Tender For Renovation Work Of Puillya Pump House , Under Ward No. - 46 Of H.M.C.
Tender Value
1.64 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
19 days left
EMD
3294
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Work Of Puillya Pump House , Under Ward No. - 46 Of H.M.C.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling R.C. floor, roof, beams etc. Including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof.[Ref : P.W.D.(Bldg) 2017, Page - 10, Item-3(a)] |
| 2 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.][Ref : P.W.D.(Bldg) 2017, Page - 11, Item-10] |
| 3 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof)(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work[Ref : P.W.D.(Bldg) 2017, Page - 42, Item-36(c)] |
| 4 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m(i) Tor Steel/HYSD bars/ TMT bars(SAIL/TATA/RINL)Rate Analysis Enclosed |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety In Ground FloorRate Analysis Enclosed |
| 6 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor[Ref : P.W.D.(Bldg) 2017, Page - 16 Item-16 &3rd Corrigenda, Page - 3 Sl. No.-8] |
| 7 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).A) With 1:4 cement mortara) Outer wall 20mm thick plaster In ground floor[Ref : P.W.D.(Bldg) 2017, P-189 I-1(ii)(a) & 3rd corrigenda, dt.-04.06.2018, P- 50, Sl. No.- 1] |
| 8 | b) InSide Wall, 15mm th. In Ground Floor[Ref : P.W.D.(Bldg) 2017, P-189 I-1(ii)(b), & 3rd corrigenda, dt.-04.06.2018, P- 50, Sl. No.- 1] |
| 9 | b) Ceilling, 10mm th. In Ground Floor[Ref : P.W.D.(Bldg) 2017, P-189 I-1(ii)(c), & 3rd corrigenda, dt.-04.06.2018, P- 50, Sl. No.- 1] |
| 10 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. [Ref : P.W.D.(Bldg) 2017, Page -192 Item-15] |
| 11 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(d) Sal : Local.In Ground Floor[Ref : P.W.D.(Bldg) 2017, Page -114, Item-1(d)] |
| 12 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) i) Water based interior grade Acrylic Primer (b) Two Coats [Ref: P.W.D.(Bldg.). Page- 196, Item-7.(b).(i)] |
| 13 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.Two CoatsIn Ground Floor [Ref : P.W.D.(Bldg) 2017, Page -196, Item-10] |
| 14 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.In Ground Floor:b) Two CoatsIn Ground Floor[Ref : P.W.D.(Bldg) 2017, Page -196 Item-8] |
| 15 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primera) Normal Acrylic EmulsionGround Floor[Ref : P.W.D.(Bldg) 2017, Page -197, Item-17] |
| 16 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.[Ref : P.W.D.(Bldg) 2017, Page -200 Item-1(b)] |
| 17 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary(a) On timber or plastered surfaceWith super gloss (hi-gloss) -(iv) Two coats (with any shade except white)[Ref : P.W.D.(Bldg) 2017, Page -200, Item-2(a)(iv)] |
| 18 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia.[Ref : P.W.D.(Bldg) 2017, Page -212, Item-21, A(ii)] |
| 19 | c) Bend 87.5 degree(ii) 110 mm. Dia[Ref : P.W.D.(Bldg) 2017, Page -213, Item-21, B(c)(ii)]. |
| 20 | d) Shoe(ii) 110 mm. Dia.[Ref : P.W.D.(Bldg) 2017, Page -213, Item-21, B(d)(ii)] |
| 21 | Add GST |
| 22 | Add 1 % Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender