Tender For Special Repairs To I.E. Works For The Office Of The Sub-Divisional Magistrate, Sadar, West Tripura.
Tender Value
18.59 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
1 days left
EMD
37184
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To I.E. Works For The Office Of The Sub-Divisional Magistrate, Sadar, West Tripura.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:- |
| 2 | Short Point :- |
| 3 | Medium Point :- |
| 4 | Long Point :- |
| 5 | Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 6 | Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 7 | Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required. |
| 8 | 2 X 1.5 sq mm |
| 9 | 2 X 2.5 sq mm |
| 10 | 2 X 4 sq mm |
| 11 | 4 X 6 sq mm |
| 12 | 4 X 10 sq mm |
| 13 | 4 X 35 sq mm |
| 14 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:- |
| 15 | 1 X 1.5 sq mm |
| 16 | 1 X 2.5 sq mm |
| 17 | 1 X 4 sq mm |
| 18 | 1 X 6 sq mm |
| 19 | 1 X 10 sq mm |
| 20 | Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required. |
| 21 | 19/20 mm dia |
| 22 | 25 mm dia |
| 23 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required. |
| 24 | Ding dong call bell |
| 25 | Musical call bell |
| 26 | Remote controlled call bell |
| 27 | 2.5 mfd fan capacitor |
| 28 | 3mm thick bakelite sheet |
| 29 | 5 amps power top:- |
| 30 | 32 amps DP kit kat switch:- |
| 31 | Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required. |
| 32 | 102mm x 178mm (4\\" X 7\\") :- |
| 33 | 203mm x 300mm (8\\" X 12\\") :- |
| 34 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. |
| 35 | 1-2 module plastic switch board:- |
| 36 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required. |
| 37 | 1-2 module :- |
| 38 | Supplying and fixing of the following modular accessories including necessary connection etc. as required. |
| 39 | Bell push SP (1M) :- |
| 40 | 3/6 pin 16/20 amps socket outlet (2M):- |
| 41 | 4 step fan regulator (1M):- |
| 42 | Buzzer call bell (1M):- |
| 43 | Blank plate (1M):- |
| 44 | 20/25 amps single phase motor starter switch (2M):- |
| 45 | Providing earthing system with maintenance free earthing electrode of 50 mm dia & 3 mtr long of dual electrode technology filled with highly conductive compound and back fill compound of 2 nos. 25 kg bag, terminal size 32mmx 6mm including accessories with masonry enclosure of CI cover plate size 12\\"x 12\\" having locking arrangement including CC works etc as required:- |
| 46 | Supply and fixing of 25mm x 5mm GI strip on wall/ floor of the building for horizontal/ vertical run including necessary spacers and porcelain insulators at regular intervals. |
| 47 | Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required. |
| 48 | Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/min/W) : - |
| 49 | Supplying & installation of 400 mm sweep AC wall mounting fan with metal blade including connection etc as required:- |
| 50 | Supplying of 400 mm sweep AC padestal fan with metal blade etc as required:- |
| 51 | Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:- |
| 52 | Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required:- |
| 53 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:- |
| 54 | Dismantling the existing ceiling fan and making winding by (34/35/36 S.W.G) Copper wire, varnish, oiling, greasing and re-fixing the same including wiring the down rod of standard length ( up to 30 cm ) etc. as required :- |
| 55 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required: |
| 56 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 57 | Surface mounted integrated 10 watt LED batten with polycarbonate diffuser:- |
| 58 | Surface mounted integrated 20 watt LED batten with polycarbonate diffuser:- |
| 59 | Surface mounted box type batten suitable for double 18/20 watt integrated LED tube lamp (without lamp):- |
| 60 | Surface mounted round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 61 | Surface mounted round/Square shaped 18/20 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 62 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:- |
| 63 | 18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):- |
| 64 | 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 65 | Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:- |
| 66 | 100 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):- |
| 67 | 200 amps 415 volts four strip Copper busbar chamber 6 ways of size (610mmx410mmx120mm):- |
| 68 | Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required:- |
| 69 | 100 amps kitkat porcelain fuse unit with base(rewireable):- |
| 70 | 200/250 amps kitkat porcelain fuse unit with base(rewireable):- |
| 71 | Supplying and installation of change over switch of following ratings with enclosure including necessary connection etc. as required:- |
| 72 | 63 amps FP on load change over switch (Front handle with enclosure):- |
| 73 | Supplying and fixing of powder coated sheet steel enclosure on surface/ recess, suitable for 240/415 volts MCB/Isolator/RCCB (SP/ SPN/ DP/ TP/ TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required. |
| 74 | 2 way SPN MCB DB (single door):- |
| 75 | (2+6) / 8 way SPN MCB DB (double door):- |
| 76 | 4 way horizontal TPN MCB DB (Double door):- |
| 77 | 6 way horizontal TPN MCB DB (Double door):- |
| 78 | 8 way horizontal TPN MCB DB (Double door):- |
| 79 | Supplying and installation of powder coated steel sheet enclosure for 415 volts MCCB (TP/FP) complete with necessary connection etc as required |
| 80 | Enclosure suitable for MCCB upto 100 amps:- |
| 81 | Enclosure suitable for MCCB above 100 amps upto 250 amps:- |
| 82 | Supplying & fixing of following ratings MCB B/C curve having breaking capacity 10 KA in the existing MCB DB including connection as required:- |
| 83 | 6 to 32 amps SP MCB:- |
| 84 | 6 to 32 amps DP MCB:- |
| 85 | Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:- |
| 86 | 40 amps DP isolator:- |
| 87 | 63 amps FP isolator:- |
| 88 | Supplying & installation of TP/FP MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings):- |
| 89 | 16 to 100 amps FP MCCB, Breaking capacity 16/18KA (Thermal Magnetic):- |
| 90 | 160 amps FP MCCB, Breaking capacity 25KA (Thermal Magnetic) :- |
| 91 | Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes: - |
| 92 | 4 sq mm |
| 93 | 6 sq mm |
| 94 | 10 sq mm |
| 95 | 35 sq mm |
| 96 | Cleaning of existing ceiling fan/luminaries. |
| 97 | Dismantling charges of old materials handed over to the concerned authority including ceiling fan, regulator, TL fittings, cables & other wiring materials etc. as per direction of the site engineer-in-charge L.S. |
| 98 | Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:- |
| 99 | Supplying and fixing of following Cable tray made of hot dip galvanised iron:- |
| 100 | 105mm x 150mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender