Tender For Work Regarding The Strengthening Of The Underground Power Line And The Provision Of Lighting Facilities On Shambhu Barrack Road, Running Alongside Gate No. 08 Of The Honble High Court.
Tender Value
1.81 Crore
Estimated cost
Bid Submission
05 Nov 2026
6 days left
EMD
3.64 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Regarding The Strengthening Of The Underground Power Line And The Provision Of Lighting Facilities On Shambhu Barrack Road, Running Alongside Gate No. 08 Of The Honble High Court.
BOQ
| Sl. No. | Item Description |
| 1 | S/F of factory fabricated and wired metal Glande dust & vermin proof floor mounting distribution TPN feeder pillar with incoming 400 Am. 1 Nos MCCB and outgoing 200 Amp 2 Nos. = 63 Amp 1 Nos cubical type with requiredd busbar as IS 8623 with Insulated Heat Shrink sleeving and mouting on non Hygrscotic suport as CMC/BMC. With 3 No indicator, The Pillar should be fabricatedwith CRCA sheet 2 mm thick Paintedwith High quality Pint with locking arrangement complete with cable Gland complete. (UPPWD-S.I.No.813b/2018) |
| 2 | S/F of TPN/ Telex Feeder Pillar Cubical Box made of 45mm x 45mm x 5mm Angle Iron frame and 14 SWG MS Sbheet with Both side Lockignarrangement. Dust and Vermin Proof consisting with Copper Bus Bar on Henry type Fuse unit on 2 No. 500 Amp and 3 No. 300 Amp. Tailless unit Completethe Box shall be Painted with approvedaluminium Paint over Red Oxide Primer in 1:3:6 CC foundation |
| 3 | S/F of 200 Amp Busbar Box made of 16 SWG CRCA Sheet including TPN Aluminium Busbar complete with locking arrangement with required Clamps nuts & bolts and grouting |
| 4 | S/L of Aluminiuum conductor PVC Insulated armoured served sheathed 400Sq mm x 3.5 Core LT cable 1100 volts grade at a deopth of 750mm below groundlevel over a cushion of 756 mm. Thick sand all around and protectedwith burnt bricks on sides and on top. |
| 5 | Same as Above but size 240 Sq mm x 3.5 C |
| 6 | Same as Above but size 120 Sq mm x 3.5 C |
| 7 | Same as Above but size 50 Sq mm x 3.5 C |
| 8 | Same as Above but size 16 Sq mm x 4 C |
| 9 | S/L of 3 Core standard aluminium conductor XLPE (Cross linked Polyethylene) insualted PVC bedded, Galvanied flat steel strip armored 185 Sqmm 3 Core 11 KV grade cable confirming to I.S. 7098 ( Part-II with latest amendement) at a depoth of 900 mm below ground level ovdr a cushion of 100 mmthick fine rriver. sand al around and protected with well burnt bricks in sides and on top purt across. |
| 10 | S/F of 185 Sq mm 11 KV Joint Kit complete. |
| 11 | S/F of 400 Sq mm cable Lugs |
| 12 | S/F of 240 Sq mm cable Lugs |
| 13 | S/F of 120 Sq mm cable Lugs |
| 14 | S/F of 50 Sq mm cable Lugs |
| 15 | S/F of 16 Sq mm cable Lugs |
| 16 | S/L of 3 Core 300 Sqmm 33 KV standard aluminium conductor XLPE (Cross linked Polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) 33KV grade at a depth of 1100 mm below ground level over a cushion of 100 mm thick fine river. sand all around and protected with well burnt bricks n sides and on top put across. |
| 17 | S/F of 3 Core standard aluminium conductor XLPE 33KV grade Jointing Kit |
| 18 | Trenchles Drilling with HDPE 150 mm in 33 KV/100 mm in 11 KV & LT dia HDD for carring of Cable on Road Crosing complete with Repairing of all internal water connection |
| 19 | Dismantling & Store /Street light Poles /PCC/Rail as per direction of UPPCL with Loading unloading cartage of Pole embedded in brick ballast & CC foundation etc. |
| 20 | Dismantling of over head lines Wires/ ABC comprising of copper/aluminium overhead conductor, G.I, wire, cross arms, insulators etc, as Required & Deposite as per direction of UPPCL |
| 21 | S/F of Steel tubualr Pole 9 M. Long designated 410 SP-32 in 1:3:6 cement concrete foundation including excavation back filling etc. complete |
| 22 | S/F of Steel bubular Pole 11 M. long designated 410 SP/55 in 1:3:6 cement concrete foundation including excavation back fillingetc. Complete |
| 23 | S/F of MS Channel, V shape, Bracing, Angel, Clamps and other required MS Iron Items |
| 24 | S/f of 11 KV Pin insulator complete with Pin, Nuts, & Bolts complete with Gun fiting comp |
| 25 | S/f of 11 KV Disc insulator complete with Fittings , Nuts. & Bolts with Gun fitting |
| 26 | S/E of overhead line with ACSR conductor on Poles/service brfackwet including binding etc. |
| 27 | S/E of overhead line with GI Wire 8 to 4 SWG on poles/service bracket including binding |
| 28 | S/E of Stay set at least 3.5 M. away from the Pole complete with galvanised 19 mm diax 1.80. M. long Sary clamps, stay insulator 19 mm x 600 double screw tightener, 7/4.00 mm G.I. stary wire etc. in 1:3:6; cemtn concrete complete . |
| 29 | Painting of the electric pole with 2 coats of aluminium paint over red primncer complete |
| 30 | Earthing of pole by MS earthing rod of 20x2500mm and 6 SWG earthing wire etc |
| 31 | S/F of 100 mm dia GI Pipe Clas B Make Jindal Complete with required clamping . |
| 32 | S/F of Dead End Insulated Clamps complete |
| 33 | S/E of Suspension Insulated Clamps complete |
| 34 | R/R of service Connections complete |
| 35 | S/Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 36 | Deduction of Cable Rate during errection in Pipe/Duct |
| 37 | S/F of 9mtr. Decorative Steel Pole are made out of galvanized Mild Steel tubes Bottom Dia 195mm middle dia 114mm & top dia 76mm with die cast aluminium Base and Decorative middle part as per drwing with Decorative Single arm Bracket as per DWG & 120w LED CLIPPER Hanging Fitting as per DWG With foundation bold and all stalation on site as per direction E/I |
| 38 | S/F of followign capacity of Automatic street light cubicle control Panel painted with anti corrosive alkeli and acie proof paint considting of tme switch TSO 100 serive/Digital type with Contactors, HRC fuses, 100 Amp MCCB isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complte |
| 39 | S/L of 6 Sq mm Twin Flate unarmoured cable complete with proper connections |
| 40 | Supply & laying of following 50 mm dia (OD-50 mm nominal) DWC HDPE pipe 6 Kg ISI marked alongwith all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Ii complete with fitting and cutting. Jointing etc, |
| 41 | Same as above 90 mm dia (OD-90 mm & ID-76 mm nominal) 6 Kg ISI marked alongwith all accessories |
| 42 | S/L of 110mm Dia HDPE pipe having pressure rating Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender