Defence Statutory Bodies & Commissions/Committees Closing in 16 days TDR #57966550

Tender For special Repair To Mes Installation, Provn Of Drain Cover And Allied Wks Under Mil Stn Dharamshala

Issued by Statutory Bodies & Commissions/Committees · Kangra, Himachal Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Oct 2026
16 days left
EMD
75000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for special Repair To Mes Installation, Provn Of Drain Cover And Allied Wks Under Mil Stn Dharamshala

BOQ

Name of Work:- Spl Repair to MES installation, Provn of Drain Cover and allied wks under Mil Stn Dharamshala
Sl. No. Item Description
1Demolition of cement concrete (un-reinforced) as in PCC poles in any position not otherwise specifically provided complete all as specified and as directed.
2Excavating in post holes soft/loose soil (or similr holes) not exc0.5 Cum getting out returning filling in and reamming earth or broken rubble mixed with earth around, in lyers not exceeding 25 Cum watering and removing surplus soil to a distance no exc 50m and making good surfaces.complete all as specified and as directed.
3M&L cement concrete in foundations filling and mass Concrete type B2 1:2:4 (40mm graded crushed stone aggregate) complete all as specified and as directed.
4S&F roof truss, purlin, crane gantries, rail, post and fastening and braket framing structural Steel FE-410 W grade E-250 B quality, complete all as specified and as directed.
5M&L applying two coats of synthetic enamel paint over a coat of red oxide including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and as directed.
6Excavation in trenches in any type n.exc 1.5 mtr deep and 1.5 mtr wide and plan area n.exc 10 Sqm as in pits/col foundation etc complete all as specified and as directed.
7Returning/filling in levers including spreding, leveling, watering and well ramming in layers not exc 25cm each.complete all as specified and as directed.
8Removing excavated earth not exc 50 m and depositing whereas directed as a level n, exc 1.5m above the starting point.complete all as specified and as directed.
9Demolition of stones or brick masonry built in cement mortar including all quoins, arches etc. but excluding ashlar facing, dressed stone work etc. complete all as specified and as directed.
10M&L for stone walling of random rubble with best quality locally available harder stone such as granite, trap or basalt brought upto courses well bonded bedded, solidly hearted and built in cement mortar 1:6, complete all as specified & directed
11All as per Srl item No. 10 above but except stone
12M & L brick work with subclass 'B'bricks,straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.
13PCC M-15 (Nominal Mix) Using 20mm graded crushed stone aggregate as in coping including necessary formwork complete all as specified and directed
14Precast cement concrete M-15 (Nominal Mix) Using 20mm graded crushed stone aggregate as Bond stone including necessary formwork complete all as specified and directed.
15PVC (SWR) pipe 110mm dia of pressure rating 4Kg/Sqm fixed in retaining wall complete all as specified and as directed.
16Extra over stone walling for hammer dressing with maximum despression from a straight edge held against the surface not exceeding 40mm dressing on sand stone complete all as specified and as directed.
17Raised pointing to random rubble walling uncoursed in cement mortar 1:4 complete all as specified and as directed.
18M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
19Glazed ceramic tiles coloured, (first quality), of size 300x450mm x7mm thick on vertical surfaces such as skirting dados and risers to walls etc, joint free/joint less, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over and including 10 mm thick rendering in CM 1:3 incl taking down existing tiles complete all as specified and as directed.
20Taking down cement plaster/terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints for key and scrubbing down with water etc complete all as specified and as directed.
21Demolition of cement concrete in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced, complete all as specified and as directed.
22M&L cement concrete type C2, 1:3:6 (40mm aggregate) in foundations filling and mass concrete complete all as specified & directed
23M&L for Chequered cement concrete tiles with grey cement and not pigment,30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over and including 15mm thick screed bedding layer in cement mortar 1:6 complete all as specified and as directed.
24Dismantling of corrugated or plain steel sheeting of any gauge thickness, including Nainital or similar pattern roof coverings all as specified and directed.
25Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, roof covering/cladding fixed with self tapping screws complete all as specified and as directed.
26Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed.
27Dismantling of framed work timber scantlings 40 Sqcm and over in section, in any position.complete all as specified and as directed.
28Material and labour for 2nd class hard wood as in scantling, framed work as in ceiling, clean swan timber and fixed in any position complete all as specified and as directed.
29M & L for rendering 15mm thick on stone masonry or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.
30M&L PCC type B-1:1:2:4 (20mm graded crushed stone aggregate) as in surface channels and drains etc complete all as specified and as directed.
31M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and as directed.
32Supply and fix framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290. Gde-E-165 etc complete all as specified and as directed.
33Cutting holes into or through stone walls built in cement mortar,superficial area exc 150 sq.cm but n.exc 400 sqcm and making good with cement concrete 1:2:4 of 20mm aggregate.complete all as specified and as directed.
34M&L for providing precast cement concrete cover slabs and similar work type B-1 (1:2:4) using 20mm graded crushed stone aggregate set in cement mortar (1:4) complete all as specified and as directed.
35Fixing only mild steel TMT CRS bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and excluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.Note: Reinforcement steel shall be issued to the contractor from departmental store at free of cost as, as directed by Engr-in-Charge. The Contractor shall be fully responcible for loading, unloading, transpotation, safe custody, proper storage, cutting, bending and placing in position at site. Binding wire shall be used by contractor own expence. No extra payment shall be admissible on this account, any loss, wastage or damage shall be recovered from the contractor as per rules.
36Taking up or down GI tubing including all fittings from trenches, wall, floor etc including cleaning for refixing or removing to store for safe custody/ reuse at indicated site or disposal under schedule of credit of size 100 mm bore complete all as specified and directed.
37Supply and laying in walls/ceilings/floors GI pipe medium grade (ISI Marked) including fittings such as bends, elbows, union, socket etc., of size 100 mm dia complete all as specified and directed.
38M&L construction of Brick Masonry Valve Pit, one Brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40x5mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement and 40 x 40 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded aggregate) Block of size 230 x 200 x 100 mm, applying two coats of Anti-corrosive Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work in Soft/Loose Soil and demolition of old unserviceable Valve Pit of sizes 90 x 90 x 90 cm complete all as specified and as directed.
39Supply and fixing in replacement CI sluice valve of size 100 mm dia confirming to IS-14846 PN-1.0 non raising type both ends flanged with SS spindle including jointing materials such as nuts, bolts washers and 3mm rubber gasket 02 Nos complete all as specified and directed incl taking down old one. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57966550
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 30-10-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair To Mes Installation, Provn Of Drain Cover And Allied Wks Under Mil Stn Dharamshala
Basic Detail
Tender No GEP-92/2026-27
Bidding Type Tender
Location
City Kangra
State Himachal Pradesh
Key Dates
Publish Date 09 Oct 2026
Submission Date 30 Oct 2026
Open Date 06 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 75000
Exemption Not Available
Document List
BOQ_889458.xls
c52573bd-9f96-455a-8a3c-8eac32034c6b.html
td.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 09, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Nov 06, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_889458.xls

html

c52573bd-9f96-455a-8a3c-8eac32034c6b.html

pdf

td.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender