Tender For Repairing And Renovation Of Interior Decoration Works Of Administrative Cum Guest House Building Of Birbhum Zilla Regulated Market Committee At Principal Market Yard, Bolpur
Tender Value
29.88 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
4 days left
EMD
59765
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Birbhum → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Renovation Of Interior Decoration Works Of Administrative Cum Guest House Building Of Birbhum Zilla Regulated Market Committee At Principal Market Yard, Bolpur
BOQ
| Sl. No. | Item Description |
| 1 | FALSE CEILING Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having ..... jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3):1996 (Boards with BIS certification marks) |
| 2 | CUPBOARD/ TABLE/ TV PANNEL/ WALL PANNELProviding and fixing cupboard shutter with 19mm thick one sidem decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately |
| 3 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in charge |
| 4 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : |
| 5 | Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. |
| 6 | Stainless steel roller for sliding arrangement in racks/ cupboards/ cabinets shutter |
| 7 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75MM |
| 8 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws |
| 9 | Providing and fixing bright finished brass handles with screws etc. complete:100MM |
| 10 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. TRIPLE STRIP VERTICAL TYPE |
| 11 | UPVE SLIDING WINDOWSuPVC extruded range R4 2 track sliding window/ door frame size (64 mm & above) x (45 mm & above) metre 424.00 |
| 12 | uPVC extruded range R4 sliding window sash size (44 mm & above) x (55 mm & above) |
| 13 | Labour for fabrication of uPVC extruded casement/ sliding windows and doors including drilling holes, fixing of fittings & hardwares, hire charges of drill machine and electricity charges etc. |
| 14 | Labour for installation of uPVC extruded casement/ sliding windowsand doors including scaffolding |
| 15 | EPDM Gasket for uPVC window/door |
| 16 | Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete. |
| 17 | Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. |
| 18 | Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) |
| 19 | Modification of estimated cost for GST correction: Factor 0.973 on DSR 2023 vide file no. 158/SE(TAS)/GST/2024/02-E dated 8/8/2024 of the SE(TAS), CPWD |
| 20 | Add cost index over DSR 2023 @ 9% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender