Tender For Repairs To Water Supply Pipes & Plumbing Fittings, Sanitary Pipes & Fittings Including Over Head Cleaning In Nhl/Ohl Complex Under Ge (East) Mathura
Tender Value
45 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
10 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Water Supply Pipes & Plumbing Fittings, Sanitary Pipes & Fittings Including Over Head Cleaning In Nhl/Ohl Complex Under Ge (East) Mathura
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for 10mm thick rendering in CM 1:4 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed. |
| 3 | M&L for 15mm thick rendering in CM 1:4 on any faces of brick or concrete surfaces of walls with water proofing compound as per manufacturer's instruction & finishing the surface even and fair complete all as specified and directed. Note - Water proofing compound shall be measured and paid separately. |
| 4 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 5 | M & L for rendering 5mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | M & L for prepariation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resitant primer over a coat of 1 to 2mm thick wall care putty on surfaces of walls any colour as approved by GE. |
| 7 | M&L for applying three coats of white wash on ceiling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 9 | M&L for non skid coloured ceramic tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exc. 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed. (bed room and other room floor) |
| 10 | M & L Virified Ceramic tiles light shade 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed. |
| 11 | All as per Item No 10 but as in dado/skirting including 10mm thick backing coat in CM 1:4, complete all as specified and as directed. |
| 12 | M&L for coloured glazed ceramic tiles in vertical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick backing coat in CM 1:4 on brick wall complete all as specified and as directed . |
| 13 | M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm screed bedding in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 14 | M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar etc jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed. |
| 15 | Demolition of brick work or stone/boulder masonry/block masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 16 | M&L for brick work with burnt bricks with sub class B bricks straight or curved on plan exc 6m mean radius in cement mortar 1:6. |
| 17 | S&F of 15mm bore fancy type chromium plated pillar taps, screwed down high pressure with long screwed sharks and fly nuts screwed down for iron pipes etc fixed as in repair complete all as specified and directed. |
| 18 | S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm incl waste pipe chain plug brackets complete all as specified and directed. . |
| 19 | S&F in repair of PVC 32mm bore waste coupling, brass chromium plated for glazed ware sinks, basin etc with long screwed shanks and fly nuts, flange end complete all as specified. |
| 20 | S&F in repairs 32 mm dia PVC waste pipe for wash basin /sinks min 1.00m long |
| 21 | S & F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including waste coupling with pipe, bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460mm bowl size 410mmx330mmx160mm |
| 22 | S&F in repair of overhead rain shower brass chromium plated with or without CP arms swivel joint, , including fixing to steel pipe or union complete all as specified and directed. |
| 23 | S&Fin repairs sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 24 | S&F in repairs 600x450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 25 | S & F in repair tubular towel rail stainless steel 20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 26 | S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with 'P' or 'S' trap front or back inlet including footrest (excluding fluxing cistern and flush pipe) complete all as specified and directed. |
| 27 | S&F in repair vitreous china WC Pedestal pattern white including 'P' or 'S' trap front or back inlet including seat cover complete all as specified and directed. |
| 28 | S&F in repair of One piece EWC including P or S trap with soft close seat cover complete all as specified and directed. |
| 29 | S&F of Plastic water closet seat cover (white) (For Pedestal type WC) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as in repair complete all as specified and directed. |
| 30 | S&F of Plastic water closet seat cover (white) (For Single piece Pedestal type WC of any make) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as in repair complete all as specified and directed. |
| 31 | S&F of 20mm dia ball valves, high pressure of PTMT (minimum weight 210 gms) (Polytetra methylene terephthalate) with epoxy coated aluminum rod & high density plastic ball and fly nut, screwed fixed as in repair complete all as specified and as directed. |
| 32 | S&F of 15mm bore stop valve fancy type, two way angle cock, cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed. |
| 33 | S&F of Chromium plated health faucet 15mm dia screwed down high pressure flexible pipe 1.0 to 1.5mtr tube and hook for pedestal pattern water closed fixed as in repair complete all as specified and directed. |
| 34 | M&L Preparing newly plastered or unplastered surfaces of wall and applying one coat of acrylic distemper on old plastered surfaces complete all as specified and directed. |
| 35 | S&F of Chromium plated Jet spray of brass including flexible pipe 1.0 to 1.50m length fixed as in repair complete all as specified and directed. |
| 36 | Cleaning water storage tanks of PVC/HDPE/RCC capacity not exceeding 1000 litre staged over RCC roof/floor slab or similar place inside / out side buildings by removing float valves carefully, thoroughly cleaning the tanks mechnically, including removal of sludge/mud /unpotable water and other depositions to a distance not exceeding 50m as directed to make tank totally dirt free and finally cleaning the water tank with fresh water till water becomes clear to the entire satisfaction of Engineer-in-Charge and re-fixing of float valve complete all as specified and directed. |
| 37 | S&F of Rotational moulded polyethylene water storage tanks 1000 Litre capacity triple layered (white cylindrical vertical with closed top) ISI marked, hoisted & fixed in position with 20mm bore ball valve of high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water storage tank complete all as specified and directed. |
| 38 | S&F of Rotational moulded polyethylene water storage tanks 750 Litre capacity triple layered (white cylindrical vertical with closed top) ISI marked, hoisted & fixed in position with 20mm bore ball valve of high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down existing water storage tank complete all as specified and directed. |
| 39 | S&F of 20mm bore Gun-metal globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron pipe and fixed as in repair complete all as specified and directed. |
| 40 | S&F of 15mm bore chromium plated fancy type Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed and including taking down old unserviceable taps complete all as specified and directed. |
| 41 | S&F of Stop valves/angle valve, 15mm bore, fancy type, chromium plated, cast copper alloy with adjustable wall flange, screwed down, high pressure, screwed both ends for iron pipe or for unions fixed as in repair complete all as specified and directed. |
| 42 | S&F of PVC Cabinet mirror size 350x450x125mm overall size with looking mirror of selected quality glass of approved quality, complete all as specified and directed. |
| 43 | S&F in repair of 10 Litres capacity PVC valve less syphonic action type, flushing cistern low level, white coloured, with inlet, ball valve, float and handle including brackets complete with flush pipe complete all as specified and directed. |
| 44 | S&F in reapir of PVC connection suitable for 15mm bore with PTMT nuts of 600mm length complete all as specified and directed. |
| 45 | S & F in repairs 75x125mm dia of PVC (SWR) floor trap, plain including Stainless steel Grating doom 100mm dia incl jointing with solvent cement complete all as specified and directed. |
| 46 | Taking up or down 15mm bore steel tubing and connection complete all as specified and directed. |
| 47 | All as per item No 46 above but 20mm bore. |
| 48 | Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed. |
| 49 | S&F steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed. |
| 50 | Supplying and laying of CPVC pipes, outer diameter 16mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 51 | S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 52 | S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 53 | Supply for Pipe Supporting Clamping for Single pipe of dia 110 mm (4\\") down take pipe fixing done with Clamping System consists of Rain Water Bracket Set with Pipe Support Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3\\"): Pipe Support Clamping made of : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe having Wall Distance 75 mm (3\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Rain Water Bracket Set with pipe support channel for 110 mm pipe; Wall distance 75 mm (3\\") - 1 Nos. ; 2. U bolt Rubber Sleeve mounted for 4\\" (110 mm) PVC Pipe Dia. - 1 No.; and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Jaipur Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : TD/2022/01 and TD/2024/02. |
| 54 | Dismantling Asbestos cement (corrugated,semicorrugated ,etc )/MS sheet in roof covering complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated/ semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 56 | Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets & snap grid frame work including hangers complete all as specified and as directed. |
| 57 | S&F Plywood, grade BWR 6mm thick, type BB, fixed with screws to timber frame work complete all as specified and directed |
| 58 | S&F Structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes grade St-240 complete all as specified and as shown on drawing. |
| 59 | Supply for Pipe Supporting Clamping - Single Pipe of dia 75 mm (3\\") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3\\"): Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 75 mm (3\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted \\"C\\" Channel with ribs to be used of size 250 mm (10\\") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3\\") - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10\\") - 1 No.; 3. U Bolt Rubber Sleeve mounted for 75 mm (3\\") CI or PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2\\") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Jaipur Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : TD/2022/01 and TD/2024/02. |
| 60 | S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 61 | S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 62 | S&F in repair of Vitreous China Urinal, Half stall type, white including chromium plated water spreader and waste pipe). |
| 63 | M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base, complete, all as specified and directed by Engr-In-Charge. |
| 64 | M&L for 80 mm factory made chamfered edge precast concrete interlocking paver blocks any shape and size locally available of best quality and confirming to IS 15658-2006 , M-30 Grade with grey cement and pigments with appproved colour design &pattern as in footpath, parks, lawan,or light traffic ways of required strength made by table vibratory method using PU mould laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, compacted and proper embedding /laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with fine sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand complte grey cement and pigments complete all as specified and as directed. |
| 65 | Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below complete all as specified and directed (a) S&F drainage spout pipe GI 40 mm dia bore light grade up to outside of outer wall (appx 450 mm to 600 mm long) (b) M&L for PCC 1:1.5:3 type B-O( using 12.5 mm graded stone aggregate ) 50 mm thick laid in slope towards drainage out spout pipe mixed with Water proofing chemical as per manufacturer instructions of MAKE : FOSROC/ SIKA/ PIDILITE/ STP,Khurra 150mmx150mm (min) at appropriate location for free flow of leaked water if any drainage spouts shall be provided integrally while laying PCC, fixing of spout shall be done with same PCC as in this item. (C)M&L 18 mm thick cement plaster in CM 1:3 on vertical faces mixed with water proofing chemical of MAKE:301 Pidicrete URP of Dr Fixit or other techno commercially Equivalent make of SIKA /PIDILITE/ FOSROC/STP. (d) M&L for lime concrete with 40mm graded aggregate as in filling in balance portion of sunken floor. NOTE :- (a) Depth of sunken floor is approx 30 to 40cm. (b) Top floor area of sunken portion shall be considered for measurement and payment. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender