & L for Reinforced Cement Concrete (Design Mix) M-25 (20 mm graded aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, underreamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 137 | Use of formwork square, rectangular or polygonal for rough finished surfaces of concrete to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engineer-in-Charge. |
| 138 | M & L for Reinforced Cement Concrete (Design Mix) M-25 (20 mm graded aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge. |
| 139 | Use and waste form work to sides and soffits of floor or roof beams, beams haunching, girders, bressummers, lintels, cantilevers, shelves including supports, over hangs, etc. also splays between floors and beams etc for flat rough finished surfaces of concrete complete all as specified and directed by Engineer-in-Charge. |
| 140 | M & L for Reinforced Cement Concrete (Design Mix) M-25 (20 mm graded aggregates) as in beams,cantilevers,bressumers,lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge. |
| 141 | M & L mild steel TMT bars 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 142 | M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cm 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 143 | All as per ser item No 144 above but except bricks complete all as specified and directed by Engineer-in-Charge. |
| 144 | M&L for preparing plastered new and undecorated surface of walls, applying chalk whiting on plastered surface preparatory to distempering and distempering walls with two coats of cement base paint white or tinted complete all as specified and directed by Engineer-in-Charge. |
| 145 | M&L 40mm bore Tubes, stainless steel, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed by Engineer-in-Charge.. |
| 146 | S & F Rigid non-metallic PVC conduit (25 mm Dia ) exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc all as specified and directed by Engineer-in-Charge. |
| 147 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specified and directed by Engineer-in-Charge. |
| 148 | Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed by Engineer-in-Charge. |
| 149 | Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed by Engineer-in-Charge. |
| 150 | Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/Metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall / ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white/ colour wash complete all as specified and directed by Engineer-in-Charge. . |
| 151 | All as per Item No.149 But for one light point control by two nos two way switches with other Independent Board with 1.5 sqmm PVC insulated unsheathed FRLSH copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed FRLSH copper conductor as earth lead complete all as specified and directed by Engineer-in-Charge. |
| 152 | All as per item no 149 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on an independent board. |
| 153 | All as per item no 149 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch. |
| 154 | All as per Srl item No 149 but for 3/5 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly. |
| 155 | All as per Srl item No 149 but for 3/5 Pin 16 Amps socket outlet independent board with cable 4 Sq mm including copper PVC insulated PVC unsheathed suitable earth wire standard and connected to earth dolly. |
| 156 | S&F for modular switch 10 Amps single pole two way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge. |
| 157 | S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge |
| 158 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge. |
| 159 | S & F modular Bell push flush type 6 amp 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge. |
| 160 | S&F for modular socket 3/5 Pin 6 Amps flush type 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge. |
| 161 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with inner / outer cover required module complete all as specified and directed by Engr In charge. |
| 162 | S&F electronic step type fan regulator 120 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed by Engineer-in-Charge. |
| 163 | M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge. |
| 164 | S & F calling Bell ding dong 230 volts single pole 50Hz complete all as specified and directed by Engr In charge. |
| 165 | S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 8 way 240 volts with suitable rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engineer-in-Charge. |
| 166 | S & F in replacement MCB Single pole and neutral 240 volt any rating from 40 amps\\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable all as specified and directed by Engineer-in-Charge. |
| 167 | S & F in replacement MCB single pole 240 volt any rating from 6 to 32 amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable all as specified and directed by Engineer-in-Charge. |
| 168 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire all as specified and directed by Engineer-in-Charge. |
| 169 | Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost. |
| 170 | Taking down ceiling fan/Exhaust fans (C/F of any size/make), cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed by Engr-in-Charge.Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account. |
| 171 | S & F Angular Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for light fittings all as specified and directed by Engineer-in-Charge. |
| 172 | Supply and fixing replacement LEDBulb 15W, 230V,AC suitable for Angular Lamp holder complete all as specified and directed by Engineer-in-Charge. |
| 173 | Supply and fixing replacement LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable ( with backup of 3-4 hrs) of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge. |
| 174 | S & F replacement LED light fitting 1X9W/10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize all as specified and directed by Engineer-in-Charge. |
| 175 | Supply and fixing replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 176 | Supply and fixing replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge. |
| 177 | S&F Street light Bracket complete made of GI pipe of suitable size, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall , all as specified and directed by Engg- in Charge. |
| 178 | Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with \\"XLPE\\" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 16 Sqmm x 3 core size all as specified including taking down old cable.Note : Earth work and other connected work shall be measured & paid sperately all as specified and directed by Engineer-in-Charge. |
| 179 | M & L Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and directed by Engineer-in-Charge. Note : for payment purpose punned thickness shall be measured. |
| 180 | M&L Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels all as specified and directed by Engineer-in-Charge. |
| 181 | Supply and fixing in repairs GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed by Engineer-in-Charge. |
| 182 | S&F for modular TV socket outlet single with inner and outer cover strip required module including TV cable required length from roof complete all as specified and directed by Engr In charge. |
| 183 | Removing and refixing water heater 25 ltr capacity 220V,AC single phase including nut bolt, copper conductor cable of suitable size , one coat of synthetic enamel white spray painting complete all as specified and directed by Engineer-in-Charge. |
| 184 | Supply and fix exhaust fan, PVC body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and directed by Engineer-in-Charge. |
| 185 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed by Engineer-in-Charge. |
| 186 | Supply, fixing and testing of meter box board made out of 2mm thick MS sheet of size not less than 800x800x150mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, wall mounted/ semi grouted in wall with locking arrangement and provision of tapping for incoming and outgoing electric connections with suitable size of lugs complete all as specified and directed by Engineer-in-Charge. comprising of the following(Make: LT panel shall be manufactured by one make mentioned in the List of makes under PS) :- (i) Aluminium bus bar chamber of suitable rating (Set of four strip). (ii) Phase indicating lamp Set of three. (iii) MCCB four pole 415 volts AC 50 Hz, 100 amps rating breaking capacity 10 KA fixed magnetic and adjustable thermal release - 01 No. (iv) MCB two pole 415 volts AC 50 Hz, 40 amps rating breaking capacity 10 KA fixed magnetic and adjustable thermal release - 04 No. (v) fixing and connection of existing energy meter - 04 nos(vi) Name slip holder on each compartment for identification of Accn - 04 Nos(vii) Earthing terminals - 02 Nos(viii) MCB SP 20A 10 KA C series - 01 Nos |
| 187 | S&F single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of Make: Legrand/ Havells/ Anchor all as specified and directed by Engineer-in-Charge. |
| 188 | S&F Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engineer-in-Charge. (Note-MCBs will be measured separately) |
| 189 | S & F MCB single pole and neutral 240 volt any rating from 63 Amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable Make:- Havells/ legrand/ Schneider all as specified and directed by Engineer-in-Charge. |
| 190 | S & F MCB single pole 240 volt any rating from 10 to 40 amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable Make:- Havells/ legrand/ Schneider all as specified and directed by Engineer-in-Charge. |
| 191 | Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and directed by Engineer-in-Charge. |
| 192 | Supply and fixing PVC flexible connection graded suitable for hot water, 450mm long (Set of two) for inlet/outlet connections of geysers with heat resistance washers and nuts complete all as specified and directed by Engineer-in-Charge. |
| 193 | Supply and fixing bib cock brass chromium plated screwed down for size 15mm dia GI pipe with chromium plated complete all as specified and directed by Engineer-in-Charge. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender