Tender For Construction Of Nature Interpretation Centre In Suru Valley, Kargil
Tender Value
2.76 Crore
Estimated cost
Bid Submission
23 Oct 2026
11 days left
EMD
5.52 Lakhs
Bank guarantee accepted
Document Fee
2765
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Nature Interpretation Centre In Suru Valley, Kargil
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 2 | All kinds of soil. |
| 3 | Ordinary rock. |
| 4 | Hard rock (blasting prohibited). |
| 5 | Earth work in excavation by mechanical means (hydraulic excavator) over areas (exceeding 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled: All kinds of soil. |
| 6 | Dry stone Pitching in horizontal on level, Excld Cost of stone under footings of columns and foundation of walls, complete as directed by the Engineer-in-charge. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone aggregate 40 mm nominal size).Incld. Carriage complete. |
| 8 | Random rubble masonry with hard stone (quarry stone) in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level and curing complete, with cement mortar 1:6 (1 cement : 6 coarse sand).Incld. Carriage complete. |
| 9 | Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:6 (1 cement : 6 coarse sand), blocks of mix 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size), including cost of required centring, shuttering and curing complete.Incld. Carriage complete. |
| 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level, excluding cost of centring, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). (In column footings, columns, plinth beams, beams, lintels and RCC retaining wall.) |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degrees, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases upto floor five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).Incld. Carriage complete. |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete: 50 mm thick with 20 mm nominal size crushed stone aggregate.Incld. Carriage complete. |
| 14 | 15 mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement, of mix 1:4 (1 cement : 4 fine sand).Incld. Carriage complete. |
| 15 | Centring and shuttering including strutting, propping etc. and removal of form work complete, for: |
| 16 | Foundations, footings, bases of columns etc. for mass concrete. |
| 17 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (columns). |
| 18 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 19 | Suspended floors, roofs, landings, balconies and access platforms. |
| 20 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought, framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fasteners shall be paid for separately): Second class Kail wood, section 3\\" x 5\\" (76 mm x 127 mm). |
| 21 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge: Second class Kail wood, 35 mm thick. |
| 22 | Providing and fixing 12 mm thick prelaminated particle board, flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II, in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge: Prelaminated particle board with decorative lamination on both sides. |
| 23 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class teak wood9.9.1.1 35 mm thick |
| 24 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (walls and ceilings). |
| 25 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification: Two or more coats on new work. |
| 26 | Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. |
| 27 | Finishing walls with water proofing cement paint of required shade: New work (two or more coats applied @ 3.84 kg/10 sqm). |
| 28 | 6 mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand).Incld. Carriage complete. |
| 29 | Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer-in-charge, complete, with 2nd class Kail wood. |
| 30 | Providing and fixing float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm). |
| 31 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish (barrel type) with necessary screws etc. complete: 100 x 10 mm. |
| 32 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300 x 16 mm. |
| 33 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS: 4992 with necessary screws etc. complete: 125 mm. |
| 34 | 25 mm wooden planking, tongued and grooved, in flooring, including fixing with iron screws complete, with: Second class teak wood. |
| 35 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 36 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, complete job. (Roof truss; truss area 460.97 sqm.) |
| 37 | Providing and fixing colour coated track deck CGI roofing sheets of 0.50 mm thickness including all nuts, bolts and fixtures, complete job. |
| 38 | Providing ridges or hips of width 60 cm overall, in plain G.S. sheet, fixed with polymer coated J or L hooks, bolts and nuts 8 mm, G.I. limpet and bitumen washers complete: 0.80 mm thick with zinc coating not less than 275 gm/sqm, specifications as per Engineer-in-charge. |
| 39 | French spirit polishing: Two or more coats on new works including a coat of wood filler. |
| 40 | Providing and fixing ready-made 12 mm thick flooring of approved brand (Action Tesa / Greenpanel) including cutting, carriage, beading etc. all complete job. |
| 41 | Providing and fixing ceramic glazed floor tiles 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 13755, of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete: In all colours and shades except White, Ivory, Grey, Fume Red Brown. |
| 42 | Providing and laying gang saw cut 30 mm thick, mirror polished, pre-moulded and pre-polished machine cut granite stone of required size and shape, of approved shade, colour and texture, in footpath, flooring in road side plazas and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-charge: With granite stone of colour black, cherry / ruby red, of area less than 0.50 sqm. (Verandah and stairs.) |
| 43 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours and shades except burgundy, bottle green and black, of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 44 | 2 Nos. septic tanks with soakage pits, complete. |
| 45 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres, as directed by Engineer-in-charge. Note: Stockpile the top layer of soil of 200 mm and cover it for reuse in landscape (if soil is fertile or capable of being made fertile); soil test to be performed from ICAR Lab as per Green Building Guidelines: |
| 46 | All kinds of soil. |
| 47 | Ordinary rock. |
| 48 | Disposal of malba / excavated earth beyond 50 m (lead upto 6 km) outside campus area (carriage of materials by mechanical transport including loading, unloading and stacking). |
| 49 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level: 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size), mud mat. (Incld. Carriage complete. |
| 50 | Random rubble masonry with hard stone (quarry stone) in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level, with cement mortar 1:6 (1 cement : 6 coarse sand), and curing complete.Incld. Carriage complete. |
| 51 | Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stones (soakage pit).Incld. Carriage complete. |
| 52 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degrees, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases upto floor five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). (Footings, columns, tie beams, main beams and cover slab of septic tank and soakage pit.) (Use of Portland Pozzolana Cement is advised as per Green Building Guidelines, OR 25% replacement of Ordinary Portland Cement with fly ash by weight of cement used in structural concrete.)Incld. Carriage complete. |
| 53 | Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and curing complete: blocks of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size). (Use of Portland Pozzolana Cement is advised as per Green Building Guidelines, OR 25% replacement of Ordinary Portland Cement with fly ash by weight of cement used in structural concrete.)Incld. Carriage complete. |
| 54 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more (quantity as per design). |
| 55 | Centring and shuttering including strutting, propping etc. and removal of form work for footings, columns, tie beams, main beams and suspended floors / cover slab of septic tank and soakage pit. |
| 56 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete: 50 mm thick with 20 mm nominal size stone aggregate. (Use of Portland Pozzolana Cement is advised as per Green Building Guidelines, OR 25% replacement of Ordinary Portland Cement with fly ash by weight of cement used in structural concrete.) |
| 57 | Supplying and fixing C.I. cover without frame for manholes: 560 mm diameter C.I. cover (heavy duty), the weight of the cover to be not less than 108 kg. |
| 58 | 12 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand). (PPC or cement with more than 25% fly ash is recommended as per Green Building Guidelines.)Incld. Carriage complete. |
| 59 | SANITARY AND PLUMBING |
| 60 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rest. |
| 61 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 62 | Providing and fixing wash basin with C.I. / M.S. brackets, 15 mm C.P. brass pillar taps (Kingston / Gem / Techno / Parko / Jaguar / Essco), 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White vitreous china wash basin size 630 x 450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 63 | Providing and fixing white vitreous china pedestal for wash basin, completely recessed at the back for the reception of pipes and fittings. |
| 64 | Providing and fixing white vitreous china flat back half stall urinal basin of 580 x 380 x 350 mm with flat white P.V.C. automatic flushing cistern of approved make, with fittings, C.I. / M.S. brackets, standard size C.P. brass flush pipe, spreaders with unions and clamps complete (all in C.P. brass), with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern of approved quality. |
| 65 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground, fixed to wooden cleats with C.P. brass screws and washers complete. |
| 66 | Providing and fixing PTMT waste coupling for wash basin and sink, of approved quality and colour: Waste coupling 38 mm dia, of 38 mm length, weighing not less than 60 gms. |
| 67 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete: Semi rigid pipe 32 mm dia. |
| 68 | Providing and fixing C.P. brass towel rail complete with brackets, fixed to wooden cleats with C.P. brass screws, with concealed fitting arrangement, of approved quality, colour and make (Prayag or equivalent): 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 69 | Providing and fixing C.P. brass toilet paper holder. |
| 70 | Providing and fixing soap dish of C.P. brass, 112 mm distance from wall, of standard shape, with bracket of the same material with snap fittings, of approved quality, colour and make, weight not less than 105 gms (Prayag or equivalent). |
| 71 | SOIL, WASTE AND VENT PIPES |
| 72 | Providing and fixing soil, waste and vent pipes: |
| 73 | PVC pipe 100 mm dia. |
| 74 | PVC pipe 75 mm dia. |
| 75 | Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap. |
| 76 | Providing and fixing P-trap for English type W.C. with washer and M.S. clamps, complete job. |
| 77 | Providing and fixing double equal plain junction of required degree: |
| 78 | 75 x 75 x 75 mm PVC. |
| 79 | 100 x 100 x 100 mm PVC. |
| 80 | WATER SUPPLY |
| 81 | Providing and fixing 3 layer PP-R (Poly Propylene Random copolymer) pipes SDR 7.4, UV stabilised and anti-microbial, fusion welded, having thermal stability for hot and cold water supply, including all PP-R plain and brass threaded polypropylene random fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes cost of cutting chases and making good the same, including testing of joints complete as per direction of Engineer-in-charge (concealed work including cutting chases and making good the walls etc.): |
| 82 | 16 mm OD nominal bore. |
| 83 | 32 mm dia nominal bore. |
| 84 | 40 mm dia nominal bore. |
| 85 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931: 15 mm nominal bore. |
| 86 | Providing and fixing unplasticised PVC connection pipe with brass unions: 30 cm length, 15 mm nominal bore. |
| 87 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points, of approved make, conforming to IS: 8931: 15 mm nominal bore. |
| 88 | Providing and fixing C.P. brass single hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg: 15 mm nominal bore, of standard back type. |
| 89 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked indicating the BIS licence number, with cover and suitable locking arrangement, and making necessary holes for inlet, outlet and overflow pipes, but without fittings and the base support for tank (Sintex, Electroplast, Star, Lotus or equivalent having valid ISI licence). |
| 90 | Making connection of PP-R distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 20 to 32 mm nominal bore. |
| 91 | Providing and fixing PVC gate valve, complete job: for 32 mm dia pipe. |
| 92 | Providing and fixing PUF insulation including covering with wire mesh and aluminium sheet of 0.6 mm thickness, complete job: for 32-40 mm dia pipe. |
| 93 | Providing and fixing heat tape, 30 watts, of multi layer, including wiring over pipe line in spring shape, all complete job. |
| 94 | Providing and fixing thermocold flex over pipe line for insulation, all complete job. |
| 95 | FOOTPATH |
| 96 | Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge: |
| 97 | All kinds of soil. |
| 98 | Hard rock (blasting prohibited), by manual means. |
| 99 | Dumping stone excluding cost of stones, in horizontal on level. |
| 100 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor five level, including curing but excluding the cost of centring, shuttering and finishing, with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size).Incld. Carriage complete. |
| 101 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 102 | Providing and laying 40 mm thick factory made cement concrete interlocking paver blocks of M-30 grade, made by block making machine with strong vibratory compaction, of approved size, design and shape, in required colour and pattern, laid over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 103 | ELECTRIFICATION |
| 104 | Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 105 | Wiring for light / power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 106 | Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required: |
| 107 | 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire. |
| 108 | 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire. |
| 109 | 2 x 10 sq.mm + 1 x 6 sq.mm earth wire. |
| 110 | 4 x 16 sq.mm + 2 x 6 sq.mm earth wire. |
| 111 | Supplying and fixing following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required: |
| 112 | 5/6 A switch. |
| 113 | 3 pin 5/6 A socket outlet. |
| 114 | TV antenna socket outlet. |
| 115 | Supplying and fixing modular blanking plate on the existing modular plate and switch box, excluding modular plate, as required. |
| 116 | Supplying and fixing suitable size GI box with modular plate and cover in front, on surface or in recess, including providing and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connections etc. as required. |
| 117 | Supplying and fixing suitable size GI box with modular plate and cover in front, on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 118 | Supplying and fixing following way, horizontal type, three pole and neutral, sheet steel MCB distribution board, 415 V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted, including earthing etc. as required (but without MCB / RCCB / isolator): |
| 119 | 6 way (4 + 18), double door. |
| 120 | 8 way (4 + 24), double door. |
| 121 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, 'C' curve miniature circuit breaker suitable for inductive load, of following poles, in the existing MCB DB complete with connections, testing and commissioning etc. as required: Single pole, 6/16 A. |
| 122 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess, including cutting the wall and making good the same in case of recessed conduit, as required: 25 mm. |
| 123 | Supply, installation, testing and commissioning of GI electrode earthing with 84 mm dia, 3 metre long and 3 mm thick electrode; the electrode should be hot dip galvanised. The GI electrode shall be pre-filled with Crystalline Conductive Material (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact between the electrode and the soil; the compound should be eco-friendly. GI electrode earthing should be maintenance free and should not require regular manual addition of water. The earthing pit should be covered with PVC cover. |
| 124 | Supplying and laying 25 mm x 5 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut, bolt and spring washer.) |
| 125 | Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 126 | Supplying and fixing following rating, breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board, including drilling holes in cubicle panel, making connections etc. as required: |
| 127 | MCCB, four pole, 200 A, 36 kA. |
| 128 | On-load changeover switch, 100 A. |
| 129 | Fabrication, supplying, installation, testing and commissioning of following panel made out of 2 mm thick M.S. sheet, floor mounted, vermin and dust proof, indoor type, duly painted, with provision for fixing of 1 No. incomer MCCB, 1 No. MCCB type changeover switch, including supply and fixing of 2 sets of aluminium bus bars and strip for housing 24 Nos. MCBs, MF digital meter and other allied accessories as required (make as per annexure). |
| 130 | Supplying and fixing of following rating, 240/415 V, 'C' series miniature circuit breaker suitable for lighting and other loads, of following poles, in the existing MCB DB complete with connections, testing and commissioning (above 32 A): |
| 131 | SPN, 63 A. |
| 132 | TPN, 63 A. |
| 133 | Supplying and fixing of 1.1 kV grade XLPE insulated and PVC sheathed power cable of following sizes on surface / on cable tray / 0.50 metre below ground level etc. as required, including carriage upto site of work (make as per annexure enclosed): |
| 134 | 95 sq.mm, 3.5 core, armoured. |
| 135 | 50 sq.mm, 3.5 core, armoured. |
| 136 | Supplying and fixing of 120 watt LED street light complete with GI pipe bracket duly embedded along the parapet / wall: Wipro LR02-132-XXX-57-G2 or equivalent approved make. |
| 137 | Supplying and fixing 20 watt LED tube light fitting: Wipro LL20-221-XXX-65NE3 or equivalent make and model of Philips / Crompton Greaves. |
| 138 | Supplying and fixing of angle / batten holder (polycarbonate) with 9 watt LED lamp, including making complete connections etc. as required (make as per annexure enclosed). |
| 139 | Supplying and fixing of following electrical items suitable for operating on 240/230 V AC, 50 Hz supply, including connections etc. as required: Exhaust fan 250 mm size (heavy duty), CG Transair or equivalent approved make. |
| 140 | Supply and fixing LED type down lighter, 12 watt. |
| 141 | Supply and fixing LED type down lighter, 15 watt. |
| 142 | Supplying, installation, testing and commissioning of LED 2' x 2' recess mounted fixture that delivers at least 3000 lumens with wattage not more than 36 watt. The luminaire shall have a CRCA powder coated body and a high efficiency diffuser: Wipro CRCO10 RO 38HP57GL or equivalent approved make. |
| 143 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor, PE insulated, shielded with fine tinned copper braid and protected with PVC sheath, in the existing surface / recessed steel / PVC conduit as required. |
| 144 | Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing PVC conduit as required: |
| 145 | 1 run of cable. |
| 146 | 2 runs of cable. |
| 147 | 3 runs of cable. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender