Tender For Providing High Mast Solar Light At Muthupatti Nh45 B Junction In Athikaram Panchayat In Marungapuri Panchayat Union
Tender Value
6.50 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
13 days left
EMD
6500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing High Mast Solar Light At Muthupatti Nh45 B Junction In Athikaram Panchayat In Marungapuri Panchayat Union
BOQ
| Sl. No. | Item Description |
| 1 | Providing High Mast Solar Light at Muthupatti NH45 B Junction in Athikaram Panchayat.General features(High mast lightning octagonal tower with solar LED street light with component octagonal pole LED street light room luminaire solar PV model battery based plate mppt maximum PowerPoint tracking charge controller in built dc-dc type driver and acting terminal)Hight of octagonal pole in meter (11meter) Number of LEDstreet light luminaire for each octagonal pole(6) Material of octagonal pole(high tensile steel) Thicknees of octagonal pole sheetin mm(4millimeter) internal distance between parallelfaces at the base of pole in mm(105millimeter) Internal distance between parallel(65millimeter)Internal distance between parallel faces at the top of pole in mm(65millimeter) Number of section(1) Minimum designed life of the pole in year (25year) Regional wind withstand capacity in m/s(44) CONTROLLER Solar charge controller capacitycurrent in ampere(12AMP) BATTERY Type of battery(lithiuit) Battery voltagein volts(12volt) Battery capacityin ah (42) Number of batteries for rach pv module (1) Charging time in day(1) charge controller efficiency(90%) Solar charge controller capacitor voltage in volt(5volt) SOLAR PV MODULE Number of solar panel pv module for each octagonal pole in nos(1) Type of solar module ( crystalline silicon terrestried photovoltaic pv modules) Power output of solar pv model in wp(150) Solar panelefficiency(>14%) BASE PLATE Material of base plate (mild steel) Lengthof base plate in mm (250millimeter) Thickness of the base plate in mm (12millimeter) Standard accessories for each pole (foundation bolts,nuts,washers) Number of bolts for each pole (1) LED luminaire LED rating /system wattage/rated power in watt(80) Lamp efficacy in lumen/watt (2100) LED colour temperature hint cool white/daylight 5000k-6500k (5000) Colour rendering index CRI (270) Total hormonic distortion THD (<10%) Material of housing (high) Beam angle in degree (100) Ingress protection (ip65) Operating temperature range lower limit(10c) Operating temperature range upper limit (45c) Minimum surge withstand voldage in kv(6) PIR Passive infrared sensor (yes) Flickering free (yes) |
| 2 | Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary etc complete complying with standard specification etc., complete |
| 3 | Supplying and Filling foundation and basement with filling M-sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification. |
| 4 | Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed for foundation |
| 5 | Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X all etc., complete (Below Ground Level) |
| 6 | Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete |
| 7 | Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete |
| 8 | Provision for Name Board Charges |
| 9 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender