Tender For Repair To Roof Treatment, Chajja/Mumty, Plastering And Connected Work In The Major Units In The Aor Of Age B/R Iii At Chandimandir Mil Stn
Tender Value
49 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
2 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Roof Treatment, Chajja/Mumty, Plastering And Connected Work In The Major Units In The Aor Of Age B/R Iii At Chandimandir Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Oct-2026 | Revised BoQ | BOQ | 30-Oct-2026 |
| 2 | 17-Oct-2026 | Revised Page | Other | 30-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Hollow PVC wall lining, with necessary screws and drilling, PVC panel 0.5mm thick each flap and both flap connected with ribs and overall thickness not less than 5mm design printed in 300 to 450mm wide pannels fixed as in repair complete all as specified and as directed |
| 2 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99% NRO .05 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476 (part4)- 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides ) comprising of main- T runners of size 15 x32 mm of length 3000mm, cross-T of sixe 15 x 32 mm of length1200mm and secondary intermediate Cross-T of size 15 x 32mm of length 600mm to from grid module of size 600 x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engineer-in-Charge, including dismantling of existing false ceiling complete all as specified and directed. |
| 3 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviveable tiles to store and rubbish off the premises complete all as specified and directed |
| 4 | Glazed ceramic coloured printed tiles in vertica surfaces of size 300 x 450 x 7mm set and jointed in neat cement slurry over and including 10mm thick rendering in CM 1:4 for receiving the tiles complete all as specified. |
| 5 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 6 | Coloured vitrified ceramic tiles 8-10mm thick (square / rectangular) polished, area of each tiles exc 0.18 sqm but n.exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 7 | All as per serial item No 06 herein before but in skirting including ncessary cutting as directed etc over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 8 | Vitrified ceramic tiles 10mm thick (square / rectangular) polished, light shade, area of each tiles exc 0.42 sqm but n.exc 1.00 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 (tiles shall be fixed with 3mm wide spacer and filled with grout of selective shade), complete all as specified and directed |
| 9 | All as per serial item No 8 herein before but in skirting including ncessary cutting as directed etc over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 10 | Kota Stone Slab flooring, minimum size 550 x 550mm, 18 to 20mm thick, best quality over and including cement screed bed 20mm thick in cement mortar 1:4, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, inclduing rubbing polishing with and including dismantling of existing stone complete all as specified and directed. |
| 11 | Granite stone slabs, 16 to 18mm thick, width and length as per site requirement, best quality machine cut and polished to be fixed in floors,cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of outer edges and corners where directed with and including 20 mm thick screed bed in cement mortar 1:6 including dismantling of existing damaged slab complete all as specified and directed. |
| 12 | Factory made rubber moulded machine pressed coloured chequered cement concrete tiles 250mm x 250mm x 22mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 13 | Factory Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement and no pigment, laid over 25mm thick fine sand cushioning and joints filled with fine sand complete all as specified and directed. |
| 14 | Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed. |
| 15 | Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar, demolition of mud phuska of any thickness including removal of rubbish from site complete all as specified & directed. |
| 16 | PCC 1:3:6 type C-2 (20 mm graded stone aggs) as in roof padding, roof kerbs rounded or chamfered on edges, complete all as specified and directed. |
| 17 | 20mm thick rendering in Cement and Sand mortar 1:4 over roof slab and sunken portion finished even and fair mixed with water proofing compound, complete all as specified. (NOTE : WPC will be measrued and paid separately) |
| 18 | Supply only integral water proofing compound (ISI Marked) complete all as specified & directed. |
| 19 | 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid over a coat of oil bound bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc having 75mm side lap joint and 100m end lap joint after preparing the surface as per standard practice and as per manufacturer instructions and finished complete all as specified & directed. |
| 20 | Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 21 | 40mm thick brick tiles with including 20mm thick cement mortar 1:4 jointed grouted and pointed complete mixed with crude oil 5% by weight of cement complete all as specified and directed. |
| 22 | Demolition of brickwork or stone/boulder masonry built in lime/cement mortar including all quoins, aches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 23 | Brick work with sub class ‘B’ bricks of old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 24 | All as per serial item No 23 herein before but except bricks (using old serviceable bricks obtained ) complete all as specified and directed. |
| 25 | Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed. |
| 26 | Rendering 15mm thick on brick masonary in cement mortar (1:4), finishing surfaces even and smooth without using extra cement, complete all as specified and as directed. |
| 27 | Rendering 15mm thick on brick masonary in cement mortar (1:4), finishing surfaces even and smooth without using extra cement, complete all as specified and as directed. |
| 28 | 10mm thick rendering in Cement and Sand mortar 1:6 over concrete /brick surfaces finished even and smooth without using extra cement, complete all as specified & directed. |
| 29 | 10mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling finished even and smooth without using extra cement including taking down old cement plaster complete all as specified and directed |
| 30 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint (any colour) including all necessary scaffolding and safety arrangements, complete all as specified and directed. |
| 31 | Preparation of new surfaces of any description of wall, facia, ceiling, RCC etc and applying two coats of oil bound destemper over one coat of interior wall primer including wall care putty (average thickness 1.5 to 2.5mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed. |
| 32 | Preparation of new plastered surface and apply three coats of white wash on ceiling surfaces complete all as specified and directed |
| 33 | Demolition of plain cement concrete (unreinforced) of any description and in any position complete all as specified and directed. |
| 34 | 100mm thick plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified & directed. |
| 35 | 15 mm dia medium grade GI tubing with all fittings to walls and ceilings or laid under floors, including taking down old tubing pipe complete all as specified and directed. |
| 36 | 20 mm dia medium grade GI tubing with all fittings to walls and ceilings or laid under floors, including taking down old tubing pipe complete all as specified and directed. |
| 37 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) for concealed pipe etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge. |
| 38 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm bore PTMT, all as specified in SSR Part-I, fixed as in repair and all as directed by Engineer-in-charge. |
| 39 | 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repair complete all as specified and directed. |
| 40 | 2000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repair complete all as specified and directed. |
| 41 | Vitreous China Wash down water closet (pedestal pattern) 'P' or 'S' trap white, (excluding, flushing cistern and flush pipe) with and including seat cover & flush pipe fixed to wall and on floor fixed as in repair complete all as specified and directed. |
| 42 | Vitreous china squatting pan \\"orissa\\" pattern, size 580 x 440 mm white, with integral foot rest including 'P' or 'S' trap (excluding flushing cistern and flush pipe) and making good to the floor fixed as in repair complete all as specified & directed by Engineer-in-charge. |
| 43 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes, set with concrete and making good to floor, fixed in repair complete all as specified & directed. |
| 44 | Vitreous china wash hand basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand, fixed as in repair complete all as specified and directed. |
| 45 | Vitreous China half stall urinal, fixed against wall in cement mortar (1:2), securing urinal with and including 60mm long brass screws, pointing around urinal back in cement, including CP waste coupling, 32mm PVC waste pipe, fixed in repairs,complete all as specified and directed. |
| 46 | PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed. |
| 47 | 110 mm bore PVC (SWR) bends of any radius, fixed as in repair complete all as specified and directed. |
| 48 | PVC (SWR) pipe 75mm bore of pressure rating 6 kg/cm2 single socketed in any length with rubber ring joints, laid in trenches or in flors, fixed as in repair complete all as specified and directed. |
| 49 | 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 50 | PVC (SWR) gully trap 750/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 51 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore complete all as specified. |
| 52 | Bib taps brass, fancy type, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed. |
| 53 | 15mm bore pillar tap, with quarter turn, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair, complete all as specified and directed. |
| 54 | Brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed with 450mm long copper pipes incl all cecessary fitting suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 55 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 56 | Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed |
| 57 | Applying wall care putty in existing plastered old decorated surfaces of bldg (average thickness 2mm for desired smoothness and leveling of surfaces in two or more layers) by using sand papering to make surface smooth and ready to receiving interior finish including necessary scaffolding and safety arrangements and applying two coats of oil bound distemper over one coat of interior wall primer (all as per manufactures instructions) complete all as specified and directed. |
| 58 | Preparation of old surfaces of walls and applying two coats of cement base paint, up to height of 04 storey building including necessary scaffolding and safety arrangements etc complete all as specified and directed |
| 59 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre. of required shade and colour complete as per manufacturer's specification, Two or more coats on wall (smart periodical) complete all as specified and directed. |
| 60 | Finishing walls with Acrylic Smooth exterior paint of required shade, on new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (smart periodical) complete all as specified and directed. |
| 61 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. |
| 62 | High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, Suspended ceilings or in floors etc, 100/110mm bore, single socketed in any length, pipe should be fixed atleast 100 mm away from wall, fixed to walls with MS/GI clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed in repair complete all as specified and directed. |
| 63 | 100/110 mm bore High density polyethylene (HDPE) of pressure rating 6kgf/cm2) bends of any radius fixed as in repair complete all as specified and directed. |
| 64 | High density polyethylene (HDPE) of pressure rating 6kgf/cm2) junction (single T) equal or unequal for 100 mm bore pipes, fixed as in repair complete all as specified and directed. |
| 65 | Stack clamps for 75mm bore pipe, made out of 30mm x 5mm size, flat iron round stays, including screws/ Nails and securing ends of stays to wall or roof, fixed as in repair complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 17, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 days
Oct 30, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender