Tender For Day To Day Maintenance B/R Complaints Including Roofting Joinery, Plastering, Plumbing, Sanitary Fitting, Tiling, Flooring And Petty Repair Of Water Leakage/ Seepage And Other Misc Work In The Aor Area-Iii Of Age B/R-I Under Ge (W) Jabalpu
Tender Value
95 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
30 days left
EMD
1.67 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance B/R Complaints Including Roofting Joinery, Plastering, Plumbing, Sanitary Fitting, Tiling, Flooring And Petty Repair Of Water Leakage/ Seepage And Other Misc Work In The Aor Area-Iii Of Age B/R-I Under Ge (W) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Notes: 1. Contarctor Should deploy 1 Nos of Carpentor with helper ,1 nos of Plumber with helper ,1 Nos Mason with helper alongwith T & P for day to day complaints of B&R everday excluding Sunday and holiday during the period of contract . Tradesman with helper Should report to MES complaint cell of B&R on working day at 9.00 AM .Rates for tradesman deems included in CA . No extra payments will be done for the tradesman and helper . 2. Contractor should submit 70 % material catered in CA after sample approved from GE (Plumbing fittings ,Sanitary fittings , Joinery fittings and other day to day complaint required items catered in CA) to MES complaint cell ,Separate store will be provided for it , Items will be issued from complaint cell everday to the Contractor /Representative of contractor / Tradesman deployed by the contractor . |
| 2 | Taking down cement plaster and grit plaster any description on brick or stone walls,ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 3 | M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed |
| 4 | M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth without using extra cement complete all as specified and directed |
| 5 | M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over 1 mm thick wall care putty on wall plastered surface over a coat of primer complete all as specified and as directed. |
| 6 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and as directed. |
| 7 | Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed and incl Sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane. all as specified and directed by Engr-in-charge. |
| 8 | S&F 3 mm figured glass, pin head type and glazing with beads\oil putty fixed with m in squares n exc 0.5 Sqm in Each pane complete all as specified and directed. |
| 9 | Roughening surfaces of old concrete floor/ terrace by picking incl. taking down existing detiorated / decayed tar felt PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. including taking down of old cement plaster bedding below old roof treatment at any height of bldg complete all as specified and directed. |
| 10 | M&L for 10 mm thick rendering in CM 1:3 mixed with Liquid water proofing compound as per manufactures instruction concrete roof surface to maintain the proper slope of roof surface etc complete all as specified and directed. |
| 11 | M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs complete all as specified and directed. (a) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non woven fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame. |
| 12 | Supply only liquid water proofing compound. |
| 13 | M&L for complete removal of existing treatment of old surfaces of ceiling includinng preparation of on plastered or unplastered surfaces and applying two coat of distemper oil emulsion on ceiling complete all as specified. |
| 14 | M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of Plastic emulsion paint on wall complete all as specified. |
| 15 | M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of Plastic emulsion paint on ceiling complete all as specified. |
| 16 | M&L for complete removal of existing treatment of old surfaces of wall and Preparation of old surface of wall exposed upto mother surface filled all cracks then applying two coats pidilite product Dr fixit Rain coat over one coat of primer , primer seal complete in all respect as specified as directed. |
| 17 | M&L for complete removal of existing treatment of painted surfaces incl preparation of old undecorated surface of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and as directed. |
| 18 | M&L for complete removal of existing treatment of surfaces incl preparation of old undecorated surface of walls and applying two coats of oil bound distempered over 1 mm thick wall care putty on wall over priming surafce complete all as specified and directed |
| 19 | M&L for preparation of old plastered surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 20 | M&L for French polishing on wooden surfaces of any description, width or girth includingcomplete removal of old paint , cleaning and preparing the surfaces including a coat of wood filler on old works with one or more coats on old work upto satisfaction level etc complete all as specified and directed. |
| 21 | Preparing surfaces of any description of wood, steel, iron, concrete, brick etc andblack paint then writing letter exc 10 cm high but n.exc 30 cm high and width as directed with white synthetic enamel paint of superior grade for writing building numbers in complete all as specified and directed. |
| 22 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 23 | M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 24 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 25 | Dismantling of timber scantlings unframed 40Sq Cm and over in section, in any position complete all as specified and directed. |
| 26 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, wind ties etc. conforming Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed. |
| 27 | M&L for Second class hard-wood in scantlings and clean sawn timber framed and fixed complete all as specified and directed. |
| 28 | Dismantling of Asbestos cement (corrugated, semi corrugated,etc) sheets in roof covering complete all as specified and directed. |
| 29 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering incl ridge complete all as specified and directed. |
| 30 | M&L for 6mm thick non asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed. |
| 31 | S & F of 0.50 mm thick Precoated Metacolor Sheet (Pre painted galvanized) LYSAGHT TRIMDEK® 1015 is fixing with clips manufactured from COLORBOND XRW steel®, high tensile steel with minimum 550 MPa yield strength, metallic hot-dipped coated with Al-Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si ) as per AS1397/ IS15961 standards and ZINCALUME AZ150 (min. 150 g/m2 total on both sides) with Super Durable Polyester COLORBOND XRW steel® quality paint system of approved colour, suitable for exterior application conforming to AS/NZS 2728 type-4 / IS15965 class 3 of Tata BlueScope Steel make.The sheets have a total coating thickness of 35 microns, super durable polyester COLORBOND XRW quality paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface and over 5 micron primer coat on both surfaces. The paint system is made of stable resin & inorganic pigments for paint durability and is lead free, making it suitable for rainwater harvesting complete all as specified and directed. (Note : Roof Sheet will be fixed as per manufacturer instructions) |
| 32 | S&F for 0.50 mm thick GI Flashing/ridge ( (Pre painted galvanized) LYSAGHT TRIMDEK® 1015 is fixing with clips manufactured from COLORBOND XRW steel®, high tensile steel with minimum 550 MPa yield strength, metallic hot-dipped coated with Al-Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si ) as per AS1397/ IS15961 standards and ZINCALUME AZ150 (min. 150 g/m2 total on both sides) with Super Durable Polyester COLORBOND XRW steel® quality paint system of approved colour, suitable for exterior application conforming to AS/NZS 2728 type-4 / IS15965 class 3 of Tata BlueScope Steel make.The sheets have a total coating thickness of 35 microns, super durable polyester COLORBOND XRW quality paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface and over 5 micron primer coat on both surfaces. The paint system is made of stable resin & inorganic pigments for paint durability and is lead free, making it suitable for rainwater harvesting complete all as specified and directed. (Note : Roof Sheet will be fixed as per manufacturer instructions) |
| 33 | M&L 0.71 mm Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length andgirth as fixed) |
| 34 | Material and labour for cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping, coving etc complete all as specified and directed. . |
| 35 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.. |
| 36 | M&L for Brick work using old size of fly ash bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and directed. |
| 37 | M&L for half brick thick wall with FLY ASH Bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete etc all as specified and directed. |
| 38 | M&L for 5mm thick cement plaster in cement mortar 1:3 as on ceiling, soffits of RCC shelves, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 39 | M&L for Prepration of new surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying two coat of distemper oil emulsion on ceiling complete all as specified. |
| 40 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 41 | M & L for 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed. |
| 42 | S & F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm Each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm Each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 43 | Supply & Fixing in repair factory Made Single Exuded WPC [Wood plastic Composite) Iouver Panels of 10mm to 18mm thickness and the sizes are 150mm, 170mm, 224mm, 300mm (width) x 2900mm (Length).Panels shall be moisture-resistant, termite-proof, fire-retardant. All joints. corners and terminations shall be finished with matching WPC trims and accessories. Work includes surface preparation, edge finishing and accessories such as corner profiles and caps adhesive scaffolding and cleaning of surface after installation, complete in all respects as per drawing and direction of the Engineer-in-charge. |
| 44 | Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion at the rate 2.25 liters per linear meter including drilling & plugging holes etc. in apron. |
| 45 | Post Constructional Anti-termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same |
| 46 | Material & Labour for repairing sunken floors leakage by taking out existing nahani trap or floor traps carefully by digging out from its position and provision of new PVC (SWR) nahani trap 100mm dia and joining the same to existing waste pipe and ensure leak proof joints including PCC 1:5:10, Type E-2 and making good the adjoining area to match with existing floor tiles etc with PVC NT / FT, CP steel grating 100 mm dia complete all as specified & directed. |
| 47 | Sunken floor(a) Complete removal of existing raw materials ,WC and demoliton of existing concrete from sunken floor and clean the surface with broom for inspection of Engr-in-Charge(b) Provide 1:3 CM plaster with water proofing compound to sunken portion including walls of sunken portion, thickness of plaster minimum 10 mm in sunken floor with proper slope towards outside when conc is green. (c) Provide bitumen primer and a coat of bitumen at 1.2 Kg/Sqm.(d) Lay polythene film of 200 micron over sunken floor as well as walls.(e) Lay 50mm dia GI pipe spouts resting in lower portion or slope of sunken portion projecting outside through walls.(f) Lay 25 mm thick sand cushion over polythene film.(g) Fill PCC (1:4:8) 200mm in sub base. The floor to be flood tested for 72 hours for water tightness |
| 48 | Taking down eaves gutters and rainwater pipes (any size or pattern ), including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store complete all as specified and directed. |
| 49 | S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 50 | S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed. |
| 51 | S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 52 | S&F 75 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed. |
| 53 | S&F 110 mm dia PVC (SWR ) bends any radius complete all as specified and as directed. |
| 54 | S&F 75 mm dia PVC (SWR ) bends any radius complete all as specified and as directed. |
| 55 | S&F 110 mm dia PVC (SWR ) branch piece,single (single Y) equal or unequal complete all as specified and as directed. |
| 56 | S&F 75 mm dia PVC (SWR ) branch piece,single (single Y) equal or unequal complete all as specified and as directed. |
| 57 | S&F 110 mm dia PVC (SWR ) junction,single (single T) equal or unequal complete all as specified and as directed. |
| 58 | S&F 75 mm dia PVC (SWR ) junction,single (single T) equal or unequal complete all as specified and as directed. |
| 59 | Dismantling of Stone slabs and tiles of any description or thockness , aprons laid bedded and pointes in any mortar complete all specified and directed. |
| 60 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 61 | Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and as directed. |
| 62 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in floor finishes 75 mm thick plinth protection laid in panels & finished even and smooth without using extra cement complete all as specified and directed. |
| 63 | M&L for 25 mm thick PCC 1:2:4 type B-1,1:2:4 (20mm graded naggregate) as in floors as sub base in etc all as specified and directed by Engr-in-charge. |
| 64 | Material and labour for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 65 | M&L for Vitriefied tiles 9-10 mm thick LIGHT SHADE (square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm in patches in floor including 15mm thick screed bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified. |
| 66 | M&L for Vitriefied tiles 9-10 mm thick LIGHT SHADE (square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm in patchesin skirting/Dado including 10mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified. |
| 67 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of Each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor in patches etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 68 | M&L for non skid ceramic tiles/ non skid tiles coloured, area of Each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in patches as per the existing tiles and size as suitable/ matching with the existing tiles in dados/skirting including set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including screed bed or bedding layer 10 mm thick rendering in CM 1:4 for laying floor finishes complete all as specified and directed. |
| 69 | M&L for Non skid ceramic joint free coloured tiles 7 to 8 mm thick (Square or rectangular) area of Each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc in patches set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.. |
| 70 | M&L for Non skid ceramic joint free coloured tiles 7 to 8 mm thick (Square or rectangular) area of Each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in skiriting/dado etc in patches set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.. |
| 71 | M&L for ENDURA of Johnson or equivalent outdoor full body Vitrified tiles 30 cm x 30 cm x 10 mm thick, jointed and pointed in neat cement slurry and pointed in white on coloured cement to match as in floors etc laid over in patches and including screed bed or bedding layer of cement mortar 1:6, 15 mm thick etc all complete (Make-H & R Johnson, Brand-Endura designer digital series) |
| 72 | M&L for 9-10 mm thick coloured Vitrified tiles (square/ rectangular) nano tech, area of Each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm Each in patches at floor set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) laid over and including 15mm thick Screed bed in CM 1:6 complete all as specified and as directed. |
| 73 | M & L for 20 mm thick Granite (zed Black) work (table rubbed and polished) in cooking platforms including bedded in CM 1:4 and jointed with grey cement slurry and pointed to match the shade of granite stone in patches etc complete all as specified and as directed. |
| 74 | M&L for rounding the edges of granite stone slabs open edge, such as in cooking platform, and other similar situations all as specified and as directed. |
| 75 | M&L for providing Machine cut Cudapph stone slab as on cooking platform/shelf 25-40 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 76 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment in floors including 15 mm thick screed bed in CM 1:6 for laying floor finish complete all as specified and all as direcred. |
| 77 | M&L for Machine pressed precast Coloured cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade etc all complete. |
| 78 | Ditto all as per above items but of 80 mm thick M-40 Grade |
| 79 | M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed |
| 80 | Taking down chowkats or frames exc 1.50Sqm but n exc 4 Sqm with shutter (without taking off shutters from the frames). |
| 81 | Taking down shutter n exc 1.00 Sqm of any description |
| 82 | Taking down shutter exc 1.0 Sqm but n exc 2.0 Sqm Each of any description |
| 83 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 62x67 mm(tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 84 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories as per manufactures instructions Net opening will be measured for payment purpose.) |
| 85 | Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 Sqm upto 5.00 Sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 86 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size Frame size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applyingPVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressivestrength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ®Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 87 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S Sscrews shall be paid separately) |
| 88 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 89 | M&L for 35mm thick factory made second class hardwood glazed and skelton door (minimum 3 panel in Each shutter ) shutters open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars, size of members of shutter as specified in SSR Part-I section 8, clause 8.20 (a) complete. |
| 90 | S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints |
| 91 | M&L for 30 mm thick second class hard wood flush shutters solid core construction with block board core and plywood face panels commerical type on both side rebated & prepared to receive glass all as specified in SSR Part-I section 8, clause 8.20 (b) complete. |
| 92 | S&F Plain colour 1 mm PVC sheet fixed or laid on to flush door by using rubber based adhesive suppling and fixing at site as per specification |
| 93 | S&F Stainless Steel handles suitable for Aluminium powder coated door shutters not less than 300mm long design/Make as approved by GE (ISI Mark) complete all as specified and directed |
| 94 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm complete all as specified and directed. |
| 95 | S&F in repair 50 mm size magnet catcher, cupbord lock, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 96 | S&F, Aluminium anodised sections powder coated for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately. |
| 97 | S&F 5.5 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane Please Enable Macros to View BoQ information |
| 98 | S&F 5.5 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 30 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 37 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender