Tender For Repair/Maint Of Certain Wooden/ Steel Furniture Including Painting, Polshing And Canning At Military Stn Lekhapani Under Ge Dinjan No 2
Tender Value
11.99 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
14 days left
EMD
24000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Certain Wooden/ Steel Furniture Including Painting, Polshing And Canning At Military Stn Lekhapani Under Ge Dinjan No 2
BOQ
| Sl. No. | Item Description |
| 1 | TABLE DINING 6 PERS |
| 2 | (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed.Drawing No-FD-273, FD-239, FD-30M, FD/MAP-II/03 |
| 3 | (b) Replacement of unsv table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed.Drawing No-FD-273, FD-239, FD-30M, FD/MAP-II/03 |
| 4 | (c) Replacement of unsv long rails made of 2nd class hard wood without damaging adjacent parts as per drawing complete all as specified and as directed.Drawing No-FD-273, FD-239, FD-30M, FD/MAP-II/03 |
| 5 | (d) Replacement of unsv short rails made of 2nd class hard wood without damaging adjacent parts as per drawing complete all as specified and as directedDrawing No-FD-273, FD-239, FD-30M, FD/MAP-II/03. |
| 6 | BED HARD STEEL OFFICER:- |
| 7 | (a) Removing unserviceable plywood top and supply & fixing 6'x3'x12mm commercial BWR plywood complete all as per drawing and as directed.Drawing No-FD/E6/MAP/08R |
| 8 | (b) Replacement of unsv 18mm pre laminated particle board old unserviceable foot board of \\"Bed hard steel \\", complete all as specified and directed.Drawing No-FD-246/247 |
| 9 | (c) Replacement of unsv 18mm pre laminated particle board old unserviceable head board of \\"Bed hard steel \\", complete all as specified and directed.Drawing No-FD-246/247 |
| 10 | TABLE COMPUTER |
| 11 | (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed.Drawing No-FD/E6/MAP/03 |
| 12 | (b) Replacement of unserviceable key board tray with telescopic chanel as per drawing complete all as specified and as directed.Drawing No-FD/E6/MAP/03 |
| 13 | (c) Replacement of unsv drawer made of 18mm thick particle board as per drawing complete all as specified and as directed.Drawing No-FD/E6/MAP/03 |
| 14 | (d) Replacement of unserviceable Table bottom 18 mm thick particle board with PVC beading 18x1.8mm all around the top complete all as specified and as directed.Drawing No-FD/E6/MAP/03 |
| 15 | (e) Replacement of unserviceable particle board self of 450mm x 250mm with PVC beading 18x1.8mm all around the top complete all as specified and as directed.Drawing No-FD/E6/MAP/03 |
| 16 | (f) S & F of bottom rubber shoe for table leg all as per drawing and as directed.Drawing No-FD/E6/MAP/03 |
| 17 | (g) Replacement of unsrerviceable knob and handle of dwarer as per drawing and as directed Drawing No-FD/E6/MAP/03 |
| 18 | BED PLYWOOD TOP :- |
| 19 | (a) S & F of new head board made out of hard wood frame covered with 4mm thick (3ply) ply wood, teak face on one side & commercial other side, BWR grade by replacing old unserviceable head board of \\"Bed ply wood top\\" complete all as specified and directed.Drawing No-FD-246/247 |
| 20 | (b) S & F of new foot board made out of hard wood frame covered with 4mm thick (3ply) ply wood, teak face on one side & commercial other side, BWR grade by replacing of old unserviceable foot board of \\"Bed ply wood top\\", complete all as specified and directed.Drawing No-FD-246/247 |
| 21 | (c) Replacement of unsv long rail of bed plywood top made out of 2nd class hard wood and complete all as per drawing and as directed.Drawing No-FD-246/247 |
| 22 | (d) Replacement of unsv short rail of bed plywood top made out of 2nd class hard wood and completed all as per drawing and as directed Drawing No-FD-246/247 |
| 23 | (e) Replacement of unsv leg made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. Drawing No-FD-246/247 |
| 24 | (f) Removing unserviceable plywood top and supply & fixing 6'x3'x12mm commercial BWR plywood complete all as per drawing and as directed.Drawing No-FD-246/247 |
| 25 | SOFA SET 5 SEATER |
| 26 | (a) Replacement of old u/s /unhygienic cushion of size 560x530mm with 100mm thick 32 density cushion, Make as approved. The best quality tapstry cloth cover duly stiched with provision of velcro to be provided to the cushion all around as approved and as directed. Drawing No-FD-281 |
| 27 | (b) Repair to sofa chair for replacing unserviceable plywood seat complete all as specified and as directed.Drawing No-FD-281 |
| 28 | (c) Repair to sofa chair for replacing unserviceable leg made of 2nd class hard wood for sofa with arm complete all as specified and as directed.Drawing No-FD-258,FD-281 |
| 29 | (d) Repair to sofa chair for replacing unserviceable back stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed.Drawing No-FD-258,FD-281 |
| 30 | (e) Repair to sofa chair for replacing unserviceable side stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed.Drawing No-FD-258,FD-281 |
| 31 | (f) Repair to sofa chair for replacing unserviceable arms rest made from 2nd class hard wood for sofa with arm complete all as specified and as directed.Drawing No-FD-258,FD-281 |
| 32 | SOFA SET 4 SEATER |
| 33 | (a) Repair to sofa chair for replacing unserviceable plywood seat complete all as specified and as directed.Drawing No-FD-258,FD-281 |
| 34 | (b) Repair to sofa chair for replacing unserviceable leg made of 2nd class hard wood for sofa with arm complete all as specified and as directed.Drawing No-FD-258,FD-281 |
| 35 | (c) Repair to sofa chair for replacing unserviceable back stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed.Drawing No-FD-258,FD-281 |
| 36 | (d) Repair to sofa chair for replacing unserviceable side stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed.Drawing No-FD-258,FD-281 |
| 37 | (e) Repair to sofa chair for replacing unserviceable arms rest made from 2nd class hard wood for sofa with arm complete all as specified and as directed.Drawing No-FD-258,FD-281 |
| 38 | PEG TABLE :- |
| 39 | (a) Replacement of unserviceable table top made of 18mm thick particle board of size 450x300mm one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed.Drawing No-FD-277 |
| 40 | (b) Replacement of unsv leg made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. Drawing No-FD-277 |
| 41 | (c) Replacement of unsv top rail made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. Drawing No-FD-277 |
| 42 | (d) Replacement of unsv bottom rail made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. Drawing No-FD-277 |
| 43 | TABLE WRITING /WRITING MED |
| 44 | (a) Replacement of unserviceable Table top made of 18 mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed.Drawing No-FD-275 & DB-3782 |
| 45 | (b) Replacement of unsv table leg made of 2nd class hard wood all as per drawing complete all as specified and as directed.Drawing No-FD-275 & DB-3782 |
| 46 | (c) Replacement of unsv drawer side made of 12mm thick Plywood, BWR grade and 6mm plywood of the bottom all as per drawing complete all as specified and as directed.Drawing No-FD-275 & DB-3782 |
| 47 | (d) Replacement of unsv shutter made of 18mm thick particle board, Exterior grade as per drawing complete all as specified and as directed.Drawing No-FD-275 & DB-3782 |
| 48 | (e) Replacement of unsv stiffiner made of 2nd class hard wood all as per drawing complete all as specified and as directed.Drawing No-FD-275 & DB-3782 |
| 49 | TEAPOY WOODEN :- |
| 50 | (a) Replacement of unserviceable top made of 18mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed.Drawing No-FD-278 |
| 51 | (b) Replacement of unsv leg made of 2nd class hard wood all without damaging the adjacent parts as per drawing complete all as specified and as directed. Drawing No-FD-278 |
| 52 | (c) Replacement of unsv top rail made of 2nd class hard wood all without damaging the adjacent parts as per drawing complete all as specified and as directed. Drawing No-FD-278 |
| 53 | (d) Replacement of unsv bottom rail made of 2nd class hard wood all without damaging the adjacent parts as per drawing complete all as specified and as directed.Drawing No-FD-278 |
| 54 | TABLE DRESSING LADIES :- |
| 55 | (a) S & F of looking mirror of size 1220x380x5mm Make- Modiguard including taking down unserviceable timber beading shall be provided all around the edge of the mirror including fixing of ply wood 6mm BWR on the back side of mirror and shall be attached to wooden frame as shown in the drawing complete all as specified and as directed. Drawing No-FD-251 |
| 56 | (b) Replacement of unsv back of table dressing ladies made of 6 mm BWR plywood complete all as specified and as directed.Drawing No-FD-251 |
| 57 | (c) Replacement of unsv drawer made of 18mm thick particle board as per drawing complete all as specified and as directed.Drawing No-FD-251 |
| 58 | (d) Replacement of unserviceable chromium plated knob as per drawing complete all as specified and as directed.Drawing No-FD-251 |
| 59 | (e) Replacement of unserviceable glass shutter with alluminium chanel as per drawing complete all as specified and as directed.Drawing No-FD-251 |
| 60 | (f) Replacement of unserviceable leg of made out 2nd class hard wood all as per drawing complete all as specified and as directed.Drawing No-FD-251 |
| 61 | TABLE 3’X2’ WITH/ WITHOUT DRAWER (900X600X760MM) Drawing No- FD-284 |
| 62 | (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top as per drawing complete all as specified and as directed. |
| 63 | (b) Replacement of unsv table leg made of 2nd class hard wood all as per drawing complete all as specified and as directed. |
| 64 | (c) Replacement of unsv side stiffiner made of 2nd class hard wood all as per drawing complete all as specified and as directed. |
| 65 | (d) Replacement of unsv bottom rail made of 2nd class hard wood all as per drawing complete all as specified and as directed. |
| 66 | (E) Replacement of unsv drawer made of 12mm thick BWR plywood all as per drawing complete all as specified and as directed. |
| 67 | TABLE BED SIDEDrawing No.-FD- 210/248/276/28-M |
| 68 | (a) Replacement of unserviceable top made of 18 mm thick particle board,Exterior grade one side teak veneer finish beaded with 4mm thick timber all around the top complete all as specified and as diercetd. |
| 69 | (b) Replacement of unsv table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. |
| 70 | (c) Replacement of unsv shelves by fixing 12mm thick BWR plywood as per drawing complete all as specified and as directed. |
| 71 | TABLE CENTRE Drawing No. (FD-274) |
| 72 | (a) Replacement of unserviceable Table top made of 18 mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. |
| 73 | (b) Replacement of unsv table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. |
| 74 | (c) Replacement of unsv side stiffiner made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. |
| 75 | (d) Replacement of unsv long rail made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed |
| 76 | (e) Replacement of unsv short rail made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed |
| 77 | TABLE DINING 4 PERSDrawing-FD/MAP-II/03 |
| 78 | (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. |
| 79 | (b) Replacement of unsv table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. |
| 80 | (c) Replacement ofunsv rails made of 2nd class hard wood timber hollock rest all without damaging adjacent parts as per drawing complete all as specified and as directed. |
| 81 | CHARPOY GI PIPE WITH NYLON NEWAR :-FD-220 |
| 82 | (a) Taking out old warn out unserviceable newar from existing charpoy GI and tightning of Charpoy GI with pipe wrench and S&F Plywood 12mm , commercial ply, BWR grade as per IS 303 of size 1980x950mm. Plywood shall be fixed over three nos stiffeners of 25mmx25mm x16 gauge MS tube welded parallel to the short rails in equal distance. 8mm dia round head countershank bolts and nuts with washer shall be used by drilling 2 holes on each stiffernes complete all as specifed and as directed |
| 83 | (b) Dismantling old broken/unserviceable long rail and S&F 32mm bore GI pipe medium grade, ISI marked as new long rail for GI Charpoy as per FD-220 including threading at both ends and provision of two check neuts of 6mm thick suitable for 32mm bore pipe complete all as specified and as directed.(Note : Each long rail shall be measured separately) |
| 84 | (c ) Dismantling old broken/unserviceable short rail and replacing the same by using the GI Pipe obtained under dismantling of long rails by cutting into required size including threading at both ends for GI charpoy as per FD-220 complete all as specified and as directed.(Note : Each short rail shall be measured separately) |
| 85 | (d) Dismantling old broken/unserviceable legs and replacing the same by using the GI Pipe obtained under dismantling of short rails by cutting into required size including threading at one end for GI charpoy as per FD-220 complete all as specified and as directed.(Note : Each leg shall be measured separately) |
| 86 | TABLE DINING 8 PERSDrawing No FD-273, FD-239,FD-1376 |
| 87 | (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. |
| 88 | (b) Replacement of unsv table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. |
| 89 | (c) Replacement of unsv long rails made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. |
| 90 | (d) Replacement of unsv short rails made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. |
| 91 | CHARPOY HARD TOP STEELFD/MAP-II/01 |
| 92 | (a) Taking out old warn out unserviceable Plywood from existing charpoy steel and S&F Plywood 12mm , commercial ply, BWR grade as per IS 303 including black colour painting to all expoposed steel surface of charpoy with spary machine. Plywood shall be fixed over the cleats with nuts and botls with washer complete all as specified in drawing and as directed |
| 93 | TEAPOY VERANDAH :Drawing No-FD-255 |
| 94 | (a) Replacement of unserviceable top made of 18mm thick particle board of size 600X450mm with white finish beaded with PVC beading 18x1.8 mm all around the top complete all as specified and as directed. |
| 95 | (b) Removing of all dust and dirt/old paint etc by Paint Remover/Scraper, etc. from completer frame of Teapoy Varanda and prepare it painting and applying Two Coats of Synthetic Enamelled White Paint to complete Frame all as specified and as directed.. |
| 96 | (c) Provn of welding to the broken Joints/Parts of TEAPOY VERANDAH upto 4-6 joints including providing MS conduit pipe 19/20mm, 16 Gauge (upto the required length approx 610mm long to Each Chair duly fabricated) for replacing broken Parts and to complete the existing Chair Frame including its smoothening for repainting / recanning, complete all as shown in Drawing/as specified and as directed. |
| 97 | CHAIR VERANDAH Drawing No-FD-256 |
| 98 | (a) Removing of all dust and dirt/old paint etc by Paint Remover/Scraper, etc. from completer frame of Chair Varanda and prepare it painting and applying Two Coats of Synthetic Enamelled White Paint to complete Frame all specified and as directed. |
| 99 | (b) Provn of welding to the broken Joints/Parts of CHAIR VERANDAH upto 4-6 joints including providing MS Conduit piper 19/20mm ,16 Gauge (upto the required length approx 450mm long to each chair duly fabricated) for replacing broken parts and to complete the existing Chair Frame including its smoothening for repainting / recanning, complete all as shown in Drawing/as specified and as directed. |
| 100 | (c) Recanning of CHAIR VERANDAH closely with nylone newar 55mm wide, after removal of existing old unsv newar and including providing one coat of synthetic enamelled white paint to the existing Frame of CHAIR VERANDAH , complete all as shown in Drawing/as specified and as directed. |
| 101 | Taking out the existing old unserviceable wooden components without damaging adjacent part and S & F new wooden components made of 2nd class hard wood and complete as specified in drawing and as directed :- |
| 102 | CHAIR DINING OFFICERSDrawing No. FD/MAP-II/04 |
| 103 | Removal of old unserviceable cushioned seat and M & L for fixing of new cushion seat with foam 75mm thick , 40 density over 12mm ply board without damaging adjacent part as per drawing and complete all as specified and as directed. |
| 104 | (a) Front Leg |
| 105 | (ii) Rear Leg |
| 106 | (iv) Stiffner |
| 107 | RECANNING OF CHAIRS |
| 108 | Removal of unserviceable plastic cane from chairs and M&L for recanning of plastic cane half round type 2.0 to 2.5mm wide and border with 3.0 to 3.5mm plastic cane as approved in Godrej pattern all as specified and as shown in drawing/as directed. |
| 109 | Description all as per item No 108 here in before but of Chair Dining Drawing No-FD-228, FD-279 |
| 110 | (ii) Description all as per item No 108 here in before but of Chair Writing FD-250, FD-280 |
| 111 | (iii) Description all as per item No 108 here in before but of Chair EasyFD-17,FD-229 |
| 112 | Preparation of following wooden furniture surfacess by applying one filler coat of Multani mitti, smoothing, rubbing with sand paper and polishing with two coats of french/sprit polish on exposed surface to achieve high glossy finish, complete all as directed by Engineer-in-charge. |
| 113 | (a) Description all as per item No 112 here in before but of Bed Hard Ply TopDrawing No.FD-246,247 |
| 114 | (b) Description all as per item No 112 here in before but of Table Dinning 6 PersFD-239/273/30-M,FD/MAP-II/03 |
| 115 | (c) Description all as per item No 112 here in before but of Table Dinning 8 PersFD-239/273/1376 |
| 116 | (d) Description all as per item No 112 here in before but of Table dining 4 persFD/MAP-II/03 |
| 117 | (e) Description all as per item No 112 here in before but of Hat stand with mirror.FD-206/233/361 |
| 118 | (f) Description all as per item No 112 here in before but of Chair easyFD-229/281,17(M) |
| 119 | (g) Description all as per item No 112 here in before but of Chair writingFD-250/280 |
| 120 | (h) Description all as per item No 112 here in before but of Chair diningFD-228/279 |
| 121 | (j) Description all as per item No 112 here in before but of Table bed sideFD-210/276/248//28-M |
| 122 | (k) Description all as per item No 112 here in before but of Table Peg.FD-236/277 |
| 123 | (l) Description all as per item No 112 here in before but of Table writing writing/Table writing mediumFD-249/275, DB3782 |
| 124 | (m) Description all as per item No 112 here in before but of Table CentreFD-235/274 |
| 125 | (n) Description all as per item No 112 here in before but of Teapoy woodenFD-232/278 |
| 126 | (o) Description all as per item No 112 here in before but of Table dressing ladies with mirrorFD-378/251 |
| 127 | (p) Description all as per item No 112 here in before but of Table dressing gents with mirrorFD-379/230 |
| 128 | (q) Description all as per item No 112 here in before but of Table 3' x 2' without Drawer.FD-231/284 |
| 129 | (r) Description all as per item No 112 here in before but of Sofa Set 4 seater with cushion (Map)FD-281/258 |
| 130 | (s) Description all as per item No 112 here in before but of Sofa Set 5 seater with cushion FD-281/258 |
| 131 | (t) Description all as per item No 112 here in before but of Side board FD-241 /371 /372 |
| 132 | (u) Description all as per item No 112 here in before but of Table 2'x2'x760mmFD-293 |
| 133 | Preparation of surfaces of following steel fur by filliing all holes and cracks or detoriated spots of old painted steel furnitureby applying oil putty and rubbing to make up smooth finished surfaces of both internally and exernally and applying two coats of synthetic enameled paint by spray comlete all as specified and directed by Engineer-in-Charge. |
| 134 | (a) Description all as per item No 133 here in before but of Almirah steel large/ Almirah 1/2h 1/2S steelFD-1031, 67(m) |
| 135 | (b) Description all as per item No 133 here in before but of Almirah steel med FD-1032/67 |
| 136 | (c) Description all as per item No 133 here in before but of Table office clerk steel FD-84/1004 |
| 137 | (d) Description all as per item No 133 here in before but of Table Office Officer steelFD-84/1003 |
| 138 | (e) Description all as per item No 133 here in before but of Locker bed side steel FD-257/1029 / TD/SZ/497 |
| 139 | (f) Description all as per item No 133 here in before but of Table ComputerFD/E6/MAP/03 |
| 140 | (g) Description all as per item No 133 here in before but of Bed Hard SteelFD/E6/MAP/08R |
| 141 | (h) Description all as per item No 133 here in before but of Table Steel 3'x3'FD-1009 |
| 142 | Supply and fix of lock as existing shape and size of brass bright finish with key in duplicate and key holes protector with lid for each lock to including removing the old unserviceable locks complete for Almirah large steel with 1/2 H , 1/2S all as per Drg FD-1033 |
| 143 | Description all as per item No 142 here in before but ofalmirah large steel with shelves as per Drg FD-1031 |
| 144 | Description all as per item No 142 here in before but almirah med steel with shelves as per DrgFD-1032 |
| 145 | Description all as per item No 142 here in before but almirah small steel 1/2H, 1/2S as per Drg FD-1034 |
| 146 | Description all as per item No 142 here in before but Book case open large steel FD-1028 |
| 147 | Description all as per item No 142 here in before but almirah Table office offrs/Clerk steel all as per drg FD-FD-1002/FD-1003/FD-1004 |
| 148 | Supply and fix chromium plateed steel handles of approved quality suitable shape & size for almirah large steel all as per drg FD-1032 |
| 149 | Description all as per item No 148 here in before but almirah steel med all as per drg FD-1032 |
| 150 | Supply and fix handle stainless steel / MS anodised 100mm long ''C\\" type for locker steel after dismantling old unserviceable handles all as specified and directed Drawing No FD-1029 |
| 151 | Supply and fix GI clamps suitable for fixing shelves of lockers steel, Almirah Med and Almirah large, fixe with machine screws all as specified and directedDrawing No. FD-1029/FD-1031/FD-1032 |
| 152 | M/L for removing of unserviceable back of table bedside MAP and supply and fix new back suitable for the existing table bedside made of 6mm thick plywood all as per drg FD/E6/MAP/15( R) |
| 153 | Description all as per item No 152 here in before but Top of Table Bedside all as per Drg FD/E6/MAP/15( R) |
| 154 | Description all as per item No 152 here in before but Side of Table Bedside all as per Drg FD/E6/MAP/15( R) |
| 155 | M/L for removing of unserviceable drawer of table bedside MAP and supply and fix new Drawer suitable for the existing table bedside all as per drg FD/E6/MAP/15( R) |
| 156 | Supply and fix new steel handles suitable for the existing table bedside MAP and all as per drg FD/E6/MAP/15( R) |
| 157 | Removing the existing worn/torn out Faded tapsetry cloth/Rexine providing as per required New tapsetry cloth/Rexine for seat / back of chair writing MAP, Visitors Chairs, Computer chair and variou type of revolving chairs complete.Drawing No FD/MAP/E6/12 or FD/MAP/E6/03 or TP |
| 158 | Removing the existing damaged/ unserviceable gas lift of chair computer, chair executive and different types of revolving chairs and providing new gas lift and make good centre pivot mechanism of revolving chair computer chairs etc including tilt tension adjustment complete all as per Drg FD/MAP/E6/03 or TP |
| 159 | Removing the existing damaged castor wheels of various type of revolving chairs/ computer chair / table computer of any description and providing as required new castor wheel of suitable design and as specified and directed.FD/MAP/E6/03 or TP |
| 160 | Removing the existing damaged hand rest of various type of revolving chairs/computer chair / chair writing or visitor chair and providing as per exisitng shape & size new hand rest of suitable design and as specified and directed.FE/MAP/E6/03, FD/E6/MAP/12 or TP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender