Tender For Creation Of Control Room At 5Th Floor, Neer Shakti Sadan, Nhpc Office Complex, Sec-33, Faridabad.
Tender Value
24.52 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
12 days left
EMD
49000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridabad → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Creation Of Control Room At 5Th Floor, Neer Shakti Sadan, Nhpc Office Complex, Sec-33, Faridabad.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. |
| 3 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) |
| 5 | Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for : Lintels, beams, plinth beams, girders, Columns, bressumers and cantilevers |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo- echanically Treated bars of grade Fe-500D or more. |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 9 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 10 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) |
| 11 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.2 Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red |
| 12 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I |
| 13 | Providing and fixing wooden panelling made up of 18 mm thk. commercial ply of approved make fixed to the wall and top finished with Charcol Panels in required pattern as per design and drawing and the instructions of Engineer-in-charge/Architect. |
| 14 | Providing & fixing of the Acoustical panels of 9mm thickness with square or beveled edge manufactured from 100% Polyethylene Terephthalate (PET) having density of >100 ( the panel shall have 60% recycled content) , Kgs/m3, Manufactured panels should be fire resistant as per B1 Class A (make Versatile acoustic/ Nowofill/ Gyptech). The panel to be glued over the perforated 12mm ply and GI framework ( ply & Gi framework paid separately). The panels in different colours to be cut with laser cutter for smoth & perfect edging in shape as per the design drawings. The panels to be further glued to the ply with SH/SR adhesive ( Fevicol / Araldite / Vamicol). The work to be done complete as per the design & instructions of engineer in charge including accessories as required. |
| 15 | Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick |
| 16 | Providing and fixing wooden cabinet upto 600 mm deep with complete structure including internal shelves/partitions, drawers etc. made up of 19 mm thk. BWP grade marine ply and shutters made up of 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved make with outside visible surface finished with 1 mm thk. laminate of approved pattern, make, colour and shade in required pattern as per the drawing and the internal surfaces shall be finished with 0.8 mm thk. laminate of approved make, colour and shade. The work should include all the hardware fitting like hinges, handles, locks, catcher, hanger rod etc. of best quality in stainless steel as per the approval of Engineer-in-charge. |
| 17 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 18 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 20 | Providing and fixing European type WC without cistern complete. (Modle Jaquar KUS-WHT-35953BIUFSM) |
| 21 | Providing and fixing concealed cistern (Modle Jaquar Model JCH-WHT-2400P) with flush control plate (Modle Jaquar Model JCP-CHR-352415) necessary arrangement for fixing complete. |
| 22 | Providing & fixing health faucet for ablution with PVC tube, hand shower, couplings, wall hook and other accessories etc. complete in all respect. ( Jaquar make Cat No ALD-CHR-573 ) |
| 23 | Providing and fixing C.P.brass angle valve 15 mm nominal bore. (Jaguar Model No KUP35053PM) |
| 24 | Providing and fixing C P Brass two way bib cock with wall flang of approved quality 15mm nominal bore . (Jaguar Model No KUP35041PM) |
| 25 | Providing and fixing C P Brass long body bib cock with wall flang of approved quality 15mm nominal bore . (Jaguar Model No KUP35037PM) |
| 26 | P/F bright finished stainless steel toilet paper holder with flap (Jaguar Make) (Cat AKP-CHR-35753PS). |
| 27 | P/F bright finished stainless steel towel rail/rack with necessary screws and nuts etc complete of approved make. (Jaguar Make) (AKP-CHR-35781PS) |
| 28 | Providing and fixing Wash Basin including single lever basin mixture complete. (Wash basin Jaquar make model No KUS-WHT-35935 including basin mixture Jaquar KUP-35021PM Jaquar make waste Jali ALD-705) |
| 29 | Providing and fixing bathroom vanitity of Mercato model (ALISANDRIA - MR-2159024) of 24\\" inch with cabinet (MR-2159024-BC) and counter stone slab (MR-811001-24-CS) and looking mirror (MR-9911018-WH). |
| 30 | Providing and fixing CP Stainless steel 32mm size Bottle Trap (Jaguar Model NoALD-CHR-769L250X190) |
| 31 | Providing and fixing soap dispensor with glass bottle (Jaguar Model No CPA-CHR-1135) |
| 32 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 33 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 34 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 35 | Providing and laying of Tiled Polypropylene Carpet of pile height 4 to 5mm and pile weight 700grams/sqm with primary backing of non woven lutrador and secondary backing of PVC with fiber glass with Underlay by the use of Pidilite adhesive as required Complete. |
| 36 | Providing and fixing wooden panelling made up of 18 mm thk. BWP grade marine ply of approved make fixed to the wall with 4 mm thk. MDF fixed on the ply in required pattern as per design and drawing. |
| 37 | Providing and fixing wooden panelling made up of 19 mm thk. BWP grade marine ply of approved make fixed to the wall in required pattern as per design and drawing. |
| 38 | Providing and fixing 12 mm thk. Toughened glass door of size upto 1000 x 2100 mm including stainless steel fitting like floor spring, 300 mm long handle, lock, other patch fitting etc. complete as per the direction of Engineer-in-charge |
| 39 | Providing and fixing Zebra Blind of approved make having base material 100% PES, shrinkage factor <= 0.8%, tolerence solid+shear +/-3mm, 0.11 inch, weight 102gm/sqm., thickness 0.24 mm having height transparent strip 50 mm and woven strip 75 mm etc. complete as per the direction of Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender