Tender For Supplying And Fixing Of Water Supply Fittings And Misc Pipe Repairing Work For Residential Buildings, Service Buildings And Welfare Buildings Under New Majri Sub Area Of Majri Area / Ma9511cive018-26-27/341 Dated 10.10.2026 / Sr. No.03.
Tender Value
14.79 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
10 days left
EMD
18500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandrapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supplying And Fixing Of Water Supply Fittings And Misc Pipe Repairing Work For Residential Buildings, Service Buildings And Welfare Buildings Under New Majri Sub Area Of Majri Area / Ma9511cive018-26-27/341 Dated 10.10.2026 / Sr. No.03.
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR CIL Hide Select GST Registered Bidder under regular scheme GST Registered Bidder under composition scheme GST Unregistered Bidder Not Applicable Tender Inviting Authority: Staff Officer (Civil), WCL, Majri Area. Name of the Work / Contract No: Supplying and fixing of water supply fittings and misc pipe repairing work for residential buildings, service buildings and welfare buildings under New Majri Sub Area of Majri Area / ma9511cive018-26-27/341 Dated 10.10.2026 / Sr. No.03. . Category of services (To be selected by department) Category of bidder (To be selected by bidder) To be entered by department Service Tax Category ( To Be Selected by Bidder) ITC Not Available Works Contract Bidder's status (mandatory) Rate of GST (in %) Total GST(in Rs.) GST to be paid by bidder (in Rs.) GST to be paid by WCL (in Rs.) Name of the Bidder/ Bidding Firm / Company : Select 18.0 0.0 0.0 0.0 PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the bidder name and values only.) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Total amount inRs. P TOTAL AMOUNT With Taxes Total amount in words |
| 2 | RESIDENTIAL BUILDINGS :- |
| 3 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 4 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore |
| 5 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 6 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore |
| 7 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 8 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 9 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap |
| 10 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia |
| 11 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 12 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 13 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore |
| 14 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 50 mm dia nominal bore |
| 17 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 litre capacity - White |
| 18 | Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete : White solid plastic seat with lid |
| 19 | Supplying C.I. sluice valve ( with cap) complete with nuts, bolts, rubber insertions etc. ( the tail piece if required will be paid seprately): 50 mm diameter Class I. as per direction of Engg-in-charge |
| 20 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter Class I |
| 21 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class I |
| 22 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :200 mm diameter Class I |
| 23 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore |
| 24 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore |
| 25 | Supplying of water supply fitting of ISI mark ( GI Socket) 15mm dia. As and when required as per direction of Engg-in-charge |
| 26 | Supplying of water supply fitting of ISI mark ( GI Socket) 20mm dia. As and when required as per direction of Engg-in-charge |
| 27 | Supplying of water supply fitting of ISI mark ( GI Socket) 25mm dia. As and when required as per direction of Engg-in-charge |
| 28 | Supplying of water supply fitting of ISI mark ( GI Socket) 50mm dia. As and when required as per direction of Engg-in-charge |
| 29 | Supplying of water supply fitting of ISI mark ( GI Socket) 80mm dia. As and when required as per direction of Engg-in-charge |
| 30 | Supplying of water supply fitting of ISI mark ( GI Elbow) 15mm dia. As and when required as per direction of Engg-in-charge |
| 31 | Supplying of water supply fitting of ISI mark ( GI Elbow) 20mm dia. As and when required as per direction of Engg-in-charge |
| 32 | Supplying of water supply fitting of ISI mark ( GI Elbow) 25mm dia. As and when required as per direction of Engg-in-charge |
| 33 | Supplying of water supply fitting of ISI mark ( GI Elbow) 50mm dia. As and when required as per direction of Engg-in-charge |
| 34 | Supplying of water supply fitting of ISI mark ( GI Elbow) 80mm dia. As and when required as per direction of Engg-in-charge |
| 35 | Supplying of water supply fitting of ISI mark ( GI Tee) 15mm dia. As and when required as per direction of Engg-in-charge |
| 36 | Supplying of water supply fitting of ISI mark ( GI Tee) 20mm dia. As and when required as per direction of Engg-in-charge |
| 37 | Supplying of water supply fitting of ISI mark ( GI Tee) 25mm dia. As and when required as per direction of Engg-in-charge |
| 38 | Supplying of water supply fitting of ISI mark ( GI reducing Tee 25mm X 15mm dia.) As and when required as per direction of Engg-in-charge |
| 39 | Supplying of water supply fitting of ISI mark ( GI reducing Elbow 25mm X 15mm dia.) As and when required as per direction of Engg-in-charge |
| 40 | Supplying of water supply fitting of ISI mark ( GI reducing Elbow 25mm X 20mm dia.) As and when required as per direction of Engg-in-charge |
| 41 | Supplying of water supply fitting of ISI mark ( GI reducing Elbow 20mm X 15mm dia.) As and when required as per direction of Engg-in-charge |
| 42 | Supplying of water supply fitting of ISI mark ( GI reducing Socket 25mm X 15mm dia.) As and when required as per direction of Engg-in-charge |
| 43 | Supplying of water supply fitting of ISI mark ( GI reducing socket 25mm X 20mm dia.) As and when required as per direction of Engg-in-charge |
| 44 | Supplying of water supply fitting of ISI mark ( GI reducing socket 20mm X 15mm dia.) As and when required as per direction of Engg-in-charge |
| 45 | Supplying of water supply fitting of ISI mark ( GI reducing Socket 50mm X 25mm dia.) As and when required as per direction of Engg-in-charge |
| 46 | Supplying of water supply fittings of ISI specification ( GI Nipple) 15mm dia. X 50mm length As and when required as per direction of Engg-in-charge |
| 47 | Supplying of water supply fittings of ISI specification ( GI Nipple) 15mm dia. X 100mm length As and when required as per direction of Engg-in-charge |
| 48 | Supplying of water supply fittings of ISI specification ( GI Nipple) 15mm dia. X 150mm length As and when required as per direction of Engg-in-charge |
| 49 | Supplying of water supply fittings of ISI specification ( GI Nipple) 20mm dia. X 50mm length As and when required as per direction of Engg-in-charge |
| 50 | Supplying of water supply fittings of ISI specification ( GI Nipple) 20mm dia. X 100mm length As and when required as per direction of Engg-in-charge |
| 51 | Supplying of water supply fittings of ISI specification ( GI Nipple) 20mm dia. X 150mm length As and when requiredas per direction of Engg-in-charge |
| 52 | Supplying of water supply fittings of ISI specification ( GI Nipple) 25mm dia. X 50mm length As and when required as per direction of Engg-in-charge |
| 53 | Supplying of water supply fittings of ISI specification ( GI Nipple) 25mm dia. X 100mm length As and when required as per direction of Engg-in-charge |
| 54 | Supplying of water supply fittings of ISI specification ( GI Nipple) 25mm dia. X 150mm length As and when required as per direction of Engg-in-charge |
| 55 | Supplying of water supply fitting of ISI mark ( GI Union) 15mm dia. As and when required as per direction of Engg-in-charge |
| 56 | Supplying of water supply fitting of ISI mark ( GI Union) 20mm dia. As and when required as per direction of Engg-in-charge |
| 57 | Supplying of water supply fitting of ISI mark ( GI Union) 25mm dia. As and when required as per direction of Engg-in-charge |
| 58 | Supplying of water supply fitting of ISI mark ( GI flange) 50mm dia. As and when required as per direction of Engg-in-charge |
| 59 | Supplying of water supply fitting of ISI mark ( GI flange) 80mm dia. As and when required as per direction of Engg-in-charge |
| 60 | Supplying of water supply fitting of ISI mark ( GI flange) 100mm dia. As and when required as per direction of Engg-in-charge |
| 61 | Supplying of water supply fitting of ISI mark ( GI flange) 150mm dia. As and when required as per direction of Engg-in-charge |
| 62 | Supplying of water supply fitting of ISI mark ( PVC olstarn bend of 40mm dia. 750mm long) As and when required as per direction of Engg-in-charge |
| 63 | Supplying of water supply fitting of ISI mark ( CP brass pillar cock of approved make 15mm dia.) As and when required as per direction of Engg-in-charge |
| 64 | Supplying of rubber packing for flange (5mm thick.) as per direction of Engg-in-charge |
| 65 | Supplying of 20mm bibcock brass jumper washer ( 1 packet containing 100 nos) as per direction of Engg-in-charge |
| 66 | Supplying of PVC pillercock washer ( 1 packet containing 100 nos) as per direction of Engg-in-charge |
| 67 | Supplying of PVC bibcock washer ( 1 packet containing 100 nos) as per direction of Engg-in-charge |
| 68 | Supplying of PVC bibcock washer for flexible connecting pipe ( 1 packet containing 100 nos) as per direction of Engg-in-charge |
| 69 | Supplying of water tank connector of 25mm dia. as per direction of Engg-in-charge |
| 70 | Supplying of brass waste coupling for wash basin 32mm dia. as per direction of Engg-in-charge |
| 71 | Supplying of brass waste coupling for wash basin 65mm dia. as per direction of Engg-in-charge |
| 72 | Supplying of plug 15mm dia. as per direction of Engg-in-charge |
| 73 | Supplying of plug 20mm dia. as per direction of Engg-in-charge |
| 74 | Supplying of plug 25mm dia. as per direction of Engg-in-charge |
| 75 | Supplying of gland packing rope of dia. 12mm as per direction of Engg-in-charge |
| 76 | Supplying of gland packing rope of dia. 10mm as per direction of Engg-in-charge |
| 77 | Supplying of gland packing rope of dia. 15mm as per direction of Engg-in-charge |
| 78 | Supplying of gland packing rope of dia. 8mm as per direction of Engg-in-charge |
| 79 | Supplying of Cl sluice valve of ISI mark of 80mm dia. as per direction of Engg-in-charge |
| 80 | Supplying of hacksaw blade (100mm) as per direction of Engg-in-charge |
| 81 | Supplying of nuts and bolts (Size 5/8\\"X3\\") full thread as per direction of Engg-in-charge |
| 82 | Supplying of nuts and bolts (Size 1/2\\"X3\\") full thread as per direction of Engg-in-charge |
| 83 | Supplying of mechanical joint for 100mm dia of pipe as per direction of Engg-in-charge |
| 84 | Supplying of mechanical joint for 150mm dia of pipe as per direction of Engg-in-charge |
| 85 | Supplying of mechanical joint for 200mm dia of pipe as per direction of Engg-in-charge |
| 86 | Supplying of cutting blad for cutter as per direction of Engg-in-charge |
| 87 | Supplying of M-seal as per direction of Engg-in-charge |
| 88 | Supplying of 15mm gum metal gate valve as per direction of Engg-in-charge |
| 89 | Supplying of 20mm gum metal gate valve as per direction of Engg-in-charge |
| 90 | Supplying of PVC tank cover of approved quality as per direction of Engg-in-charge |
| 91 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes butwithout fittings and the base support for tank. |
| 92 | Supplying of sluice valve spindle with check nut for operating valve as per sample given including cost of materials and labour all complete for 150 mm dia. Sluice valve 450 mm in lenght etc. Complete as per direction of Engg-in-charge |
| 93 | Supplying of sluice valve spindle with check nut for operating valve as per sample given including cost of materials and labour all complete for 200 mm dia. Sluice valve 450 mm in lenght etc. Complete as per direction of Engg-in-charge |
| 94 | Supplying of sluice valve spindle with check nut for operating valve as per sample given including cost of materials and labour all complete for 100 mm dia. Sluice valve etc. Complete as per direction of Engg-in-charge |
| 95 | Supplying of sluice valve spindle with check nut for operating valve as per sample given including cost of materials and labour all complete for 80 mm dia. Sluice valve etc. Complete as per direction of Engg-in-charge |
| 96 | Providing and fixing 15 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. As per directed of Engg-in-Charge |
| 97 | Providing and fixing 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. As per directed of Engg-in-Charge |
| 98 | Providing and fixing 20 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. As per directed of Engg-in-Charge |
| 99 | Providing and fixing water supply fitting of ISI mark ( uPVC BALL Valve) 15 mm. As and when required as per direction of Engg-in-charge |
| 100 | Providing and fixing water supply fitting of ISI mark ( uPVC BALL Valve) 20 mm. As and when required as per direction of Engg-in-charge |
| 101 | Providing and fixing water supply fitting of ISI mark ( uPVC BALL Valve) 25 mm. As and when required as per direction of Engg-in-charge |
| 102 | Providing and fixing water supply fitting of ISI mark Brass Bib Cock 15 mm As and when required as per direction of Engg-in-charge |
| 103 | NON RESIDENTIAL BUILDINGS :- |
| 104 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 105 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore |
| 106 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore |
| 107 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore |
| 108 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 109 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 110 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap |
| 111 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia |
| 112 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 113 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore |
| 114 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore |
| 115 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore |
| 116 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 50 mm dia nominal bore |
| 117 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 litre capacity - White |
| 118 | Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete : White solid plastic seat with lid |
| 119 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore |
| 120 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 80 mm dia nominal bore |
| 121 | Supplying of water supply fitting of ISI mark ( GI Socket) 15mm dia. As and when required as per direction of Engg-in-charge |
| 122 | Supplying of water supply fitting of ISI mark ( GI Socket) 20mm dia. As and when required as per direction of Engg-in-charge |
| 123 | Supplying of water supply fitting of ISI mark ( GI Socket) 25mm dia. As and when required as per direction of Engg-in-charge |
| 124 | Supplying of water supply fitting of ISI mark ( GI Socket) 50mm dia. As and when required as per direction of Engg-in-charge |
| 125 | Supplying of water supply fitting of ISI mark ( GI Elbow) 15mm dia. As and when required as per direction of Engg-in-charge |
| 126 | Supplying of water supply fitting of ISI mark ( GI Elbow) 20mm dia. As and when required as per direction of Engg-in-charge |
| 127 | Supplying of water supply fitting of ISI mark ( GI Elbow) 25mm dia. As and when required as per direction of Engg-in-charge |
| 128 | Supplying of water supply fitting of ISI mark ( GI Elbow) 50mm dia. As and when required as per direction of Engg-in-charge |
| 129 | Supplying of water supply fitting of ISI mark ( GI Tee) 15mm dia. As and when required as per direction of Engg-in-charge |
| 130 | Supplying of water supply fitting of ISI mark ( GI Tee) 20mm dia. As and when required as per direction of Engg-in-charge |
| 131 | Supplying of water supply fitting of ISI mark ( GI Tee) 25mm dia. As and when required as per direction of Engg-in-charge |
| 132 | Supplying of water supply fittings of ISI specification ( GI Nipple) 15mm dia. X 50mm length As and when required as per direction of Engg-in-charge |
| 133 | Supplying of water supply fittings of ISI specification ( GI Nipple) 15mm dia. X 100mm length As and when required as per direction of Engg-in-charge |
| 134 | Supplying of water supply fittings of ISI specification ( GI Nipple) 15mm dia. X 150mm length As and when required as per direction of Engg-in-charge |
| 135 | Supplying of water supply fittings of ISI specification ( GI Nipple) 20mm dia. X 50mm length As and when required as per direction of Engg-in-charge |
| 136 | Supplying of water supply fittings of ISI specification ( GI Nipple) 20mm dia. X 100mm length As and when required as per direction of Engg-in-charge |
| 137 | Supplying of water supply fittings of ISI specification ( GI Nipple) 20mm dia. X 150mm length As and when requiredas per direction of Engg-in-charge |
| 138 | Supplying of water supply fittings of ISI specification ( GI Nipple) 25mm dia. X 50mm length As and when required as per direction of Engg-in-charge |
| 139 | Supplying of water supply fitting of ISI mark ( GI Union) 15mm dia. As and when required as per direction of Engg-in-charge |
| 140 | Supplying of PVC tank cover of approved quality as per direction of Engg-in-charge |
| 141 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes butwithout fittings and the base support for tank. |
| 142 | Providing and fixing 15 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. As per directed of Engg-in-Charge |
| 143 | Providing and fixing 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. As per directed of Engg-in-Charge |
| 144 | Providing and fixing 20 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. As per directed of Engg-in-Charge |
| 145 | Providing and fixing water supply fitting of ISI mark Brass Bib Cock 15 mm As and when required as per direction of Engg-in-charge |
| 146 | Total impact of GST for the purpose of CTC Total in Figures 1253447.1999999997 1253447.1999999997 INR Twelve Lakh Fifty Three Thousand Four Hundred & Forty Seven and Paise Twenty Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender