Tender For Work On The Underground Electrical System At Maheva Junction In The Naini Area Of Prayagraj.
Tender Value
2.09 Crore
Estimated cost
Bid Submission
05 Nov 2026
6 days left
EMD
4.20 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work On The Underground Electrical System At Maheva Junction In The Naini Area Of Prayagraj.
BOQ
| Sl. No. | Item Description |
| 1 | S/F of factory fabricated and wired metal Glande dust & vermin proof floor mounting distribution TPN feeder pillar with incoming 400 Am. 1 Nos MCCB and outgoing 200 Amp 2 Nos. = 63 Amp 1 Nos cubical type with requiredd busbar as IS 8623 with Insulated Heat Shrink sleeving and mouting on non Hygrscotic suport as CMC/BMC. With 3 No indicator, The Pillar should be fabricatedwith CRCA sheet 2 mm thick Paintedwith High quality Pint with locking arrangement complete with cable Gland complete. |
| 2 | S/F of 200 Amp Busbar Box made of 16 SWG CRCA Sheet including TPN Aluminium Busbar complete with locking arrangement with required Clamps nuts & bolts and grouting / .Fixed on Wall (if required on Angle stand angle will be measured in MS Items) |
| 3 | S/F of TPN/ Telex Feeder Pillar Cubical Box made of 45mm x 45mm x 5mm Angle Iron frame and 14 SWG MS Sbheet with Both side Lockignarrangement. Dust and Vermin Proof consisting with Copper Bus Bar on Henry type Fuse unit on 2 No. 500 Amp and 3 No. 300 Amp. Tailless unit Completethe Box shall be Painted with approvedaluminium Paint over Red Oxide Primer in 1:3:6 CC foundation as directed by E/I ( PSR in PDA). |
| 4 | S/L of Aluminiuum conductor PVC Insulated armoured served sheathed 400Sq mm x 3.5 Core LT cable 1100 volts grade at a deopth of 750mm below groundlevel over a cushion of 756 mm. Thick sand all around and protectedwith burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable sie or as directed by the E/I, complete |
| 5 | Same as Above but size 240 Sq mm x 3.5 Core |
| 6 | Same as Above but size 120 Sq mm x 3.5 Core |
| 7 | Same as Above but size 50 Sq mm x 3.5 Core |
| 8 | Same as Above but size 16 Sq mm x 4 Core |
| 9 | S/L of 3 Core standard aluminium conductor XLPE (Cross linked Polyethylene) insualted PVC bedded, Galvanied flat steel strip armored 185 Sqmm 3 Core 11 KV grade cable confirming to I.S. 7098 ( Part-II with latest amendement) at a depoth of 900 mm below ground level ovdr a cushion of 100 mmthick fine rriver. sand al around and protected with well burnt bricks in sides and on top purt across. The armoring of cable shall be properly connected with earth conductorby clamps etc. |
| 10 | S/F of 185 Sq mm 11 KV Joint Kit/Straight through complete. Rate PSR |
| 11 | S/F of 185 Sq mm 11 KV Joint Kit/Out door complete. Rate PSR |
| 12 | S/F of 400 Sq mm cable Lugs (Item as UPPWD SOR 18) |
| 13 | S/F of 240 Sq mm cable Lugs (Item as UPPWD SOR 18) |
| 14 | S/F of 120 Sq mm cable Lugs (Item as UPPWD SOR 18) |
| 15 | S/F of 50 Sq mm cable Lugs (Item as UPPWD SOR 18) |
| 16 | S/F of 16 Sq mm cable Lugs (Item as UPPWD SOR 18) |
| 17 | Trenchles Drilling with HDPE 150 mm in 33 KV/100 mm in 11 KV & LT dia HDD for carring of Cable on Road Crosing complete with Repairing of all internal water connection/Sever Connection if necessary complete |
| 18 | Dismantling & Store /Street light Poles /PCC/Rail as per direction of UPPCL with Loading unloading cartage of Pole embedded in brick ballast & CC foundation etc. as required. |
| 19 | Dismantling of over head lines Wires/ ABC comprising of copper/aluminium overhead conductor, G.I, wire, cross arms, insulators etc, as Required & Deposite as per direction of UPPCL with Loading unloading cartage of all material with proper listing. |
| 20 | S/F Steel tubualr Pole 9 M. Long designated 410 SP-32 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. |
| 21 | S/F Steel bubular Pole 11 M. long designated 410 SP/55 in 1:3:6 cement concrete foundation including excavation back fillingetc. Complete in allrespect. Rate based on S.I. No. 613/2018 on Weight basis |
| 22 | S/F of MS Channel, V shape, Bracing, Angel, Clamps and other required MS Iron Items etc. Rate PSR |
| 23 | S/F of 100 mm x 110 mm shackle insulator or 100 mm x 80 mm Pin insulator including G.I. Bolts/spindle nuts etc. |
| 24 | S/f of 11 KV Pin insulator complete with Pin, Nuts, & Bolts complete with Gun fiting complete. |
| 25 | S/E of overhead line with ACSR conductor on Poles/service brfackwet including binding etc. complete in all respect. |
| 26 | S/E of overhead line with GI Wire 8 to 4 SWG on poles/service bracket including binding etc. |
| 27 | S/E of Stay set at least 3.5 M. away from the Pole complete with galvanised 19 mm diax 1.80. M. long Sary clamps, stay insulator 19 mm x 600 double screw tightener, 7/4.00 mm G.I. stary wire etc. in 1:3:6; cemtn concrete complete . |
| 28 | Painting of the electric pole with 2 coats of aluminium paint over red primncer complete in all respect. |
| 29 | S/F of 100 mm dia GI Pipe Clas B Make Jindal Complete with required clamping . |
| 30 | S/F of 150 mm dia GI Pipe Clas B Make Jindal Complete with required clamping . |
| 31 | Removal and Refixing of service Connections complete as per direction of E/I. |
| 32 | S/Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. Rate SOR-18 |
| 33 | Deduction of Cable Rate during errection in Pipe/Duct ( Duct will be made by civil work Estimate) |
| 34 | Supply & Fixing of 9 Mtr GI Octagonal Pole of approved make ( top dia 70mm, Bottom dia 135 mm and base plate 12mm, thik) having 3mm thikness with single arm bracket ( 1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T & p completee in all respect. |
| 35 | Supply and fixing of LED Street light Fitting having die cast alauminium body and diffuser with drivder set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect. |
| 36 | S/F of followign capacity of Automatic street light cubicle control Panel painted with anti corrosive alkeli and acie proof paint considting of tme switch TSO 100 serive/Digital type with Contactors, HRC fuses, 100 Amp MCCB isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complte |
| 37 | S/f of 11 KV Disc insulator complete with Fittings , Nuts. & Bolts complete with Gun fitting complete ( PSR in PDA) |
| 38 | S/L of 6 Sq mm Twin Flate unarmoured cable complete with proper connections |
| 39 | Supply & Erraceton of factory fabricated & wired metal clad dust and wermin proof floor mounting. M.S Channel Base with bottom and top cable entreis Incoming, 100 Amp MCCB-1No. Outgoing 63 AMP MCCB-2Nos Electrical control panel with TPN MCCB's ) Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamberetc. complete in all respects The instrument chambdr shall be separate and shall comprisee of flush type digital metering system for phase to phase voltabe and single phase voltage, current and other parameters ) KVA, P.F,KW etc) in each phase with toubh type selector switches for difernet readings. instrument fuses, curnet transformer etcf. T |
| 40 | Supply & laying of following 50 mm dia (OD-50 mm nominal) DWC HDPE pipe 6 Kg ISI marked alongwith all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Ii complete with fitting and cutting. Jointing etc, direct in groudn (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. copete as required. |
| 41 | Same as above 90 mm dia (OD-90 mm & ID-76 mm nominal) 6 Kg ISI marked alongwith all accessories |
| 42 | SITC of TPMO Set and DO Fuse Set 11 Kv with Handle clamps nuts bolts and required Fuse complete in all rerspect Rate UPPCL 2017-18 |
| 43 | S/L of 110mm Dia HDPE pipe having pressure rating 6sqr mm ( PN-6), Grade PE 100 |
| 44 | S/F of wire mesh Fencing with 2 Mtr high cage fabricated with 3 mm thick expended matal fixed on 50x50x6 mm angle frame having vertical spaced at 1 Mt and horizental spaced 1 Mtr. With 2000x1000 mm size door leaf frame 35x35x6 mm and vertical grouting at a depth of 300 mm complete. Rate SOR 2018 |
| 45 | S/C of Transformer Plinth 1.25x1.25 Meter x 2.3 Meter hight full brick work with 30 Cm foundation and 15 Cm hight CC in 1:3:6 on Top with surface plastering and white wash complete Rate PSR Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender