Tender For Running Maintenance Of Various Water Supply Scheme Under Matabari Block/ Sh:- maintenance Of Pipe Line, Electrical Equipement & Providing Drinking Water Facility At Various Gp/Vc Within Matabari Rd Block Under Dws Sub-Division No.- Ii Duri
Tender Value
4.75 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
2 days left
EMD
9515
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gomati → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Running Maintenance Of Various Water Supply Scheme Under Matabari Block/ Sh:- maintenance Of Pipe Line, Electrical Equipement & Providing Drinking Water Facility At Various Gp/Vc Within Matabari Rd Block Under Dws Sub-Division No.- Ii During The Financial Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Labour for removal of deposited iron foregin materials from existing PVC pipe line by chain led pully system attached with required dia of cutter etc. in/c necessary earth excavation dismantaling cutting relaying and jointing of pipes by making pvc coupler and solvent cement and refilling of earth etc complete as per direction of Engg -in- charge. ( pin point for cutting PVC pipe line will be as per direction of the Eng-in -charge and as per actual site condition and necessary pipe for amking coupler and solvent cement, will be issued by the dept. of free of cost) |
| 2 | Charges for repairing of leakage in UPVC / HDPE pipe line with PVC coupler & solvent cement etc. including necessary earth excavation, backfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. complete as per specification & direction of the Engineer-in-charge. |
| 3 | i) 90 mm OD |
| 4 | ii) 110 mm OD |
| 5 | iii) 140 mm OD |
| 6 | Providing and laying of flexible PVC pipe(cinfirming to IS 7634) complete as per specification and direction of the Engineer-in Charge (fittings will be paid separately. |
| 7 | a) 15 mm dia |
| 8 | Providing and fixing U.P.V.C. service saddle as per CPWD specification and direction of the Engineer - in - charge. |
| 9 | iii) 90 mm dia with 15 mm dia opening |
| 10 | iv) 110 mm dia with 15 mm dia opening |
| 11 | v) 140 mm dia with 15 mm dia opening |
| 12 | Providing and fixing brass ferrule with C.I. cover conforming to IS : 2692 including boring and tapping the main as per chapter 20 of CPWD specification and direction of the Engineer - in - charge. |
| 13 | ii) 15 mm nominal bore |
| 14 | Providing and fixing G.I. union as per CPWD specification and direction of the Engineer-in-charge. |
| 15 | a) 15 mm dia |
| 16 | Providing and fitting fixing PVC/plastic bib cock conforming to IS: 9763 in hydrant points at different location as per specification and direction of the Engineer-in-charge. |
| 17 | a) 15 mm dia PVC/plastic bib cock |
| 18 | Providing, fixing and laying fabricated UPVC socket / coupler conforming to IS : 10124 ( Part 2 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. |
| 19 | i. 90 mm dia |
| 20 | ii. 110 mm dia |
| 21 | iii. 140 mm dia |
| 22 | Providing and fitting fixing of single phase motor starter panel unit 3.0HP capacity comprising with 2 plate conductor,over load relay,capacitor,volt meter of BCH/L&T make with necessary copper wire etc complete as per direction of the Engineer-in-Charge. |
| 23 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. A. External work. ii) 40 mm dia. nominal bore |
| 24 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter (3 ph. 50 Hz, 415V in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.i) 35HP/26KW Relay Range within 20-32 +10% |
| 25 | Excavation trenches of required width for pipes , cables, etc. in/c. excavation for sockets , dressing of sides where required , ramming of bottoms , depth upto 1500 mm in/c. getting out the excavated soil and backfilling of soil as required after laying of pipeline , in layer not exceeding 200 mm in depth in/c. cosolidating of surplus excavated soil with all required leads as per chapter -2 of CPWD specification and direction of the Er. -in -Charge.................... A) For UPVC pipe in new work ............ a. In all kinds of soil. i) For pipes not exceeding 90 mm dia |
| 26 | Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conforming to IS : 10124 ( Pt-II ) with solvent cement conforming to IS : 14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. A) Class - 3 ( working pressure 6.0 kg / cm2) i) 90 mm dia OD Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender