Tender For Interior Work Of Othaka Branch And Atm

Sharing tender

Tender For Interior Work Of Othaka Branch And Atm A Partition Work., 1(A) B Fully Height Partition (Semi Glazed) Providing And Fixing In Position Partly Glazed Full Partition Work As Per Drawing ,In Frame Work At 2X2 Grind (Horizontally And Vertically) Comprising Of 2X1 Hevy Gazed Almunium Section And/Or As Per Frame Work Shown In The Drawings With 9 Mm Plywood (Conforming Isi 710 ) On Both Sides Finished With 1 Mm Thick Laminates Of Approved Shade And Colour As Shown In Drawings. Item To Include 12 Mm Thick Glass With Chemical Eachingas Per Design And Fitted With 3-1/4 Thick Beach Wood Beading And 2X2 T.W. Member For Door Sides. All Exposed T.W / Beading Surfaces To Be Finished In Melamine Polish As Directed Including All Necessary Stainless Steel Finish Fittings/Hardware And Wood Preservative Paint Etc. As Per List Of Approved Material And As Approved By The Project Consultant/Bank Complete In All Respects. (Note: In Case Of False Ceiling, The Vertical Members To Be Fixed With Pucca Ceiling But The Area Of Partition Payable Will Be Below The False Ceiling Only) Low Height Partition (Semi Glazed) Providing And Fixing In Position Partly Glazed 4-0 Hт. Partition Work As Per Drawing, In Frame Work At 2X2 Grind (Horizontally And Vertically) Comprising Of 2X1 Hevy Gazed Almunium Secțion And/Or As Per Frame Work Shown In The Drawings With 9 Mm Plywood (Confermin Isi 710 ) On Both Sides Finished With 1 Mm Thick Laminates Of Approved Shade And Colour As Shown In Drawings. Item To Include 12 Mm Thick Glass With Chemical Eaching As Per Design And Fitted With 3-1/4 Thick Beach Wood Beading At Glass Sides All Exposed Wood. Surfaces To Be Finished In Melamine Polish Of As Directed Including All Necessary Stainless Steel Finish Fittings/Hardware And Wood Preservative Paint Etc. As Per List Of Approved Material And As Approved By The Project Consultant/Bank Complete In All Respects. C Partition (Cement Board Partition.) Providing And Fixing Both Side Solid Partition Using Framing And Laminate As Per Details Mentioned In Si. No.1 (A). The Skin Of The Partition Shall Be Made Out Of 10Mm Thick Cement Fiber Board And Finished With 1Mm Thick Laminate Of Approved Shade And Scheme On The Customer Side (Visible To Customers) And 2 Coats Of Ivory White Enamel Paint On The Internal Side (Not Visible From The Customer Lobby).The Work Should Be Completed In All Labour And Materials. Etc.