Tender For Establishment Of Creche Facility To Female Employees At Nmug To Oc Mine Under New Majri Sub Area Of Majri Area / Ma9511cive018-26-27/341 Dated 10.10.2026 / Sr. No.02.
Tender Value
17.98 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
10 days left
EMD
22500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Establishment Of Creche Facility To Female Employees At Nmug To Oc Mine Under New Majri Sub Area Of Majri Area / Ma9511cive018-26-27/341 Dated 10.10.2026 / Sr. No.02.
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR CIL Hide Select GST Registered Bidder under regular scheme GST Registered Bidder under composition scheme GST Unregistered Bidder Not Applicable Tender Inviting Authority: Staff Officer (Civil), WCL, Majri Area. Name of the Work / Contract No: Establishment of creche facility to female employees at NMUG to OC Mine under New Majri Sub Area of Majri Area / ma9511cive018-26-27/341 Dated 10.10.2026 / Sr. No.02. . Category of services (To be selected by department) Category of bidder (To be selected by bidder) To be entered by department Service Tax Category ( To Be Selected by Bidder) ITC Not Available Works Contract Bidder's status (mandatory) Rate of GST (in %) Total GST(in Rs.) GST to be paid by bidder (in Rs.) GST to be paid by WCL (in Rs.) Name of the Bidder/ Bidding Firm / Company : Select 18.0 0.0 0.0 0.0 PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the bidder name and values only.) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total amount inRs. P TOTAL AMOUNT With Taxes Total amount in words |
| 2 | CIVIL WORKS PORTION :- |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift |
| 7 | CARRIAGE OF EARTH UNLOADING AND LOADING AS PER DIRECTION OF ENG-IN-CHRAGE.LEAD UP TO 1KM |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 10 | Reinforced cement concrete work in beams, suspended foors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and StrutsLintels, beams, plinth beams, girders, bressumers and cantilevers |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 16 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand) |
| 17 | Brick work with common burnt clay machine mouldedperforated bricks of class designation 12.5 conforming to IS:2222 in superstructure above plinth level up to floor fivelevel in cement mortar 1:6 (1 cement : 6 coarse sand) :With Modular bricks |
| 18 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 19 | Providing and laying Vitrified tiles in floor in different sizes(thickness to be specified by the manufacturer) withwater absorption less than 0.08% and conforming toIS:15622, of approved brand & manufacturer, in allcolours and shade, laid on 20 mm thick cement mortar 1:4(1 cement: 4 coarse sand) jointing with grey cement [email protected] kg/sqm including grouting the joints with whitecement and matching pigments etc. The tiles must be cutwith the zero chipping diamond cutter only . Laying of tileswill be done with the notch trowel, plier, wedge, clips ofrequired thickness, leveling system and rubber mallet forplacing the tiles gently and easilyDouble charge vitrified tile polished finish of size Size of Tile 600 x 600 mm |
| 20 | Providing and laying Ceramic glazed floor tiles of size300x300 mm (thickness to be specified by themanufacturer), of 1st quality conforming to IS : 15622, ofapproved make, in all colours, shades, except White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed ofcement mortar 1:4 (1 Cement : 4 Coarse sand), jointingwith grey cement slurry @ 3.3 kg/ sq.m including pointingthe joints with white cement and matching pigments etc., complete. |
| 21 | Providing and fixing false celling at all height polyvinyl chloride (PVC) strong , factory manufactured , lightweight plastic material ,PVC ceiling panel in various shapes, desgins colours and length with hollow core, shiny ,smooth exterior, high durability , water proof, detachable, termite proof and fire retardent colour coated in various colour thickness of 7mm-9mm size 1ftx10 ft and 1ft x 12 ft to be laid in true horizontal level suspended with G.I. Channel of 40x25 mm, gypsum crwe prond,Lpatti PVC, Uangle complete with labour cost, transportation all including as per Eng-in-Chrage. |
| 22 | Providing and fixing M.S. grills of required pattern inframes of windows etc. with M.S. flats, square or roundbars etc. including priming coat with approved steelprimer all complete.Fixed to steel windows by welding |
| 23 | Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron |
| 24 | Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flushdoor shutter of required size comprising of virgin polymerof K value 58-60 (Suspension Grade), calcium carbonateand natural fibers (wood powder/ rice husk/wheat husk)and non toxic additives (maximum toxicity index of 12 for100 gms) having minimum density of 650 kg/cum andscrew withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/ mm2, modulus ofelasticity 850 N/mm2 and resistance to spread of flame ofClass A category with property of being termite/ borerproof, water/moisture proof and fire retardant. WPC to belaminated with PVC foil of minimum 14 microns thick ofapproved design pasted with hot melt adhesive on bothfaces of shutter and fixing with stainless steel butt hinges ofrequired size with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S.Sscrews shall be paid separately)35 mm thick |
| 25 | Providing and fixing factory made single extruded WPC(Wood Polymer Composite) soliddoor/window/Clerestory Yvindows & otherFrames/Chowkhat comprising of virgin PVC polymer of Kvalue 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) andnon toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVCsolvent cement and screwed with full body threaded starheaded SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200 N (Face) &1100 N (Edge), minimum compressive strength of 58N/mm2, modulus of elasticity 900 N/mm2 andresistance to spread of flame of Class A category withproperty of being termite/borer proof, water/moistureproof and fire retardant and fixed in position with M.Shold fast/lugs/SS dash fasteners of required dia and lengthcomplete as per direction of Engineer-In- Charge. (M.S holdfast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mmtolerance in dimensions i.e depth and width of profile shallbe acceptable. Variation in profile dimensions on plus sideshall be acceptable but no extra payment on this accountshall be made.Frame size 50 x 100 mm |
| 26 | Providing and fixing factory made panel PVC doorshutter consisting of frame made out of M.S. tubes of 19gauge thickness and size of 19 mm x 19 mm for stylesand 15x15 mm for top & bottom rails. M.S. frame shallhave a coat of steel primers of approved make andmanufacture. M.S. frame covered with 5 mm thick heatmoulded PVC 'C' channel of size 30 mm thickness, 70mm width out of which 50 mm shall be flat and 20 mmshall be tapered in 45 degree angle on both side formingstyles and 5 mm thick, 95 mm wide PVC sheet out ofwhich 75mm shall be flat and 20 mm shall be tapered in45 degree on the inner side to form top and bottom railand 115 mm wide PVC sheet out of which 75 mm shallbe flat and 20 mm shall be tapered on both sides toform lock rail. Top, bottom and lock rails shall beprovided both side of the panel. 10 mm (5 mm x 2 )thick, 20 mm wide cross PVC sheet be provided as gapinsert for top rail & bottom rail, paneling of 5 mm thickboth side PVC sheet to be fitted in the M.S. framewelded/ sealed to the styles & rails with 7 mm (5 mm+2mm) thick x 15 mm wide PVC sheet beading on innerside, and joined together with solvent cement adhesive.An additional 5 mm thick PVC strip of 20 mm width is tobe stuck on the interior sideof the 'C' Channel using PVCsolvent adhesive etc. complete as per direction ofEngineer-in-charge, manufacturer's specification &drawing.30 mm thick pre laminated PVC door shutters |
| 27 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 28 | Finishing with Deluxe Multi surface paint system forinteriors and exteriors using Primer as per manufacturersspecifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm overand including one coat of Special primer applied @ 0.75 ltr/10 sqm |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 30 | Making plinth protection 50mm thick of cement concrete1:3:6 (1 cement : 3 coarse sand (zone-III) derived fromnatural sources : 6 graded stone aggregate 20 mm nominalsize derived from natural sources) over 75mm thick bed ofdry brick ballast 40 mm nominal size, well rammed andconsolidated and grouted with fine sand, includingnecessary excavation, levelling & dressing & finishing thetop smooth. |
| 31 | Providing and laying gang saw cut 18 mm thick, mirrorpolished premoulded and pre polished machine cut granitestone of required size and shape of approved shade, colourand texture in footpath, flooring cut granite stone ofrequired size and shape of approved shade,colour andtexture in footpath, flooring in road side plazas and similarlocations, laid over 20mm thick base of cement mortar 1:4(1cement: 4 coarse sand) including grouting the joints withwhite cement mixed with matching pigment, epoxy touchups etc. complete as per direction of Engineer-in-Charge.With granite stone of area less than 0.50 sqm. |
| 32 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm |
| 33 | SANITARY FITTING WORKS :- |
| 34 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 35 | Providing and fixingketch pvc bib cock 2 in 1 water tap two way faucet bib tap as requirement of Eng -in-chrage. |
| 36 | Providing and fixing Ruhe Miga ABS Health faucet / handheld jet srpay with 1.5 mtr pvc hose pipe as requirement of Eng -in-chrage. |
| 37 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 38 | Providing and fixing wash basin with C.I. brackets, 15 mmC.P. brass pillar taps, 32 mm C.P. brass waste of standardpattern, including painting of fittings and brackets, cuttingand making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with apair of 15 mm C.P. brass pillar taps |
| 39 | Providing and fixing mirror of superior glass (of approvedquality) and of required shape and size with plasticmoulded frame of approved make and shade with 6 mmthick hard board backing :Rectangular shape 1500x450 mm |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall15 mm nominal dia Pipes |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, Including all CPVC plain & brass threaded fittings, includingfixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes & fittings with one step CPVC solventcement and testing of joints complete as per direction ofEngineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes |
| 42 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank, IS : 12701 marked, withcover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes butwithout fittings and the base support for tank |
| 43 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore |
| 44 | Providing and fixing brass stop cock of approved quality :20 mm nominal bore |
| 45 | Providing and supplying in standard lengths ISImark rigid unplasticised PVC pipes suitablefor potable water with solvent cement jointsincluding cost of couplers, as per ISspecification no. 4985 / 1988 excluding GSTlevied by GOI and GOM in all respect, includingtransportation, freight charges, inspectioncharges, loading, unloading, conveyance to thedepartmental stores and stacking the same inclosed shed duly protected from sun rays andrains including cost of jointing material i.e.solvent cement, etc. complete (selffit type to bejointed with cement solvent).: 1) 10% of cost of pipes shall be consideredfor cost of PVC specials for estimatepurpose only 2) One coupler and required cement solventshall be provided with each full length pipecost of which is included in rates below.Working Pressure 4 Kg./Sq.cm75 mm. |
| 46 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 47 | Constructing soak pit 1.20x1.20x1.70 m filled withbrickbats including S.W. drain pipe 100 mm diameter and1.20 m long complete as per standard design. |
| 48 | Providingandfixinghumepipeseptictank900mmdiameterwithventpipeandcapincludingnecessary (including excavation and laying) |
| 49 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:White glazed fire clay kitchen sink of size 600x450x 250 mm |
| 50 | ELECTRICAL WORKS PORTION :- |
| 51 | 2-9-3 Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF. |
| 52 | 1-2-8 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32mm with accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 53 | 1-6-51 Supplying and erecting PVC Surface modular double mounting plate 8 module complete. |
| 54 | 1-3-6 Supplying & erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other placesas per specification no. WG-MA/BW |
| 55 | 1-7-16 Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch,earthing and required accessories asper specification no. WG-PW/SW |
| 56 | 1-7-17 Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm FRLSH grade copper wire, flush type switch,earthing and requiredaccessories as per specification no. WG-PW/SW |
| 57 | 1-6-1 Supplying and erecting modular type switch 6A/10A on provided plate and box with wiring connections complete. |
| 58 | 1-6-11 Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete. |
| 59 | 5-6-14 Supplying, fixing and commissioning 4 pole RCBO 63A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as perspecification no SW-RCBO. |
| 60 | 1-7-3 Point wiring for light/fan/bell in 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification no. WG-PW/SW |
| 61 | 1-6-45 Supplying and erecting 16 to 32A, 10kA, DPMCB suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected. |
| 62 | 1-6-43 Supplying and erecting 16/20/25A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected. |
| 63 | Total impact of GST for the purpose of CTC Total in Figures 1524159.7970999994 1524159.7970999994 INR Fifteen Lakh Twenty Four Thousand One Hundred & Fifty Nine and Paise Eighty Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender