Tender For Periodical Cleaning Of Intake Well/Jack Well For Smooth Running Of Diferent Surface Water Treatment Plants And Innovative Schemes Under Dws Sub-Division Dasda During The Year 2026-27
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
2 days left
EMD
19413
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Cleaning Of Intake Well/Jack Well For Smooth Running Of Diferent Surface Water Treatment Plants And Innovative Schemes Under Dws Sub-Division Dasda During The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Pumping out water by Diesel engine Pump as per Specification of E-I-C. |
| 2 | Labour charge for taking out carefully clay silt etc from Intake well minimum lift 15.00 mtr and lift upto 50.00 mtr i/c cleaning the complete as per direction of the Engineer in charge. |
| 3 | Labour charge for taking out carefully the clay soil (clotted) from the back wash channel, Clarifloculator including pumping out water by diesel engine pump & cleaning the complete as per direction of the Engineer in charge. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil |
| 5 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared |
| 6 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level: |
| 8 | 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size) |
| 9 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge: |
| 10 | With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 11 | Supplying bamboo (1st class) 85 mm to 100 mm dia and making shoe with end tappered upto 300 mm from the bottom of the bamboo as per drawing and specification. |
| 12 | Handling and driving bamboo (1st class) 85 mm to 100 mm dia upto the length required by heavy hammer as per drawing and specification |
| 13 | Providing and fitting, fixing bamboo (1st class) 85 mm to 100 mm dia for horizontal, diagonal bracing, strut etc. with nails / spikes and binding wire (GI 2.0 mm) as per drawing and specification |
| 14 | Providing and placing gunny/ polythene (of minimum wall thickness of 500 micron) bags filled with sand (of minmum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification. |
| 15 | Providing and fixing muli bamboo plain oven tarja walling in compound fencing, strengthening with single split bamboo battens ( both side ) at 450 mm centre to centre and tied with G.I. wire 1.0 mm complete as per specification. |
| 16 | Providing and Installation of 53.00 mtr head water lubricated submerssible pump (Raw) Water with 3 ph. 415 V AC Motor with star delta connection along with PVC insulated 3 core flat copper cable conforming to relevant IS code for submerssible motor with all necessary equipments and fittings as required upto the depth of 6.10 mtr (Maximum) by GI pipe (conforming to IS 1239 medium class) with tailpiece as required welded with GI flange in/c providing fitting fixing by necessary rubber washer, nuts and bolts, MS safety clamp etc. as per required size and making necessary electrical connection with Main Switch/Starter with motor in/c commissioning and trial run as per direction of the E-I-C.(each pump with motor shall consist of stainless steel impeller conforming to relevant BIS Code pump make DUKE/KSB/WPIL/TEXMO/CRI)(Pump set, cable, GI pipe of medium class for colum assembly etc will be supplied by the agency at his cost and for main switch/Starter payment will be done seperately). ii) 15000 GPH capacity with 80mm dia GI pipe and 10 mm thick GI flange Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender