Tender For Providing Of Cretain Minor Wrks At Bldg No 217 And E-37 Of 505 Su
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Oct 2026
0 days left
EMD
16200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Cretain Minor Wrks At Bldg No 217 And E-37 Of 505 Su
BOQ
| Sl. No. | Item Description |
| 1 | Cutting openings, through brick walls for door, window and other openings orenlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplusserviceable bricks, hard-core,etc.. to store and rubbish not exc. 50mtr |
| 2 | Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, in CM 1 : 6 complete all as specd and directed by Engr In Chgarge. |
| 3 | Making good under cills or over arches, lintels and bres summers. including all pinning when necessary in CM 1 : 6 complete all as specd and directed by Engr In Chgarge. |
| 4 | Excavation in trenches not exc 1.5m wide & not exc. 1.5 in depth in soft/loose soil for foundation laying cable etc exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft loose soil complete all as specified and directed |
| 5 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm in trenches, under floor complete all as specified & directed |
| 6 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 7 | M&L PCC (1:4:8)type E-2 (using 40mm graded stone aggregates) foundation fillings and mass concrete complete all as specified and directed. |
| 8 | M&L Brick work with sub class 'B\\" bricks, straight or curved on plan exc 6 mtrs mean radius and built in cement mortar 1:4 all as specified. |
| 9 | M&L for Form work to fair finished surface of sides of concrete foundation, footings, bases of columns, raft and raft beams, roof beams,lintel beam, slabs & sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 10 | M&L RCC 1:2:4 type B1 nominal mix ( 20mm graded stone aggragate) for plinth beams, lintel beam, RCC slabs, cantilevers, bressummers, chajjas etc complete all as specified and directed. |
| 11 | M&L for mild deformed TMT steel bars 10mm dia and over, cut to lenght, bent to hsape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed |
| 12 | Ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders |
| 13 | S&F, Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 14 | S&F, 410 Gde E Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 15 | S&F Powder coated (minimum thickness of powder coating 50 micron) of approved colour sliding type aluminium window, three track (two glazed shutter and one gauzed shutter) with frame including aluminium grill, 5mm thick tined glass and moisquito net complete all as specified and directed (a) Frame section 91.85x31.75x1.3mm section No 8758 for top & sides rails and section 91.85x31.75x1.2mm section No 8687 for bottom rails (b) Shutters of section 40x18x1.5mm section No 8820 for top & bottom and sides rails (c) Glass 5mm thick one side reflective and other side visible fixed with rubber gasket and aluminium clips beading section No 4407, aluminium handles, tower bolt etc as directed (d) Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperature 1.40mm fixed with aluminum frame (e) Filling of gap between wall and aluminium frame with silicon putty to make it properly water tight (f) Locking arrangement and providing Namda rope to make the frames air tight. |
| 16 | Demolition of cement concrete of ground floors and Paving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed . |
| 17 | M&L Cement concrete 100 mm th 1:4:8 type D2 (using 40mm graded aggregate) as in sub base of floor etc complete all as specified and directed |
| 18 | M & L for Cement concrete type B-1,40 mm thick 1:2:4 (40 mm graded aggregate) complete all as specified and directed finished even & smooth without using extra cement. |
| 19 | S&F,38 mm wide 3 mm thick Glass dividing strips,and complete all as specified by Engr In Charge. |
| 20 | M&L for 15mm thick rendering in CM 1:4 with with water proofing compound on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.(Note- WPC Qty should be measured and paid to separately.) |
| 21 | Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces without using extra cement complete all as specified and directed. |
| 22 | M&L for preparation of newly plastered internal wall surfaces and applying two coats of oil bound distemper over a coat of 1 mm thick Birla wall care putty complete all as specified and directed. |
| 23 | Supply only water proofing compound complete all as specified and directed. |
| 24 | M&L for preparation of new plastered external wall surfaces l and applying two coats of exterior emulsion paint white or tint on walls/ chajja/ facias/ fins complete all as specified and directed. |
| 25 | M&L preperation of old decorated surface of internal wall and applying two coats of oil bound distemper over a coat of 1 mm thick Birla wall care putty complete all as specified and directed. |
| 26 | M&L for applying two coats of exterior emulsion paint white or tint on walls/ chajja/ facias/ fins on old surfaces including complete removal of existing treatment complete all as specified and directed |
| 27 | M&L, Hardcore of gauge n exc. 63 mm,broken stone or boulder deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 28 | Material & labour for 75 mm thick PCC 1:3:6 type C-1 (using 40mm graded stone aggregate) as in plinth protection/Path paving surface finished even and smooth without using extra cement complete all as specified and directed . |
| 29 | S & F steel work in tabular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 for vertical and raft/purlin drilled for fixing of steel sheeting or other covering etc. including cutting,welding,bending, complete all as specified and directed by Engr-in-charge. |
| 30 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 31 | Preparation of new steel surfaces and applying one coat of sythetic enamel over coat of red oxide 10 cm widith or girth complete all as specified and directed. |
| 32 | S&F Bands, straps, supports or stays for rainwater; ventilating pipes, including bolts , if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; holdfasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290. Gde E-165. qty to be executed at 10 mtr height complete all as specd and directed. |
| 33 | S&F 0.80mm thick plain galvanised, mild steel sheeting, in ridges, hips vally gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275. |
| 34 | S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints fixed to walls. |
| 35 | S&F PVC (SWR) bends any radius 110 mm dia. |
| 36 | Surface excavation in soft/loose soil n. exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed |
| 37 | M&L Sand filling under floors or in foundations including wateringand consolidation |
| 38 | M&L,Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment. |
| 39 | M&L for PCC 1:2:4 Type B1-(using 20 mm graded stone aggregate) as in rounded chamfered on edges ,mud stop etc.complete all as specified and directed. |
| 40 | M&L PCC type C-1,1:3:6 (20mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed. |
| 41 | M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and as directed. |
| 42 | M&L PCC type B-1,1:2:4 (20mm graded stone aggregate) as in coping, side kerbs, mud stops etc including necessary formwork complete all as specified and directed. |
| 43 | Removing excavated material to a distance exc 1.5KM n exc 5 km where directed. |
| 44 | M&L for RCC 1:2:4 nominal mix (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 45 | M&L for form work to to fair finished surface of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender