Tender For Special Repair To Otm Accn Bldg No P-31 Swimming Pool Bldg At Shahjahanpur Cantt Under Ge (East) Bareilly
Tender Value
47.08 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
19 days left
EMD
94200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Otm Accn Bldg No P-31 Swimming Pool Bldg At Shahjahanpur Cantt Under Ge (East) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Taking down of chowkhats or frame exc 1.5 Sqm but n.exc 4.0 Sqm (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkhats or window frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and directed. |
| 3 | S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and including both side decorative laminates 0.90 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 4 | S & F of pressed steel frames for doors 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 5 | M & L for PCC type B-0 1:2:4 as in roof kerbs or mud stops, rounded or chamfered on edges, fixing of hold fasts, and filling of pressed steel frames complete all as specified and directed. |
| 6 | S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note: S&F rates, include for anodised aluminium hard ware as indicated, pvc roller, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames complete all as specified and directed. |
| 7 | M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes.framed guard bars iron doors.ladders framed balusters, walk ways. Railings, frame work of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed. |
| 8 | S & F of 15 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and necessary fittings & fixtures complete all as specified and as directed. |
| 9 | S & F of stainless steel grade 304 glossy finish handle 900 mm long and fixing the same in the toughened glass door including necessary fittings & fixtures complete all as specified and as directed. |
| 10 | S & F of stainless steel grade 304 brackets, 04 nos suitable hinge pin, 01 No floor spring and 01 no suitable SS locking arrangement and fixing the same in the toughened glass door including necessary fittings & fixtures complete all as specified and as directed. |
| 11 | S&F 4 mm thick sheet glass, ordinary quality and glazing with aluminium clips in square/rectangular n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 12 | S&F 5.5mm thick sheet glass, ordinary quality and glazing with with aluminium clips in square/rectangular exc 0.5 Sqm in each pane complete all as specified and directed. |
| 13 | S&F 3mm thick Aluminium Composite Panel board of required size and shape and fixed in aluminium structural framing as approved by Engr-in-charge complete all as specified and directed. |
| 14 | S& F of stainless steel wire clothes 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed. |
| 15 | S&F mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 16 | S&F 300mm long stainless steel grade 304 Sliding door bolts, bolt or clip type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifieed and directed. |
| 17 | M&L for 150mm long stainless steel grade 304, oval type complete all as specified and directed. |
| 18 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge complete all as specified and directed. |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engr-In-Charge complete all as specified and directed. |
| 20 | S&F, 200 mm long stainless steel heavy duty barrel tower bolts and fixed as specified and as directed. |
| 21 | S&F 100 mm long Butt hinges, stainless steel heavy duty (3.00 mm thick) with SS hinge pin, and fixed complete all as specified and directed. |
| 22 | S&F 150 mm stainless steel grade 304 handles D type complete all as specified and as directed. |
| 23 | M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation all as specified and directed. |
| 24 | M&L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying Two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 25 | Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing , steps, cills, sunshade , shelves,lintels, etc and cutting chases for concealed conduit wiring , etc and making good, cutting not exc 20 cm girth all as specified and as directed. |
| 26 | S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floor all as specified and as directed. |
| 27 | S&F curtain rod 25mm dia , stainless steel grade 304, finials and fixing bracket etc for hangging curtain rod complete all as specified and directed. |
| 28 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. |
| 29 | M & L Glazed ceramic coloured swimming pool tiles in vertical surface 200 x 100 x 7 to 8 mm thick set and jointed in tiles admitures and pointed in epoxy grouting with matching colour over and including 10 mm thick factory blended mixture of cement, graded silica sand, and polymers complete all as spd and as directed. |
| 30 | M & L Glazed ceramic coloured swimming pool tiles in floor 200 x 100 x 7 to 8 mm thick set and jointed in tiles admitures and pointed in epoxy grouting with matching colour over and including 15 mm thick factory blended mixture of cement, graded silica sand and polymers complete all as spd and as directed. |
| 31 | M & L Glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement over and including 10 mm thick in CM 1:4 complete all as specified and as directed. |
| 32 | M & L providing non- skid glazed ceramic coloured tiles coloured 7-8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n xc 0.18 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles incl 15 mm thick cement screed bed in CM 1:6 complete all as spd and as directed. |
| 33 | M & L for vitrified double charged tiles light shade 10 mm thick (rectanglar) area of each tiles exc 0.42 sqm but n.exc 0.72 Sqm each in floor etc set and jointed in neat cement slurry over and over and including 15 mm thick screed bed of CM in 1:4 and pointed in white or coloured cement to match coloured tiles complete all as specified as directed. |
| 34 | M & L for vitrified double charged tiles light shade 10 mm thick (rectanglar) area of each tiles exc 0.42 sqm but n.exc 0.72 Sqm each in dado/skirting etc set and jointed in neat cement slurry over and including 10 mm thick cement mortar rendering in 1:4 and pointed in white or coloured cement to match coloured tiles complete all as spd and all as directed. |
| 35 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and complete all as specified and as directed. |
| 36 | M & L for sika top 107 (officially named Sika Top-107 Seal Plus IN in India) is a premium, two-part, acrylic polymer modified cementitious waterproofing coating as per manufacturer instruction complete all as spd and as directed. |
| 37 | Supply, laying and testing of 150 mm inner diameter of double wall corrugated (DWC) high density polethelene pipes(HDPE) and stiffness class-8 (SN-8) with ISI marked (with CML No) with and including all fittings & jointing materials for sewage line and laid in trenches as specified in IS-16098(Part-2):2013 and as per manufacturer's instruction complete all as spd and as directed. Note:- Bedding of pipe shall not be provided in normal condition and construction methods shall be strictly compiled as per clause no A-4 Annex 'A' of IS 16098(Part-2):2013 complete all as specified and directed. |
| 38 | S&F factory made SFRC MH cover with frame confirming to IS 12592:2002 HD 20 grade, of size 750mm circular or 750 x 750 mm rectangular sorrounded with steel strip 50 x 1.5 mm reinforced shall be as per relevant IS and laid over man hole brick work or concrete in CM 1:4, including reinforcement, complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover. (ii) Reinforcement shall not be measured and paid seperately complete all as specified and directed. |
| 39 | M&L for 20mm thick granite stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 20mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 40 | Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc all as specified and directed. |
| 41 | M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement all as specified and directed. |
| 42 | M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement complete all as specified and directed. |
| 43 | M&L rendering 10 mm thick in cement plaster 1:4 on concrete surfaces of ceilling all as specified and directed. |
| 44 | M&L three coat of white wash on walls including preparation of plastered surface and complete all as specified and directed. |
| 45 | M& L for two coat acrylic premium quality emulsion (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over one coat of primer with 2 mm thick wall care wall putty complete on wall/ceiling as per manufacturer's specification complete all as specified and directed. |
| 46 | M & L for finishing two coat of acrylic smooth exterior anti dust paint applied @ 1.67 ltr/10 sqm walls of required shade incl priming coat of exterior primer applied @ 2.20 kg/10 sqm with 2 mm thick wall care as per manufacturer's specification complete all as specified and directed. |
| 47 | M&L for preparing newly plastered surfaces of ceiling and applying three coat of white wash complete all as specfied and directed. |
| 48 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 49 | M&L for machine pressed cement concrete coloured tiles 30cm x 30cm x 30mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 50 | M&L 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone agg) as in plinth protection /Path finishing cement concrete even and smooth without using extra cement all as specified and directed. |
| 51 | M & L for RCC M-30 Design Mix (using 20 mm graded aggrregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and directed. |
| 52 | M & L for RCC M-30 Design Mix (using 20 mm graded aggrregate) as in walls, retaining walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. |
| 53 | Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 54 | Use & waste formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work etc.; circular or curved surfaces of wall vertical or to batter complete all as specified and directed. |
| 55 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 56 | S & F of framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 57 | M&L 25 mm thick plain PCC 1:2:4 type B1 using 20 mm graded aggregate as in roof for maintain the uniform slope etc any thickness all as specified and directed. |
| 58 | M&L for preparation of roof surface applying a coat of hot bituminous primer @ 0.30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane mineral type top (weight not less than 4 kg/sqm, 3mm thick consisting 100 mm micron HMHDE film ) over 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% as per manufacturer instruction and complete all as specified and directed |
| 59 | Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for all as specified and direcetd. |
| 60 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 61 | M&L for cement concrete (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed. |
| 62 | M&L PCC 25mm thick 1:2:4 of type B0 ( using 12.5mm graded stone aggregate) as in base of floors cover fillet/beads of with wpc @ 3% all as specified and directed. |
| 63 | S&F in repairs concealed stop cock Stop valves, cast copper alloy, screwed down, high pressure, chromium plated fancy type long body with crutch or butter fly handle quarter turn screwed both ends for iron pipe and fixed 15mm bore complete all as specified and direcetd. |
| 64 | S& in repair vitreous china squatting pan \\"Orissa\\" pattern size 580mmx 440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified and directed. |
| 65 | S&F in repair vitreous china wall hung reamless type EWC size 380 × 515 × 360 mm white with soft closiing seat cover and including concealed cistern & cover plate and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor/wall complete all as specified and as directed. |
| 66 | S&F in repair plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and directed. |
| 67 | S&F in repair, Health faucet (ABS Body) mild steel chromium plated for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as spd. |
| 68 | S & F in repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed. |
| 69 | S&F in repair vitreous china wash basin white, oval type size 550 mm excluding tap waste but including brackets and including cutting for and pinining ends of brackets, waste pipe and fixed in RCC slab or shelves all as specified and directed |
| 70 | S&F in repair only 32mm dia waste fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.complete all as specified and directed. |
| 71 | S&F repair 15mm bore pillar tap fancy type long body cast copper allloy with capstan head chromium plated scwed down with or without letter hot or cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed. |
| 72 | S&F in repairs bib taps 15mm bore chromium plated fancy type long body with crutch or butter fly handle quarter turn screwed down for iron pipe or brass ferrule and fixed complete all as specified and direcetd. |
| 73 | S&F in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as spd and as directed. |
| 74 | S&F in repair Vitreous China Urinal, Half Stall type(back or corner wall type) complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brakctes flush pipe grating and union for discharge pipe complete all as specified and directed. |
| 75 | S&F vitreous china urinal partition white of size 310X700mm complete all as specified and direcetd. |
| 76 | S&F, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and direcetd. |
| 77 | S&F 450mmx 600mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer all as specified and direceted. |
| 78 | S&F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified. |
| 79 | S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement all as specified and direceted. |
| 80 | S&F in repair swivel shower rose dia 125 mm of brass chromium plated for fixing with 15mm pipe fixed all as specified and directed. |
| 81 | Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store complete all as specified and directed. |
| 82 | S&F rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position triple layer in white colour all as pacific SSR Part- I, including metalic cover (GI basin as cover) complete all as specified and directed. |
| 83 | S&F 25 mm bore CPVC gate valves for CPVC pipe all as specified and directed. |
| 84 | S&F 20 mm bore Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule all as specified and directed. |
| 85 | Taking up or down existing steel tubing and connections incl cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore all as specified and directed. |
| 86 | Taking up or down existing steel tubing and connections incl cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore all as specified and directed. |
| 87 | S & F 20mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with solvent and testing for leakage complete all as specified |
| 88 | S & F 25mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with solvent and testing for leakage complete all as specified |
| 89 | S & F 15mm bore female brass threaded Adaptor (FTA/ FBTA) on walls/ceiling or laying in floors complete all as specified |
| 90 | Taking up or down existing asbestos cement pressure pipe any class, (including all fitting) including disconnecting pipes 75/110 and fittings complete all as specified and directed. |
| 91 | S&F in repair 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints and solvent cement complete fixed to wall with clamp all as specified and directed. |
| 92 | S&F 75 mm bore PVC (SWR) bends all as specified and directed. |
| 93 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all as specified and directed. |
| 94 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed. |
| 95 | S&F 110 mm PVC (SWR) bend any radius all as specified and directed. |
| 96 | S&F 110mm dia PVC (SWR) junction single (Single T) equal or unequal with access door all as specified and directed. |
| 97 | S&F stack clamps out of 20mm x 3mm flat iron for fixing of PVC pipe 75 mm/100 mm dia including securing ends of stays to ball or roof all as specified and directed. |
| 98 | Dismantling of existing CI drainage pipe or water pipe line and refixing the same after cleaning and painting complete and testing complete all as specified and directed. |
| 99 | Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, and precast concrete articles etc complete all as specified and directed. |
| 100 | M & L brick work with fly ash bricks (old size) straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 101 | M & L brick work with sub class B bricks (except bricks) straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 102 | M & L brick work with fly ash bricks (old size) straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and as directed. |
| 103 | M & L for applying single coat of epoxy bond adhesive on prepared non metallic surface (existing surface) by using brush as per manufacturers instruction / specification upto any height incl necessary scaffolding and safety measures complete all as specified and as directed. |
| 104 | Supply and application free flow non-shrink cementitious micro concerete to the affected beam, column etc. above 45 mm but upto 60mm thickness (average) where major spalling has taken place even the core of concrete affected. The Micro concrete shall have a minimum 1 day compressive strength of 10 MPa and 28 days strength of 50 MPa, Minimum tensile strenght 2 N/mm2 @ 28 days, minimum Flexural strength 5 N/mm2@ 28 days tested as per BS 4551-80, Expansion characterstics Unrestrained expansion as per ASTM C827-1987 1 to 4% including necessary formwork, upto any height incl necessary scaffolding and safety measures complete all as spd and as directed by the Engr-in-Charge. |
| 105 | Taking down carefully of point wiring (Light , fan, socket or power) complete (fittings such as switches, Ceiling roses, pendants, regulator, sockets etc to be measured separately) removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed |
| 106 | Taking down carefully old unserviceable fittings & Fixers of any type and any size complete all as specified and directed. |
| 107 | Taking down carefully old unserviceable by unscrewing from DB box, MCB SP/SPN/TPN of any size & any capacity complete all as specified and directed. |
| 108 | Taking down carefully old unserviceable sub main wiring of any size complete all as specified and directed. Please Enable Macros to View BoQ information |
| 109 | Taking down carefully old unserviceable sub main wiring of any size complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender