Tender For Addition/Alteration At Mi Line (Appt House) At Mintsd Under Ge (South) Pune
Tender Value
9.36 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
15 days left
EMD
18720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/Alteration At Mi Line (Appt House) At Mintsd Under Ge (South) Pune
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of stone slabs and rubbish off the premises complete all as speicified and directed. |
| 2 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed bed 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as speicified and directed. |
| 3 | M & L ( light shade) Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 as per directed by E-in-charge. |
| 4 | M & L ( light shade) Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over 10mm thick plaster in CM 1:4 including taking down cement plaster, complete all as speicified and directed. |
| 5 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specifed and as directed. |
| 6 | M & L granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring including bedding layer 15 mm thick in CM 1:6 on stone / brick masonry / concrete surfaces including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as speicified and directed. |
| 7 | Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed. |
| 8 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each |
| 9 | S & F 4 mm thick frosted/tinted Sheet glass, selected quality and glazing with using necessary assessories complete all as speicified and directed. |
| 10 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →→ Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 11 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having min density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 ,laminated on both face wooden texture, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (rate inclusive of SS hinges 100 mm-03 nos/ shutter) |
| 12 | S&F 30 mm thick factory made 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) and Fitted to chowkats complete all as specified and as directed. |
| 13 | Supply & fix 300 mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as speicified and directed. |
| 14 | Supply and fix 150mm size Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as speicified and directed. |
| 15 | Supply and fix 150mm size Extruded brass handles, fabricated type polished complete all as speicified and directed. |
| 16 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 17 | M&L for preparing new surfaces of wood of any description no otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 18 | S&F stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples to steel or wooden windows/door/shutters/frames etc. complete all as specified and as directed. |
| 19 | S & F 100 mm size Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as speicified and directed. |
| 20 | S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 21 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 to be finished even and smooth (without using extra lime or cement) complete all as specifed and as directed. |
| 22 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to be finished even and smooth (without using extra lime or cement) complete all as specifed and as directed. |
| 23 | M&L for 15 mm thick on stone masonry surfaces in CM 1:6 and additional 10mm thickness is provided as floating/setting coat to be finished even and smooth (without using extra lime or cement) complete all as specifed and as directed. |
| 24 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as speicified and directed. |
| 25 | M & L for RCC (nominal mix ) type B0 1:2:4 (12.5 mm graded aggegate ) as in Beams, cantilevers, bressumm ers, lintels over 1.5m span. |
| 26 | M & L for Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as speicified and directed. |
| 27 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speicified and directed. |
| 28 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as speicified and directed. |
| 29 | M&L for prepration of newly plastered wall surface and applying two coat of oil bound distemper over 3 mm thick wall care putty complete all as specified and as directed. |
| 30 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 31 | M&L for coloured glazed ceramic designed tiles in vertical surface 600x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM 1:4 including taking down cement plaster removing serviceable tiles to store and rubbish off the premises complete all as speicified and directed. |
| 32 | M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding g 0.06 sqm but not exceeding 0.11 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, incl dismantling floor, hearth , removing serviceable tiles to store and rubbish off the premises complete all as speicified and directed. |
| 33 | Providing & fixing Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm Of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225: 1 987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mrn of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-G dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster Of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24xO.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge |
| 34 | S&F Single piece-WC with PP Seat cover, hinges, Fixing Accessories, Accessories set and cistern fittings complete all as specified and as directed. (Make : Jaquar of cat no CNS-WHT-853P180SPPSM or equivalent model in CERA/PARRYWARE or as approved by GE. ) |
| 35 | S&F Hand Shower( Health faucet) with 1.00mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed. Make Jaquar Product code ALD-CHR-565or equivalent model in Kohler as approved by GE. |
| 36 | S&F Single lever Basin Mixer without popup waste with 600mm long Braided Hoses complete all as specified and directed. (Make : Jaquar Product code OPP-15005BPM or equivalent model in Kohler as approved by GE. |
| 37 | S&F CP toilet paper holder confirming to CAT No ALD-CHR-1153S of \\"Jaquar\\" make here in after. |
| 38 | S&F Soap dish confirming to CAT No ACN-WHM-1131N of \\"Jaquar\\" make here in after. |
| 39 | S&F 2-Way Bib cock with Wall Flange complete all as specified & directed. Make : Jaquar Product code FUS-CHR-29041 model in Kohler as approved by GE. |
| 40 | S&F CP Bibcock with Wall Flange complete all as specified & directed. Make : Jaquar Product code OPP-15037PM model in Kohler as approved by GE. |
| 41 | S&F Semi insert Counter top basin of Size 570x420x195mm complete all as specified & directed. Make : Jaquar Product code FLS-WHT-5601 model in Kohler as approved by GE. |
| 42 | S&F Bottle trap (with internal Partition) 32mm size with 300 & 190mm Long wall connection pipes and wall flange complete all as specified & directed. Make : Jaquar Product code ALE-CHR-773ML300x190 model in Kohler as approved by GE. |
| 43 | M&L for 5mm thick Mirror frameless of selected quality mounted on walls with suitable number of brackets, size and shape as directed, complete all as specified and as directed.Make - Modiguard |
| 44 | S&F Stainless Steel Nahani trap Square grating 5'' x 5'' with diameter of outlet 75mm. Ruhe 304 Grade Stainless Steel Product Code : 16-0307-15 |
| 45 | S&F Wall mixer 3 in 1 with provision for Overhead Shower with 115mm long Bend pipe on Upperside,Connecting Legs & Wall Flange complete all as specified & directed. Make : Jaquar Product code FUS-29281 model in Kohler as approved by GE. |
| 46 | S&F Overhead Shower 200x200mm Square Shape Single Flow (ABS Body Chrome plated with Gray face plate) with rubit cleaning system complete all as specified & directed. Make : Jaquar Product code OHS-CHR-35497 model in Kohler as approved by GE. |
| 47 | S&F health faucet with 8mm dia, 1.2mtr flexible tube complete all as specified and directed. Make: Prayag/ Shakti/CERA |
| 48 | S & F ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' make and rubber beading etc all as directed(a) SP : 20048(b) Glazing clips : 19352 |
| 49 | S&F GI tubing tubes \\"medium grade\\" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc including taking up or down carefully steel tubing and connections complete all as specified and directed of the following sizes :- |
| 50 | (a) 15mm bore |
| 51 | (b) 20mm bore |
| 52 | S&F Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed of following bore of pipe :- |
| 53 | (a) 15mm bore |
| 54 | (b) 20mm bore |
| 55 | S & F Rotational moulded polyethylene water storage tanks of capacity 1000 Litre (cylindrical vertical with closed top) hoisted and fixed in position incl all necesarry GI fittings complete all as specified and directed. |
| 56 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as speicified and directed. |
| 57 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/ dense soil complete all as speicified and directed. |
| 58 | M & L Cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 59 | M & L rolled mild steel in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc of Fe 290 Gde E 165 complete all as speicified and directed. |
| 60 | M & L MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as speicified and directed. |
| 61 | Preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over and including red oxide primer complete all as directed. |
| 62 | M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75mm thick laid in alternate bays including finishing the surfaces even and smooth using extra cement as in path , plinth protection complete all as specified and directed. |
| 63 | M & L Cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as speicified and directed. |
| 64 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 65 | M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 300 x 300mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) incl demolition of old stone slab/tiles of any description complete all as specified and as directed by E-in-charge. complete all as specified and as directed by E-in-charge. |
| 66 | M&L PCC (1:2:4) type B-1 using 20 mm stone graded aggregate as in coping, kerbs, bed blocks etc including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed |
| 67 | Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, and getting out in soft/loose soil complete all as speicified and directed. |
| 68 | Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, and getting out in hard/dense soil complete all as speicified and directed. |
| 69 | M&L for PCC 1:4:8 type D2 using 40mm graded agg as in bed to drain pipes including forming cradles for for following sizes :-. |
| 70 | (a) 150mm bore RCC hume pipe. |
| 71 | (b) 200mm bore RCC hume pipe. |
| 72 | M&L RCC pipes class NP-2 with socketed ends laid and jointed complete of following sizes.'(Note :- Laying of sewage line in running sewage water & temporary diversion /plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate for the same is seems to be included in the contract) |
| 73 | (a) 150mm bore |
| 74 | (b) 200mm dia. |
| 75 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soil complete all as speicified and directed. |
| 76 | Removing the excavated materials exceeding 50mtr but n.exc 250 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as specified and directed by Engineer-in-Charge. |
| 77 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, for the following internal dia of pipe :- |
| 78 | (a) 150mm bore |
| 79 | (b) 200 mm Bore |
| 80 | S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc all as complete and directed. |
| 81 | M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate)as in surface channels and drains incl all moulds and forms complete all as speicified and directed. |
| 82 | Extra for forming fair finished drain or channels 30 cm inner girth in cement, concrete using extra cement including forms, moulds, mitred/stopped ends in manholes (inner girth only measured) |
| 83 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors/in earth of 110 mm dia complete all as speicified and directed. |
| 84 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors/in earth of 75 mm dia complete all as speicified and directed. |
| 85 | S&F PVC (SWR) bends plain 110 mm bore complete all as speicified and directed. |
| 86 | S&F PVC(SWR) bends plain 75mm bore complete all as speicified and directed. |
| 87 | S&F PVC (SWR) bends with oval access door of 110 mm bore complete all as speicified and directed. |
| 88 | S&F PVC (SWR) bends with oval access door of 75 mm bore complete all as speicified and directed. |
| 89 | S&F PVC SWR Branch piece single (Single Y) equal or unequal 110mm dia with door access complete all as speicified and directed. |
| 90 | S&F PVC SWR Branch piece single (Single Y) equal or unequal 75 mm dia with door access complete all as speicified and directed. |
| 91 | S&F PVC (SWR) of 110mm dia junction single (single 'T') equal or unequal with door access complete all as speicified and directed. |
| 92 | S&F PVC (SWR) of 75 mm dia junction single (single 'T') equal or unequal with door access complete all as speicified and directed. |
| 93 | S/F PVC SWR Branch piece double (double 'Y') equal or unequal 110mm dia with door access complete all as speicified and directed. |
| 94 | S/F PVC SWR Branch piece double (double 'Y') equal or unequal 75mm dia with door access complete all as speicified and directed. |
| 95 | S&F for 110 mm dia PVC SWR vent cowl complete all as speicified and directed. |
| 96 | S&F for 75 mm dia PVC SWR vent cowl complete all as speicified and directed. |
| 97 | M&L for point wiring complete with 1.5 Sqmm two single core PVC insulated, unsheathed 1100volts agrade cable with multi stranded copper conductor FRLS grade conforming to IS-694 part II with ISI mark FRLSH grade drawn through and including suitable size rigid non metalic PVC conduit in surface/wall with all accessories, including suitable size sunk pressesed steel or cast iron terminal box with 3mm thick plastic laminated sheet top cover fixed flush with wall surface by means of brass screw and sunk cup washers for mounting of switches, sockets, fan regulators etc including providing 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as earth wire connected to metallic bodies of luminaires/fan etc at one end and to common earth dolly at other end all as specified for fan/light point all specified and directed by engineer-in-charge. |
| 98 | Ditto as per item no 87 but for One 5/6 Amps socket point on independent board. |
| 99 | Ditto all as per item no. 87 above but One 3 pin 6 Amps socket outlet point on same board with other switches, with cables 1.5 sq.mm size |
| 100 | M&L for point wiring complete with 4.0 Sqmm single core PVC insulated, sheathed 1100 volts grade cable with stranded copper conductor FRLS grade conforming to IS-694 part II with ISI mark FRLS grade drawn through and including suitable size in PVC conduit on surface with all accessories on wall/ceiling/floors/roofs etc including providing 4.0 Sqmm PVC insulated sheathed straded copper conductor cable as earth wire connected to metallic bodies of luminaires etc at one end and to common earth dolly at other end for One 3 pin socket outlet,15 Amps,independent all specified and directed by engineer-in-charge. |
| 101 | Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of Powder coated die cast /Extruded aluminium Body of 18-22 Watt capacity and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver driver with SMPS and efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KVwith Short & Open circuit protection ,THD < 10% , P.F.≥0.95 , IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours CCT 3000°K / 4000°K / 5700°K /6500°K . System lumen efficacy ≥120 lm/Watt output complete all as specified and directed by Engr-in-Charge. |
| 102 | S&F of 1x10 watt,230V , / Min 100 lms/w surface and wall mounted LED batten suitable for mirror light with Aluminium housing, glare free,and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified and directed by Engr-In- Charge, |
| 103 | Supplying, Installation, Testing & Commissioning of Panel light 2x2 ft., of Powder coated die cast /Extruded aluminium Body of 36 watt capacity and construction as per IS : 10322 with driver with SMPS as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50 hz, Operating temp range -10°C to 45°C, internal surge protection of 4 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80,UGR (Unified Glare Rating) <19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), System lumen efficacy ≥120 lm/Watt output complete all as specified and directed by Engr-in-Charge. |
| 104 | Supply and fixing ceiling fans complete with aluminium blades, down rods, copper winding, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all specified and directed by engineer-in-charge. |
| 105 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed by Engr-in-Charge. |
| 106 | Supply and fix of modular switch type 10 amps one way one module complete as specified and directed by Engr-in-Charge. |
| 107 | Supply and fix of modular Socket, 6A - 2/3 pin 2 module complete as specified and directed by Engr-in-Charge. |
| 108 | Supply and fix of modular Socket, 6/16A - 2/3 pin 2 module complete as specified and directed by Engr-in-Charge. |
| 109 | Supply and fix of modular switch piano type 16 amps one way one module all specified and directed by engineer-in-charge. |
| 110 | M&L for sub main wiring with two runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 4.0 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 4.0 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all specified and directed by engineer-in-charge.Note : Two runs of 4.0 Sqmm cable with 01 run of 4.0 Sqmm earth wire along with casing caping/conduit shall be measured as one RM |
| 111 | M&L for sub main wiring with two runs of single core PVC FRLS insulated cable with copper conductor multistranded 1100 volts grade 10.0 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 10.0 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all specified and directed by engineer-in-charge.Note : Two runs of 10.0 Sqmm cable with 01 run of 10.0 Sqmm earth wire along with casing caping/conduit shall be measured as one RM |
| 112 | Supply and fixing sheet metal enclosure MCB DB SPN 8 ways double door type with suitable bus bar complete all specified and directed by engineer-in-charge. |
| 113 | Supply and fixing MCB SP, 6 to 32 Amps, ''B'' series 240 Volts, single phase, 10 KA breaking capacity complete all specified and directed by engineer-in-charge. |
| 114 | Supply and fixing MCB SPN, 32 Amps, ''B'' series 240 Volts, single phase, 10 KA breaking capacity complete all specified and directed by engineer-in-charge. |
| 115 | Supply and fix electric water heater, storage type with heating element upto 2 KW capacity 25 litre, BEE 5 Star, verticle mounting, High-Grade PUF Injection/ high density thermal Insulation Type, , 8 bar rated water Pressure, Outer Body Material should be ABS shock proof plastic/steel finish metal/Premium PPGI Dual-Tone, Inner Tank Material should be Mild Steel Container/ Thick Rolled Steel Tank/ DuraAce Marine Steel with tank corrosion coating Glasslined Enamel/Feroglas Coated/Titanium Enriched Vitreous, heating Element Type should be Silent Copper / Incoloy/Duracoat Non-Stick complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed by Engr-in-Charge. |
| 116 | M& L for shifting of existing DB to outside of room specified and directed by Engr-in-Charge. |
| 117 | Supply and Fixing of Ceiling rose, single phase,PVC or polycarbonate with isolated body at the locations required for fans or lights located on the ceiling 10 feet above the ground all specified and directed by engineer-in-charge. |
| 118 | Material and labour for taking connection from existing water main upto 50 mm dia bore including cutting the main, insertion of GI reducing Teef of suitable size, providing necessary fittings like GI Tee, socket, Nipple, threading , making good etc complete all as specified and directed by Engr in charge. |
| 119 | Supply and lay pipe galvanized, “Medium Grade”, including fittings 25 mm dia complete all as specified and directed by Engr in charge. |
| 120 | Supply and fixed gate valve size 25 mm dia complete all as specified and directed by Engr in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender