Tender For Installation Of Decorative Street Lights With Railing-Side Mounts On Both Sides Of The Road From Subedarganj Rotary To The High Court Flyover In Prayagraj.
Tender Value
2.36 Crore
Estimated cost
Bid Submission
05 Nov 2026
6 days left
EMD
4.73 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Decorative Street Lights With Railing-Side Mounts On Both Sides Of The Road From Subedarganj Rotary To The High Court Flyover In Prayagraj.
BOQ
| Sl. No. | Item Description |
| 1 | S/F 63 KVA 11/0.433 KV, Level-2 BIS Standard, as per present UPPCL's Specifications & approved make. |
| 2 | S/L of 3 Core standard aluminium conductor XLPE (Cross linked Polyethylene) insualted PVC bedded, Galvanized flat steel strip armored 70 Sqmm 3 Core 11 KV grade cable confirming to I.S. 7098 ( Part-II with latest amendement) at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river. sand al around and protected with well burnt bricks in sides and on top put across. The armoring of cable shall be properly connected with earth conductor by clamps etc. |
| 3 | S/F of 70 Sq mm 11 KV Joint Kit/Straight through complete. Rate PSR |
| 4 | S/F of 2500mm x 220 x 220 x 3 Decorative column light Pole as per driving are made out of galvanized Mild Steel body with laser cut on disen with PC Difuser with 90 watt LED Light with 4 Way Connector Available in cool white/Arm white column is primer coated with all MCB in provided at bottom section and Base Plate 300 x 300 x 12mm with all foundation bolt and Installation on Site all complete. |
| 5 | S/F of factory fabricated and wired metal Gland dust & vermin proof floor mounting distribution TPN feeder pillar with incoming 100 Am. 1 Nos MCCB and outgoing 63 Amp 2 Nos. cubical type with required busbar as IS 8623 with Insulated Heat Shrink sleeving and mouting on non Hygroscopic support as CMC/BMC. With 3 No indicator, The Pillar should be fabricated with CRCA sheet 2 mm thick Painted with High quality Paint with locking arrangement complete with cable Gland complete. |
| 6 | SITC of TPMO Set and DO Fuse Set 11 Kv with Handle clamps nuts bolts and required Fuse complete in all rerspect Rate UPPCL 2017-18 |
| 7 | S/F of 200 Amp Busbar Box made of 16 SWG CRCA Sheet including TPN Aluminium Busbar complete with locking arrangement with required Clamps nuts & bolts and grouting / .Fixed on Wall |
| 8 | S/L of Aluminium conductor PVC Insulated armoured served sheathed 120Sq mm x 3.5 Core LT cable 1100 volts grade at a depth of 750mm below ground level ove a cushion of 756 mm. Thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. |
| 9 | Same as Above but size 50Sq mm x 3.5 Core LT cable |
| 10 | Same as Above but size 16 Sq mm x 4 Core |
| 11 | Same as Above but size 10 Sq mm x 4 Core |
| 12 | S/F of 120 Sq mm cable Lugs |
| 13 | S/F of 50 Sq mm cable Lugs |
| 14 | S/F of 16 Sq mm cable Lugs |
| 15 | S/F of 10 Sq mm cable Lugs |
| 16 | Earthing of pole by MS earthing rod of 20x2500mm and 6 SWG earthing wire etc |
| 17 | S/Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. |
| 18 | S/F of following capacity of Automatic street light cubicle control Panel painted with anti corrosive alkali and acid proof paint considering of time switch TSO 100 series/Digital type with Contactors, HRC fuses, 100 Amp MCCB isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complte |
| 19 | Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/service bracket including binding etc. complete in all respect |
| 20 | Supply & laying of following 50 mm dia (OD-50 mm nominal) DWC HDPE pipe 6 Kg ISI marked alongwith all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting. Jointing etc, |
| 21 | S/L of 6 Sq mm Twin Flate unarmoured cable complete with proper connections Rate PSR in PDA |
| 22 | Same as above 90 mm dia (OD-90 mm & ID-76 mm nominal) 6 Kg ISI marked alongwith all accessories |
| 23 | Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface complete in all respects as approved by Engineer-in-charge SOR-710/2018 |
| 24 | Trenchles Drilling with HDPE 100 mm dia HDD for caring of Cable on Road Crosing complete with Repairing of all internal water connection/Sever Connection if necessary complete |
| 25 | S/L of 110mm Dia HDPE pipe having pressure rating |
| 26 | Deduction of Cable Rate during erection in Pipe/Duct ( Duct will be made by civil work Estimate) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender