Tender For Development Of Playground Along With Changing Room With Mini Park And Open Air Gym In Ward No. 04
Tender Value
42.17 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
16 days left
EMD
42200
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Playground Along With Changing Room With Mini Park And Open Air Gym In Ward No. 04
BOQ
| Sl. No. | Item Description |
| 1 | Earth work Excavation in all kinds of soil within intial lead and lift including rough dressing and levelling the ground in F&P etc. complete. |
| 2 | Supplying and filling F&P with river sand with well watering and ramming etc. complete. |
| 3 | Supplying all materials, labour, T&P and providing Cement Concrete (1:4:8) using 4 cm size bhg CB metal etc. complete. |
| 4 | R.C.C. work of M20 grade with 20 mm down graded chips (C.B.) including hoisting & laying concrete including centering and shuttering with well watering and curing etc complete. RCC Column Footing |
| 5 | RCC Plinth Bend |
| 6 | RCC Column |
| 7 | RCC Lintel |
| 8 | RCC Roof Beam |
| 9 | RCC Roof Slab |
| 10 | RCC Chajja |
| 11 | Straightening, cutting, bending and binding, welding and jointing (if necessary) coiled/bent up M.S. rods/Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 guage binding wire required for R.C.C. work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wires will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S. rods or Tor steel linear measurements of rod for finished item of works etc complete as per direction of EIC |
| 12 | First class Fly Ash brick work in cement mortar (1:4) in foundation and plinth with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 13 | Superstructure |
| 14 | 12mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 15 | 12mm thick C:P (1:4) over brick work including cement punning over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 16 | 16mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 17 | 6mm thick C.P. in C.M.(1:4) over RCC Surface finished smooth including close deep chipping & slurry treatment with watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 18 | 2.50 cm thick grading concrete using C.C. (1:2:2) on roof slab with 6mm sizes down graded H.G. chips on new work (For 1 Sqmt) |
| 19 | supplying fitting and fixing of vertrifed tile in floors of size 600mm x 600mm(plain) of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 Course sand) and filling joints with white cement of approved quality including cost , conveyance, taxes, cost of all labour etc. complete. (Data for 10 sqm) |
| 20 | Fixing tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. |
| 21 | Providing fifting and fixing of Al. door with anodized Al. door section No.9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by meand of jointing angle No. 1855 including all cost of labour, T&p, hire charges of drilling machine, labour charges etc.complete. |
| 22 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame. shutters and all fitting and fixtures. |
| 23 | C:C: (1:2:4) using 12 mm to 20 mm size H.G. stone chips including the cost of all materials labour carriage, royalty etc complete. |
| 24 | Labour for spreading dust and consolidation with H.R.R including watering and including the cost & conveyance of dust. (Data for 2.83 Cum) |
| 25 | Rigid smooth centering and shuttering for R.C.C. works including false works and dismantlling them after casting including cost of materials complete in G.F. |
| 26 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required size/Pattern, finishing and sweeping extra sand in footpath , parks, lawns, drive ways, or light traffic parking and Lanes/Road etc, all complete as Per Manufacturers Specifications and Driection of Engg -In -Charge. 60mm thick C.C. Paver Blocks of M-35 grade With approved colour design Pattern etc. complete |
| 27 | Two Seated Arch swing. • Area: 4’ft X 5’ft. • Safe area: 8’X 10’ft. • Height: 7’ft. • Age Group:-3-14yr. • 2no of rubber seat. • 2 no. Of arch G.I pipe structure (65mm ID-B class G.I pipe with thickness 3mm). • 1 no. Of top G.I bar (50mm ID-B class G.I medium pipe with Thickness 3mm). • Chain: 8mm SS Chain rubber coated. Paint: Powder coating. Minimum gross weight:-130kg |
| 28 | Merry -go- round. • Area: 5’ft Dia. • Safe area: 10’X 10’ft. • Height: 2’ft. • Age Group:-3-12yr. • Seat: 4no FRP. • Pipe: 40mm ID-B class G.I Pipe. • Handle: 20mm ID-B class G.I Pipe.(minimum3mm thick) Paint: powder coating. Minimum gross weight:-75kg 200gm |
| 29 | Two seated sea - saw. • Area: 6’X 8’ft. • Safe area: 8’X 10’ ft. • Height: 24’. • Age Group:-2-10yr. • Seat: 04 no of FRP seat. • Pipe: Main pipe: 6’length of 50mm ID G.I pipe. • Seating pipe: ‘8’ length 50mm ID G.I Pipe.(minimum 3 mm thick) Paint: powder coating Minimum gross weight:-66kg 500gm. |
| 30 | Spiral Slide. • Area: 10’X16’ ft. • Safe Area: 15’X20’ ft. • Height :7’ • Age Group:-3-14yr. • Slide: FRP. • Pipe: Deck pipe: 50mm ID B-Class G.I pipe. • Grill: 20mm ID B- Class G.I pipe. • Ladder: 25mm ID B- Class G.I pipe. • Step: 16-Gauge MS sheet. • Handle: 20mm ID B- class G.I • Pipe. (minimum 3 mm thick) Paint: Powder coating. Minimum gross weight:-217kg. |
| 31 | Rainbow climber. • Area: 2’X10’ft. • Safe Area: 7’X 15’ft. • Height: 6 ft. • Main pipe: 40mm ID B-class G.I pipe. • Ladder: 25mm I.D B- class G.I pipe. (minimum 3 mm thick) • Paint: Powder coating. Minimum gross weight:-56kg. |
| 32 | ABB CRUNCH OR SIT UP BENCH Unit dimension:24’’(H), 74’’(L), 20’’(W) Safe area:-8’X4’ Pipe size:-40mm & 25mm ID-B class GI pipe. Seat: - FRP. Colors:-Power coating. Nut &bolt: - S.S. Minimum Gross weight:-41kg. |
| 33 | KNEE/ HIP RAISE ON PARALLEL BAR Unit dimension:92’’(H), 46’’(L), 29’’(W) Safe area:-5’X4’ Pipe size:-75mm, 50mm, 32mm ID-B class GI pipe. Colors:-Power coating. Nut &bolt: - S.S. Minimum Gross weight:-86kg |
| 34 | BENCH WITH FIXED DUMBBELL Unit dimension:30’’(H), 112’’(L), 24’’(W) Safe area:-14’X4’ Pipe size:-50mm & 32mm ID-B class GI pipe. Seat: - FRP. Bearing :-NBC/SKF/FAG. Colors:-Power coating. Nut &bolt: - S.S. Minimum Gross weight:-92kg |
| 35 | BENCH WITH FIXED WEIGHT LIFT Unit dimension:56’’(H), 48’’(L), 24’’(W) Safe area:-8’X8’ Pipe size:-50mm, 40mm, 20mm ID-B class GI pipe. Seat: - 25mm X 50mm GI pipe. Colors:-Power coating. Nut &bolt: - S.S. Minimum Gross weight:-80kg |
| 36 | SHOULDER EXERCISER Unit Dimension: 72’’(H), 68’’(L),24’’(W) Safe Area : 12’X 10’ Pipe Size: 100mm ID B-class GI main pipe. Supporting pipe: 40mm ID B-class GI main pipe. Seat: plastic single step (plastic)-4nos. Bearing:-4nos. NBC/SKF/FAG. Colors : Powder coating. Nut & Bolts : S.S(3/8x1 ½’’ LN-2.5/16 Screw) Minimum gross weight:93kg 300Gm |
| 37 | TWISTER Unit dimension:48’’(H), 5’’(W) Safe area:-8’X8’ Pipe size:-100mm ID-B class GI pipe. Handel:-25mm ID-B class GI pipe. Seat: - FRP /Plastic- 3 nos. Bearing:-NBC/SKF/FAG. Colors:-Power coating. Nut &bolt: - S.S. Minimum Gross weight:-68kg |
| 38 | GLIDER OR SET BACK/LEG PRESS Unit Dimension: 72’’(H), 68’’(L),24’’(W) Safe Area : 12’X 10’ Pipe Size: 100mm ID B-class GI main pipe. Supporting pipe: 40mm ID B-class GI main pipe. Seat: plastic single step (plastic)-4nos. Bearing:-4nos. NBC/SKF/FAG. Colors : Powder coating. Nut & Bolts : S.S(3/8x1 ½’’ LN-2.5/16 Screw) Minimum Gross weight:-71kg |
| 39 | Air Swing Unit Dimension: 60” (H), 36” (L), 36” (W) Safe Area: 8’ X 8’ Pipe Size: 100 mm ID B-class GI main pipe Handel: 25 mm & 20 mm ID B-class GI pipe Seats: Double Step (Plastic)-2Nos Bearings: - 4 Nos. NBC/SKF/FAG Colors: Powder coating. Nut & Bolts: S.S (3/8x1 ½’’ LN-2.5/16 Screw) Minimum Gross Weight-82 kg |
| 40 | POLE WITH FIXED WEIGHT Unit Dimension: 81’’(H), 50’’(L), 48’’(W) Safe Area: 6’ X 4’ Pipe size: 75mm,50mm, & 20 mm ID B-class GI Pipe, Colors: powder coating Nut & Bolts: S.S Minimum Gross Weight-90 kg |
| 41 | WALKER Unit Dimension: 60” (H), 36” (L), 36” (W) Safe Area: 8’ X 8’ Pipe Size: 100 mm ID B-class GI main pipe Handel: 25 mm & 20 mm ID B-class GI pipe Seats: Double Step (Plastic)-2Nos Bearings: - 16 Nos. NBC/SKF/FAG Colors: Powder coating. Nut & Bolts: S.S (3/8x1 ½’’ LN-2.5/16 Screw) Minimum gross weight:85Kg 700Gm |
| 42 | PH Works: Supplying all materials, labour, tools and plant and drilling of a perfectly vertical bore hole of specified diameter for a specified depth below ground level through hard and boulder formation by means of Calix rigs as required to suit the site condition as per the direction of the Engineer in charge including deployment of rigs with its accessories, tools and plant and consumables etc for a finished bore suitable for lowering of 125mm x 100 mm nominal dia GI or PVC casing pipes fitted with socket and with or without well screen as per the necessary for soft and hard formations drilled by combination drilling method. |
| 43 | Supplying all labour, tools and plant and jointing materials and lowering the following size of G.I / PVC pipes with or without slotted pipes as per the necessity from ground level up to 30mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipes and supplying and fixing all jointing materials T&P etc complete and keeping the top of casing pipe threaded including plugging tubewells to prevent entry of foreign materials from above etc complete as per direction of engineer in charge. Lowering of 125 mm dia PVC casing pipe from 0 mtr to 50 mtr |
| 44 | Supplying all labour, tools and plant and materials for cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. |
| 45 | Supplying all materials, labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole including cost of cement etc. all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing etc as per the direction of Engineer-in-Charge. |
| 46 | Cost of materials125mm dia P.V.C pipe sch-80pipes conforming to ASTM -D 1785-89 |
| 47 | Supplying all materials, labour, T&P and providing sanitary sealing by cement concrete grouting of angular space around G.I/ PVC/ MS, housing pipe upto 5 mtr below ground level as per drawing to plug the bore holes excluding cost of cement all complete |
| 48 | Supply of 50mm dia HDPE pipe- PE -63 (8kg/cm2) |
| 49 | Stainless steel short piece with nut bolt |
| 50 | Usha Martin rope |
| 51 | Provision of Bore cap made out of M.S plate welded as per bore size and Nut bolt locking arrangement |
| 52 | Procurement of pump motor & PH fittingsSupply and installation of 1nos 1.5HP submersible pump set |
| 53 | Supply of 3 phase stater with single phase preventor for 5HP submersible motor with internal electrification (Provisional) |
| 54 | Supply of 4mm2 submersible flat cable (65+65+30+30) |
| 55 | Supplying all materials, labour, T&P and fixing of following P.H. fittings of approved make including supplying of all necessary jointing materials all complete as per approved specification and direction of Engineer-in-charge. 15mm dia. C.P. Angle stop cock.(Amber Delux) |
| 56 | 125mm dia CP grating |
| 57 | 15mm dia C.P. extension piece and flange |
| 58 | 22\\"x16\\" W.H.Basin with complete fittings (Parryware) |
| 59 | Standard Pedestal for Basin |
| 60 | 600mm x 450mm bevelled edge mirror |
| 61 | CP Glass shelf with glass |
| 62 | CP Towel ring |
| 63 | 25mm dia UPVC-ASTM Ball Valve with metal ball |
| 64 | 50mm dia UPVC-ASTM Ball Valve with metal ball |
| 65 | 25mm dia PTMT Ball cock with ball |
| 66 | 25 mm UPVC-ASTM Tank Nipple |
| 67 | 50 mm UPVC-ASTM Tank Nipple |
| 68 | 10 ltrs. Capacity P.V.C. Low level cistern with 32mm dia. PVC Long flush bend (Parryware slim line). |
| 69 | 23\\" EWC with 'S' trap including PVC Seat cover (Nycer / Parryware) |
| 70 | 15mm dia C.P. long body bib cock (Amber Delux) |
| 71 | 15mm dia. C.P. 2-in-1 bib cock.(Amber Delux) |
| 72 | CP Towel rail.(600x20)mm |
| 73 | 20mm dia. C.P concealed cock. (Amber Delux) |
| 74 | CP Soap holder |
| 75 | CP Health Foucet with 1.0 mtr PVC Tube |
| 76 | Supplying all materials, labour, T&P for fitting and fixing of 1000Ltrs capacity Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701--1996 over head water storage tank of Sintex make with tank cover including lock and key arrangement etc. all complete as per direction of Engineer-in-charge. 1000 Lt -3 Layer White IS-12701-1996 Sintex tank (ISI) |
| 77 | Cutting grooves in brick masonry wall / pucca floor for taking G.I. pipes and making good to the damages etc. all complete as per direction of Engineer-in-charge. |
| 78 | Supplying all materials, labour, T & P conveyances, fitting and fixing the following nominal bore G.I./PVC ASTM Pipe to walls / ceiling / floor with required G.I. Fittings including cutting the pipes and threading, making good the damage all complete as per direction of Engineer-in-charge. 25mm dia PVC ASTM Sch-80 pipe |
| 79 | 25mm dia MTA |
| 80 | 25mm dia FTA |
| 81 | 25 x15mm dia UPVC brass Elbow |
| 82 | 25mm UPVC socket |
| 83 | 25mm dia GI Union |
| 84 | 50mm dia UPVC pipe ASTM (Sch-80). |
| 85 | 50mm dia UPVC Tee. |
| 86 | 50mm dia UPVC brass MTA. |
| 87 | 50 x50 x25mm dia R/Tee |
| 88 | 50mm dia UPVC Elbow. |
| 89 | 50mm dia UPVC Socket |
| 90 | 50mm dia UPVC brass FTA. |
| 91 | 50mm dia UPVC Union |
| 92 | Supplying all materials,labour and T&P for cutting holes through existing flyash brick walls for taking G.I/PVC pipes and fittings including mending good to the damages all complete 250mm.to 375mm. thick wall |
| 93 | Supplying all materials,labour and T&P for cutting holes through existing flyash brick walls for taking sand cast iron pipes/ A.C. pipes and fittings including mending good to the damages all complete 250mm thick hole |
| 94 | Supply all materials, labour, T&P and laying of following dia. SWR pipes and fittings, jointing with C.M. (1:1) fixing to walls with nails, bobbins and wooden plugs etc. all complete as per direction of Engineer-in-charge. 110mm dia P.V.C. SWR S/S Pipe (ISI type-B) |
| 95 | 110mm dia PVC SWR door bend |
| 96 | 110mm dia. PVC SWR S/J with Door |
| 97 | 110mm dia. PVC SWR Plain Bend |
| 98 | 110mm dia. PVC SWR Pipe clip |
| 99 | 110mm dia. PVC SWR Cowl |
| 100 | 110mm dia. PVC SWR off set bend |
| 101 | Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 102 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and aound trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. |
| 103 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C |
| 104 | Signage: Providing fifting and fixing of shoulder mounted informatory Sign Board of size (1150 mm x 743mm) using upper high efficiency full cubic reflective sheeting type-XI DG3-ASTM on 4mm thick Aluminium Composit Panel (ACP) over which alphabets and numericals and reverse cut with computerised cut plotter on frame made out of 30x30x1.5mm square SS pipe main frmae, 25x5mm SS flat back suppoirt frame, 1 nos 80NB SS post with top cover including screws and revets as may be required. The frame will be fixed after necessary excavation, concrete and transportations to work site with loading and unloading and installation of the board digging 2 nos ( 450x450x800mm) foundation and trench and filling with M-15 grade concrete and compacting properly including all cost, conveyance, taxes, royality etc. complete as directed by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
TodayOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender