Tender For Repair / Replacement Of Stone Masonary And Brick Works , Retaining Walls , Fecncing At Age (I) Chakrata Under Hq Cwe Dehradun
Tender Value
46.70 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
6 days left
EMD
93400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement Of Stone Masonary And Brick Works , Retaining Walls , Fecncing At Age (I) Chakrata Under Hq Cwe Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | M&L for PCC 1:4:8, Type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete including demolition of cement concrete (unreinforced ) in ground floor and pavings n exc 15cm and removing the debris & spreading in nearby low laying areas complete all as specified and as directed. |
| 2 | M &L for Walling of Random Rubble masonry, uncoursed, well bounded, bedded and solidly hearted, Built in Cement Mortar 1:4 including demolition of old Stone masonry built in Cement mortar incluing all quions, arches, pillars, etc and disposal/removing of debris from site complete all as specified and as directed |
| 3 | All as per Item No. 02 above but except stone and built in cement mortar 1:4 complete all as specified and as directed. (old stone obtained from demolition shall be re-used) |
| 4 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 40mm to face stones and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto courses for Granite or Trap stone, complete all as specified ans as directed. |
| 5 | M&L for PCC 1:2:4, Type B-0, (using 12.5mm graded crushed stone aggregate) as in benching, bed plates, copings and the like including necessary formwork, complete all as specified and as directed. |
| 6 | M&L for Precast Cement concrete (1:2:4) Type B-0 (using 12.5mm graded crushed stone aggregate) set in cement mortar 1:6 in bond stones for stone masonry and the like including necessary formwork, complete all as specified and as directed. |
| 7 | M&L for Flush pointing in Cement mortar 1:4 to random rubble masonry, uncoursed or brought upto courses complete all as specifed and as directed. |
| 8 | M&L for Boulder Filling dry hand packed tightly as in back of wall complete all as specified and as directed. |
| 9 | S & F 110mm bore of pipe PVC (SWR) single sockted in any length as in weep holes of in walls/retaining walls etc complete all as specified as directed. |
| 10 | M&L for Brickwork with subclass 'B bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 including demoltion of old brickwork built in Cement mortar and removing debrisfrom site complete all as sepcfied and as directed. |
| 11 | M & L for Rendering 15mm thick in CM (1:4) on fair faces of brick work and finish surface even and smooth without using extra cement and applying two coats of cement base paint over a coat of alkali resistant priming coat including preparation of new plastered surface of wall complete all as sepcfied and as directed. |
| 12 | Dismantling of fencing, wire mesh of any type and in any position by unscrewing nuts fillets, clamps complete all as directed. |
| 13 | Dismantling posts or strut (Wood, steel or RCC fencing posts) any section and taking out embedded portion (post embedded in natural ground) including making good to disturbed ground surfaces complete all as directed. |
| 14 | All as per serial item No. 13 here-in-before but post embedded in concrete/brick masonary etc complete all as specified and as directed. |
| 15 | S&Fr galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2.00 mm dia, barbs at 75mm spacings and straining, tightening and fixing to MS nibs embedded in pre-cast RCC fencing post or angle iron post, struts, etc. securing and tying at crossings with and provision of galvanized mild steel wire complete all as specified and as directed.Note: Each line wire to be measured separately. |
| 16 | Supply only Galvanized steel wire chain link fencing 100 mm x 100 mm mesh, including binding wire / line wire etc complete all as specified and as directed. |
| 17 | Fixing only Galvanized steel wire chain link fencing 100 mm x 100 mm mesh, fixed to RCC fencing post with bolts etc including fixing of binding wire / line wire etc complete all as specified and directed. Note :- (a) Supply of Galvanized steel wire chain link fecncing, Mild steel round bars, Mild steel flat, Nuts, Bolts & Washers will be measured and paid separately. |
| 18 | S&F mild steel bolts (machine made) with hexagonal head at one end and screwed the other end, each screw end to be fitted with two washers and one nut hexagonal, dia of shank 12mm, length of bolt 50mm to 100mm complete all as specified and as directed. |
| 19 | S&F 10 mm dia mild steel round bars as in stiffener to chain link fencing including necessary cutting bedding etc. conforming to Grade-I, IS 432 (Part-I) complete all as specified and as directed. |
| 20 | S&F mild steel work such as band, clamps, FI fillet for securing wire mesh, straps, ties etc. and similar works, fabrication for steel sections conforming to conforming to Fe-290 (Grade E-165) including necessary welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated complete all as specified and as directed. |
| 21 | S&F rolled mild steel as in joist, channel, angle or tee section, fixed independently with connecting base plate etc. as in fencing post, strut bend to shape, holes drilled/ notches cut out to receive MS bolts and barbed wire, embedded to concrete including tarring to steel work embedded to concrete complete all as specified and as directed. |
| 22 | M&L for PCC 1:4:8, Type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and as directed |
| 23 | M&L for preparation of new or previously untreated steel or iron surfaces, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 24 | M&L for preparation of new steel or iron surfaces not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender