Tender For Supply, Fabrication And Installation Of Laboratry Facilities For Chemistry Laboratory In Amd Complex, Scr , Cherlapally, Hyderabad.
Tender Value
43.44 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
0 days left
EMD
86892
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal malkajgiri → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Fabrication And Installation Of Laboratry Facilities For Chemistry Laboratory In Amd Complex, Scr , Cherlapally, Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Note:- 1. The Bidder should not consider EPF and ESI in his rates. The bidder should be an official member of SEFA (Scientific Equipment and Furniture Association) and copy of SEFA certificate shall be submitted along with bid documents. Without SEFA Certificate the bid will be rejected in technical evaluation. 2. The bidder must provide valid SEFA third-party test certificate from any leading testing laboratories for Fume Hoods and furniture as per standard of SEFA – 8M or SEFA – 8W. |
| 2 | Supplying, fabricating, installation and commissioning of Laboratory Wall Bench (WB-1) of size 4750 × 900 × 900 mm, comprising C-frame structure made of 60×30×2 mm hollow sections, duly treated and finished with 16 mm thick phenolic resin (Trespa or equivalent make) worktop, including 750 mm wide storage units (1 drawer & 2 shutters), PP sink (600 (L)×450(W)×315(D) mm) with plumbing, three-way water tap with swan neck spout, PP adjustable pegboard (600×600 mm) with 46 Nos PP pegs, double outlet eye wash SS breaded flexible, GI powder coated electrical raceway, single-sided two-tier reagent rack in GI construct, 6/16 Amp sockets with 16 Amp oneway switch, GI filler panel & closed panels, complete with all fittings, fixtures, hardware, testing and commissioning, as per approved design and direction of Engineer-in-Charge. |
| 3 | Supplying, fabricating, installation and commissioning of Laboratory Wall Bench/Wall cabinet (WB-2) of size L (4260 × 3560)x W 900 mm x H in mm , comprising C-frame structure made of 60×30×2 mm hollow pipe sections, duly treated and finished with 16 mm thick phenolic resin (approved make) worktop, including 750 mm wide storage module (1 drawer & 2 shutters), 600mm wide storage module (1 drawer & 2 shutters) and 550mm wide storage module (1 drawer & 2 shutters) , Worktop mounted electrical raceway in GI powder coated, single-sided two-tier reagent rack in GI construct, 6/16 Amp electrical sockets with 16 Amp oneway switch, GI filler panel & closed panels, complete with all fittings, fixtures, hardware, testing and commissioning, as per approved design and direction of Engineer-in-Charge. |
| 4 | Supplying, fabricating, installation and commissioning of Laboratory Corner bench/Cabinet (CB-1) of size L 1030mm X W 1030 mm X H 900mm , duly treated and finished with 16 mm thick phenolic resin (approved make) worktop, including corner storage module with one shutter, Single piece molded PP sink (L 600mm X W 450mm X D 315mm), Worktop mounted three way water tap with swan neck spout, PP adjustable pegboard (600×600 mm) with 46 nos PP pegs, double outlet eye wash with SS breaded flexible , GI filler panel, complete with all fittings, fixtures, hardware, testing and commissioning, as per approved design and direction of Engineer-in-Charge. |
| 5 | Supplying, fabricating, installation and commissioning of laboratory wall bench/cabinet (WB-3) of size 4600 mm (L) × 900 mm (W) × 900 mm (H), comprising c-frame structure 60×30×2 mm thick hollow pipe, duly treated and finished with 16 mm thick phenolic resin (approved make) worktop, including 750 mm wide storage module with one drawer and two shutters, single piece molded PP sink (600 (L)×450(W)×315(D) mm), three way water tap with swan neck spout, PP adjustable pegboard with 46 nos pegs (600×600 mm), double outlet eye wash with SS braided flexible , three tier reagent rack in GI construction, GI powder coated electrical raceway with 6/16 Amp sockets and 16 Amp one way switches, filler panels in GI construct and closed panels, all complete as per specifications and direction of Engineer-in-Charge. |
| 6 | Supplying, fabricating, installation and commissioning laboratory laboratory wall bench/cabinet (WB-4) of size 4260 mm (L) × 900 mm (W) × 750 mm (H), comprising 60×30×2 mm thick hollow pipe with 18±1 mm thick black granite worktop, including 750 mm wide storage module with (1 drawer & 2 shutters) with leg space, GI powder coated electrical raceway with 6/16 Amp sockets and 16Amp one way switches, data sockets, filler panels in GI construct, closed panels and lab stools, complete as per specifications and direction of Engineer-in-Charge. |
| 7 | Supplying, fabricating, installation and commissioning of Spot Extractor in PP construction complete with 385 mm dia aluminium ceiling bracket (upto 1200 mm length), with necessary arrangement for connection, including all accessories, complete as per specifications and direction of Engineer-in-Charge. |
| 8 | Supplying, installation and commissioning of Exhaust Fan for 2 nos Spot Extractor, single piece molded UV treated chemical resistant SISW direct driven centrifugal fan in PP construction with suitable stand in MS powder coated construction suitable for two spot extractors having capacity CFM 100 to 150 , corrosive resistant PP impeller with extra strength, high efficiency properties which produce lower noise and power consumption, Drive 1 HP, 1400 RPM, 415V, 50Hz motor (TEFC, Class B insulation induction motor, IP55 enclosure) in Non-FLP const. Including 16A, 3 Phase MCB for fan(approved make) and DOL starter, complete as per specifications and direction of Engineer-in-Charge. |
| 9 | Suplying, febrication and fixing floor standing Emergency safety shower with eyewash unit, main frame fabricated in stainless steel, complete with all fittings and accessories, as per specifications and direction of Engineer-in-Charge. |
| 10 | Supplying, fabricating, installation and commissioning of Anti- Vibration table (AVT) of size 750(L)× 600(W) × 900 (H) mm, fabricated with 1.2 mm thick GI sheet, structuire made in 50×50×2 mm GI hollow pipe const. with epoxy coating, including 18±1 mm thick black granite top, GI powder coated electrical raceway with 6/16 Amp sockets and 16Amp one way switches, service pendant (150×150 ), complete as per specifications and direction of Engineer-in-Charge. |
| 11 | Supplying, fabricating, installation and commissioning of Glassware Storage Cabinet (GSC) of size 750(L) × 450 (D) × 1830 (H), made of GI powder coated construction, cabinet will have 5 adjustable shelves comparting 6 compartments, double skin glass doors with SS handles, complete as per specifications and direction of Engineer-in-Charge. |
| 12 | Supplying, fabricating, installation and commissioning of Chemical Storage Cabinet/cupboard of size 1000(L) × 450(D) × 1830(H), with GI epoxy powder coated outer body, 5 mm thick PP inner lining/baffles, provision for ventilation from each shelf, double skin metallic doors with lock, butt hinges and positive catch, including 100 mm dia PP duct damper in PP consts,, complete as per specifications and direction of Engineer-in-Charge. |
| 13 | Supplying, installation and commissioning of Exhaust Fan single piece molded UV treated chemical resistant SISW direct driven centrifugal pump in PP construction with suitable stand in MS powder coated construction suitable for two spot extractors having capacity CFM 800 , corrosive resistant PP impeller with extra strength, high efficiency properties which produce lower noise and power consumption, Drive 2 HP, 1400 RPM, 415V, 50Hz motor (TEFC, Class B insulation induction motor, IP55 enclosure) innon-FLP const. Including 16A, 3 Phase MCB for fan(approved make) and DOL starter for motor, complete as per specifications and direction of Engineer-in-Charge. |
| 14 | Supplying, fabricating, installation and commissioning of Chemical Storage Cabinet/cupboard of size 750(L) × 450(D) × 1830 (H)mm , with GI epoxy powder coated outer body, 5 mm thick PP inner lining/baffles, provision for ventilation from each shelf, double skin metallic doors with lock, butt hinges and positive catch, complete as per specifications and direction of Engineer-in-Charge. |
| 15 | Notes: 1.All work should be done without damaging the existing infrastructure and laboratory equipment.2. No Debris/Waste materials shall be left over during the work.3. The contractor has to be clean the site after the complertion of work and handover as satisfection of Engineer-in-Charge.4. Before quoting, the Bidder shall visit the site and make himself familiar with the site nature, conditions and Quantum/ scope of work involved. Site inspection and uploading of report is mandatory. The bidder shall upload the site inspection report duly signed by departmental representative and Bidder. Without the site inspection report, the bid will be summarily rejected.5. The rates quoted shall include cost of all materials, labour, ladders, transportation, hoisting, tools, tackles and installation including all taxes (except EPF and ESI) and other charges if any. No extra payment over and above the rate quoted shall be made to the contractor in this respect.6. The Workers employed for the work still strictly follow all safety measures as stated in safety code of this tender and also as per DAE safety code. |
| 16 | Notes: 7. The contractor shall adhere to the provisions of applicable labour laws such as Contract Labour (Regulation and Abolition) Act,1970. Minimum Wages Act, 1948, Employee State Insurance Act. Equal Remuneration Act, 1970 and rules made there under.8. Contractor has to pay minimum wages, EPF and ESI to the manpower deployed for the work as per state/ Central Government orders issued from time to time. The actual amount paid towards EPF and ESI shall be reimbursed to him by the department after satisfying that it has been actually and genuinely paid by the contractor The Bidder should not consider EPF and ESI in his rates. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender