Tender For Construction Of path work With Slab And Allied Work Near Shamshan Ghat W No.7 Pyt Sool Pyt Sool, Block Panthal, Distt.- Reasi, Under Capex Pri Grant For The Year 2026-27.
Tender Value
1.50 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
5 days left
EMD
3000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of path work With Slab And Allied Work Near Shamshan Ghat W No.7 Pyt Sool Pyt Sool, Block Panthal, Distt.- Reasi, Under Capex Pri Grant For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplusexcavated earth as directed:Descripti All Kind of Soil |
| 2 | P/L dry stone aggregates |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Centring and shuttering including strutting propping etc and removal of formwork for: foundation footings,bases of columns etc for mass concrete. |
| 5 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2.2 Welded |
| 6 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side ofthe sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 8 | Chain link fabric fancing mesh of size 25x25 mm made of sqm 385.00G.I. wire of dia 3mm |
| 9 | Providing and laying of boulders apron laid in wire crates with 4mm dia Gl wire conferming to IS 280 and IS 4826 in 100mm x 100mm mesh (Woven Diagonal) including 10% extra for laps and joints weighing not less then 25kg each as per drawing and technical specification clause 1301 including all leads, lifts and rehandling and including cost of wire crates complete. |
| 10 | Construction of CIB (includes complete pedestal/ brick size 3' X 2' , plastering, painting all complete job as per directions of engineer in-charge) |
| 11 | Carriage ofCement 5.00(upto) KM by M.T. and 100 mtr. AT |
| 12 | Carriage of Sand & agg 15(upto) KM by M.T . And 100 Mtr. AT |
| 13 | Carriage of stone 0(upto) KM by M.T . And 100 Mtr. AT Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender