Tender For Special Repair To Bldg No P-26 (Ap-254) And T-15 (30 Punjab) And T-54 (Bg) Under Ge 881 Ews
Tender Value
48.93 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
2 days left
EMD
97860
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-26 (Ap-254) And T-15 (30 Punjab) And T-54 (Bg) Under Ge 881 Ews
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Oct-2026 | CORRIGENDUM | BOQ | 02-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: Spl REPAIR TO BLDG NO P-26 (AP-254) AND T-15 (30 PUNJAB) AND T-54 (BG) UNDER GE 881 EWS Contract No : GE/PNH-69/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete (unreinforced) of any description and in any position,complete all as specified and directed. |
| 3 | 100 mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in sub base of path/hardstanding and finished with surface even and fair, complete all as specified and directed. |
| 4 | 75 mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including providing and filling of joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 5 | 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor and finished with surface even and fair, complete all as specified and directed. |
| 6 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 7 | Vitrified Ceramic tiles 8-9 mm thick area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4,complete all as specified and as directed by Engr-in-Charge |
| 8 | Description all as per item No 06 above but as in vertical surface in skirtings,dados including 10 mm thick rendering as back coat in CM 1:4, complete all as specified and as directed by Engr-in-Charge |
| 9 | Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 10 | Glazed ceramic coloured tiles of size 600mmx 300mm x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering as back coat in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 11 | Descriptiopn all as per item No 09 above but on skirting, including 10 mm thick back coat in CM 1:6 complete all as specified and as directed by Engr-in-Charge |
| 12 | 18-20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and and moulding the edges, complete all as specified and directed. |
| 13 | Green marble work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) 15 mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 14 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 15 | Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410W(Gde E-250), quality 'B' complete all as specified and directed. |
| 16 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 17 | 4mm thick non asbestos fiber board of size 600mmx600mm fixed or laid/inserted to power coated GI frame work grid size 605x605mm and including 4mm dia GI wire as suspender at every 1200mm c/c of required length fixed in RCC roof/truss and etc and complete all as specified and directed by Engr-in-Charge. |
| 18 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified & directed. |
| 19 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 20 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 21 | Dismantling of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 22 | Walling of random rubble stone masonry uncoursed , well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed. |
| 23 | All as per Ser item No 21.00 here-in-before but except stones, using old stones after cleaning. |
| 24 | Precast cement concrete (1:2:4) type-B-0 (using 12.5mm graded crushed stone aggregate) as in louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame and set in CM (1:4), complete all as specified and directed. |
| 25 | Precast cement concrete 1:3:6, type-C 1 (using 20mm graded crushed stone aggregate) as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 26 | Taking down cement plaster from brick or stone walls hacking for keys & scrubbing down with water including raking of joints etc complete all as specified and directed. |
| 27 | Raised pointing to random rubble stone masonry, or polygonal rubble, uncoarsed or brought upto courses in cement mortar 1:4, complete all as specified and directed. |
| 28 | Rendering 10mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar 1:6 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 29 | Rendering 15mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement including mixing of water proofing compound complete all as specified and directed.( NOTE: Supply only water proofing compound shall be measured and paid separately) |
| 30 | Preparation of newly plastered or unplastered surface of wall and applying two coats of cement base paint in camouflage pattern over a coat of Primer complete all as specified and directed. Note:- Camouflage pattern shall be approved by Engineer in charge. |
| 31 | Preparation of newly plastered or unplastered surface of wall and applying two coats of Oil Bound Distemper (any tint) over a coat of primer including 2mm thick wall care putty complete all as specified and directed. |
| 32 | Preparation of old plastered or unplastered wall surfaces including washing,scrubbing down and stopping of distermperd surfaces and applying two coat of oil bound distemper, complete all as specified and directed. |
| 33 | Applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide zinc chrome primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed. |
| 34 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and directed. |
| 35 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed. |
| 36 | Anodised aluminium door shutters frame for glazed/ panelled shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified & directed.Note :- Glazing & panel inserts shall be measured and paid for separatly. |
| 37 | Sheet glass ordinary quality, 5.5mm thick, glazing with rubber neoprene packing to aluminium frame in squares exceeding 0.50Sqm in each pane fixed in repairs, complete all as specified & directed. |
| 38 | Prelaminated particle board, 9mm thick, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified & directed. |
| 39 | 100mm mortice lock, vertical type with 4 lever fixed, complete all as specified and directed. |
| 40 | Door closer hydraulically regulated (Aluminium extruded section body) , designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repairs,complete all as specified and directed. |
| 41 | Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each, complete all as specified and directed. |
| 42 | 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified & directed. |
| 43 | Stainless steel wire cloth 0.36 nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified & directed. |
| 44 | Mild steel butt hinges, medium weight, cold rolled,100mm long fixed, complete all as specified and directed. |
| 45 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 46 | Extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 47 | 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 48 | S&F in repair floor door stopper of aluminium alloy body with over all length of cover plate of 140mm and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 49 | Stainless steel decorative curtain rod 25mm dia with decorative head on both end of rod and necessary clamps / fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 50 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 51 | Factory made solid panel PVC door shutter 30mm thick(Stiles) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded plain coloured PVC,C, channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame with 3 Nos stainless steel hinge 100 mm size, welded/sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement. S&F in the frame as per manufacturer's instructions complete all as specified and directed. |
| 52 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 53 | Steel water tubing of 15 mm dia bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.. |
| 54 | Taking up or down steel tubing of 20mm dia bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed. |
| 55 | Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 56 | 1000 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old unserviceable water tank of any description, complete all as specified and directed. |
| 57 | S&F in repair vitreous China wash down water closet pan (pedestal pattern),white (excluding fixing bolt,flushing cistern and flushing pipe) complete all as specified & directed. |
| 58 | S&F in repair PVC valve less, symphonic action type flushing cistern 10 ltrs capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified & directed. |
| 59 | Vitreous china wash hand basin, white , flat back, size 550 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 60 | Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 61 | S &F in repair 15mm bore pillar tap fancy type cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule complete, all as specified & directed. |
| 62 | 15mm bore Stop valve cast copper alloy chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and directed. |
| 63 | 15mm bore Stop valve two way cast copper alloy chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and directed. |
| 64 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified & directed. |
| 65 | S & F in repair Stainless Steel Wall Mounted Case with Soap Holder & Brush Holder fixed to wall all as specified and directed by Engr-in-Charge. |
| 66 | S&F in repair 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws, complete all as specified and directed. |
| 67 | S&F in repair chromium plated brass wall mixer fancy type with provision for overhead shower complete with wall flange (excluding over head shower) screwed down for 15 mm GI bore pipe complete all as specified and directed. |
| 68 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified directed. |
| 69 | S & F in repairs flexible waste pipe for wash hand basin fitted to Wash Hand Basin incl all necessary brackets etc all as specified and directed by Engr-in-Charge. |
| 70 | PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed, complete all as specified and directed. |
| 71 | S&F in repair waste coupling, 32mm dia of PTMT (half or full threaded)( minimum weight 32mm-45gm/40mm-60gm) complete all as specified and directed. |
| 72 | S&F in repair Wall mounted corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf of 12cm wide with cromium plated bracket guard and railing 60cm long and fixed in position complete in all respect as specified & directed. |
| 73 | 18 mm thick factory made PVC two side pre laminated sheet for kitchen cabinet shutter/cupboard shutter. 18 mm thick sheet shutter bent at 90 degree and finish all edges at level for making edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding etc and all cutting and fittings. Sheet colour all as specified and approved by Engr-in-charge. |
| 74 | Supply and fixing in of Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver complete all as specified and directed. |
| 75 | 100 mm size MS mat/glossy finish handle complete all as specfied and directed . |
| 76 | Modular type stainless steel of ist quality cutlery basket size 20 x 19 x 4 inches (dia of wire not less than 3.00 mm) of any shape with sides, corrision resistance fixed with and including telescopic soft closing drawer channels of stainless steel of ist quality on both side fixed with steel screws including all fixing arrangements complete all as specified and directed. |
| 77 | All as per item No 75 above but cup and saucer basket size 20 x 17 x 4 inches complete all as specified and directed. |
| 78 | All as per item No 75 above but plain basket size 20 x 19 x 6 inches complete all as specified and directed. |
| 79 | All as per item No 75 above but grain basket size 20 x 17 x 6 inches complete all as specified and directed. |
| 80 | All as per item No 75 above but thali basket size 20 x 19 x 8 inches complete all as specified and directed. |
| 81 | All as per item No 75 above but plain basket size 20 x 17 x 8 inches complete all as specified and directed. |
| 82 | M & L for On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10 users With UPFLOW FILTER all as specified and directed. |
| 83 | M & L for 1.2 M dia X 3 M effective depth Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed. |
| 84 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet,complete all as specified and directed. |
| 85 | 75mm bore PVC (SWR) bends any radius fixed in floor in repair all as specified and directed. |
| 86 | PVC (SWR) Tees suitable for 75 mm external dia complete all as specified and directed. |
| 87 | PVC (SWR), type B, 75mm dia any length single socketed with rubber ring joint, fixed to walls as soil pipe(vent pipe), fixed in repair, complete all as specified and directed. |
| 88 | 110mm bore PVC (SWR) bends any radius fixed in floor in repair all as specified and directed. |
| 89 | PVC (SWR) Tees suitable for 110 mm external dia complete all as specified and directed. |
| 90 | PVC (SWR), type B, 110mm dia any length single socketed with rubber ring joint, fixed to walls as soil pipe(vent pipe), fixed in repair, complete all as specified and directed. |
| 91 | Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth for foundation etc. and getting out in any type of soil, complete all as specified and directed. |
| 92 | 150mm internal dia SGSW, grade A, drain pipe, laid in trenches and jointed as specified and directed. |
| 93 | Cement concrete 1:3:6, type C2 as in bed to 150mm bore drain pipes including packing under and completely hauching to pipes with concrete after they are laid and tested complete all as specified and directed. |
| 94 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, in any type of soil, complete all as specified and directed. |
| 95 | Removing excavated material (soil) not exceeding 50m and depositing where dircted at a level not exceeding 1.50m above the starting point, all as specified and directed. |
| 96 | 75mm thick PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified and directed. |
| 97 | Chequered cement concrete tiles 300mmx300mmx25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors/path including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 98 | Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in copings, kneelers, apex stones, bed plates, kerbs, or similar work complete all as specified and directed. |
| 99 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 100 | Supply only liquid water proofing admixture all as specified and directed. |
| 101 | Preparation of old plastered or unplastered surface of any description and applying one coat of cement base paint (using single or camoufalge colours) over complete all as specified and directed. |
| 102 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. |
| 103 | PCC type B0 (1:2:4) using 12.5mm graded stone aggegates in filling of hold fast and steel door frames etc complete all as specified and directed. |
| 104 | Factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed. |
| 105 | Factory made pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed. |
| 106 | 35mm thick 2nd class hard wood plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified & directed. |
| 107 | Aluminium anodised, barrel tower bolts of extruded section of size 200mm and fixed, complete all as specified and directed. |
| 108 | 300mm long aluminium alloy anodized sliding door with haps, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed. |
| 109 | Stainless steel wire cloth 0.63 nominal dia of wire and average width of aparture 1.20mm and fixed with tinned tacks or galvanised wire staples, complete all as specified & directed. |
| 110 | Preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer,complete all as specified & directed. |
| 111 | Providing and fixing of double rebate openable/fixed windows made of galvanized steel colour coated/powder coated (base steel as per IS 513 of \\"D\\" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester powder up to 50-60 microns thick, outer frame section 72x55mm, centre mullion section 72x50mm, shutter section 47x20mm, fly mesh section 40x20mm and the fixed glass beading section 12x12mm, outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay , handles, latch, 2 nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Popylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer-in-charge. |
| 112 | Sheet glass ordinary quality, 3mm thick, glazing with rubber neoprene packing to aluminium frame in squares exceeding 0.50Sqm in each pane fixed in repairs, complete all as specified & directed. |
| 113 | Dismantling of timber scantling 40sqcm and over in section unframed work,as in any position, complete all as specified and directed. |
| 114 | Preparation of old painted steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint in camouflage pattern/single shade, complete all as specified and directed. |
| 115 | Vitreous china Orissa pan of pattern, long pan size 580x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete fixed in repairs including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe complete all as specified and directed. |
| 116 | Vitreous china wash hand basin, white , flat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 117 | S & F in repairs Vitreous China half stall type of white with grating and union for discharge pipe (including flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 118 | Supply & Fixed in repair counter type Wash basins, Vitreous China (flat back or angle back type) excluding taps, waste, chain and plug and porcelain stoppe but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 119 | Supply & fixed in repair, Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed. |
| 120 | Tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm 45gms /25mm- 65gms) complete all as specified and directed |
| 121 | 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 122 | 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) fixed in repairs, complete all as specified and directed. |
| 123 | PVC (SWR) vent cowl for 110mm dia fixed in repair, all as specified and directed. |
| 124 | Demolition of cement concrete (reinforced) of any description and in any position,complete all as specified and directed. |
| 125 | TMT bars, 08mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and directed. |
| 126 | Precast RCC 1:2:4 type B-1 Using 20mm graded crushed stone aggregate as in cover slabs including necessary formwork and fixed in posion complete all as specified and directed. |
| 127 | Non skid coloured ceramic tiles 8 to 9mm thick (square/rectangular) area of each tile n exc. 0.36Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 128 | Non skid coloured ceramic tiles 8 to 9 mm thick on skirting, including 10 mm thick back coat in CM 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 129 | Glazed ceramic coloured tiles of size 300mmx 450mm x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 130 | Machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar etc over cement plaster and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick plaster/backing coat in CM 1:4 complete all as specified and as directed by Engr-in-Charge |
| 131 | Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified and directed. |
| 132 | Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 133 | 10mm thick exterior vetirfied tiles (Paving tiles) set and jointed with neat cement slurry and pointed with coloured cement to match over 20 mm thick screed bed or bedding layer of mortar in CM 1:4. complete all as specified and directed. (Make of tiles -Endura or equivalent) |
| 134 | Demolition of cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 135 | Extra over stone walling of random rubble walling, uncoursed or brought for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm to face stones and dressing of face beds and joints, complete all as specified and directed. |
| 136 | Preparation of new plastered or unplastered surface of any description and finishing with Acrylic Smooth exterior paint of required shade (Two or more coats), applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 137 | Preparation of old plastered or unplastered surface of any description and finishing with Acrylic Smooth exterior paint of required shade (one or more coats), applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 138 | Taking down of steel door shutter (plain or grill) of any description area exc 1.0 Sqm but not ext 4.0 Sqm and refixing in same opening including repairing, welding, fixing of hinges etc complete all as specified and directed. |
| 139 | GI wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture complete with beads etc. for door shutter/window shutter of any size/type/thickness complete all as specified and directed. |
| 140 | Preparation of new steel Surfaces of any description, n.exc 10cm in width or girth when uncon nected with other painting or when painted in a different tint and apply two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge. |
| 141 | Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) with following specification and making good the adjacent side of jambs of windows by plastering in CM 1: 3 even and smooth complete all as specified and as directed by Engr-in-charge.(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick.(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(iv) 4 mm thick glass superior quality.(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(vii) Sliding rollers per shutter(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix) fixing screw for frame with wall per windows |
| 142 | Aluminium anodised ventilators fixed type of frame size 65 x 40 x 1.98mm thick with glazing of 4.8mm thick plain glass with and including aluminium glazing beading and rubber gas kit complete all as specified and directed. |
| 143 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 144 | Powder coated GI ceiling grid system of grid size 600 X 600 mm fixed to walls with rawl plugs and screws and hang to roof members with 2 mm dia GI wire comprising of the following sections (minimum size) complete all as specified and directed:-Maint Tee 28mmx23mmx0.3mm thick,Cross Tee 28mmx23mmx0.3mm thick and Wall angle 23mmx23 mmx0.3mm thick. |
| 145 | Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings or similar pattern roof coverings complete all as specified and directed. |
| 146 | Hand rails, half round or other steel section, drilled and countersunk for balusters running bars, wind ties for roof including securing bolts; drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 147 | Steel framed work as in hollow tube or tubular trusses, purlins, vertical pole or post for sheds including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979, Grade St 240 complete all as specified and directed. |
| 148 | E/M:PortionTaking down carefully aluminium/copper point wiring (light, fan socket or power) complete including fittings & fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, floors etc complete all as required and keeping serviceable light fittings in safe custody for reuse in the work as directed. |
| 149 | Point wiring on wall/ surface with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including PVC casing caping of size 20mm and provision of 1.5 sqmm FRLS PVC insulated unsheathed cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly with sunk type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated sheet top cover for mounting of fittings,switches, sockets outlets,regulators etc complete for One light/Fan point controlled by one switch complete all as specified and directed. |
| 150 | All as per item No.148 but One 3 pin 5 Amps socket point controlled by one switch on same board. |
| 151 | All as per item No.148 but One 3 pin 5 Amps socket point controlled by one switch on independent board. |
| 152 | All as per item No.152 but point wiring with 2.5 sqmm single core multi stranded copper conductor FRLS PVC insulated & unsheathed cable 1100 volt grade and 2.5 sqmm FRLS PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board. |
| 153 | Submain wiring with 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC casing caping 25mm dia ISI marked as per IS specification fixed on wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm FRLS multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length complete all as specified and directed . |
| 154 | Switch piano flush type single pole, one way 6 amp complete all as specified and directed |
| 155 | Socket outlet 2 in 1 , 3 pin 5 A flush type complete all as specified. |
| 156 | Switch piano flush type single pole, one way 15 amp complete all as specified and directed . |
| 157 | Socket outlet 2 in 1 , 3 pin 15 A flush type complete all as specified and directed. |
| 158 | Ceiling rose 65x50mm three terminals 230 volt complete all as specified and directed. |
| 159 | Step type fan regulator electronic type in 5 step, 100 watt capacity switch/socket type complete all as specified and directed. |
| 160 | Lamp holder,PVC/Polycarbonate type and back plate suitable for batten fitting complete all as specified and directed. |
| 161 | Supply and fixing inverter LED lamp, CDL 9 watt, B22 base, complete all as specified and directed. |
| 162 | Supply and fixing inverter LED batten 1x 20W, with square profile and polycarbonate channel, lithium iron battery with charging time of 8 to 10 hours and backup tile upto 04 hours with driver, holder incl LED tube light connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 163 | LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 164 | Distribution board double door type(for incoming MCCB & outgoing MCBs) TPN 4 way vertical type sheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and as directed. |
| 165 | Sheet metal enclosures for MCB distribution board 230 Volts single pole and neutral 8 way double door type flushed inside the wall with 200 Amp rated bus bar including making the surface good complete all as specified and directed. |
| 166 | MCCB 100 Amp, 4 pole 16 KA with adjustable thermal release fixed magnetic protection complete all as specified and directed. |
| 167 | MCBs SPN 63 amp B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. |
| 168 | MCBs SPN 40 amp B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. |
| 169 | MCBs SP 5 to 32 amp B curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete all as specified and directed. |
| 170 | Exhaust fan, Steel body, heavy duty, AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed. |
| 171 | Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades, complete all as specified and directed by Engineer-in-Charge. |
| 172 | Rewinding the ceiling fan 1200mm Sweep with the same gauge of copper winding wire as well as number of turns and reassembling the fan after replacing the unserviceable spares like bushes, shafts, fasteners, bearings, capacitors and flexible cord for putting fan in serviceable condition including refixing the same after carrying out necessary repairs to original place all as directed by Engineer-in-Charge. |
| 173 | Painting of ceiling fans and writing of MES No on fans in situ with synthetic enamel paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc, complete all as specified and directed by Engineer-in-Charge. |
| 174 | Ceiling fans complete with three blade, down rod, accessories 230V, 1200mm sweep, BLDC fan with 5 star rating complete all as specified and as directed. |
| 175 | Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 1.5 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed. |
| 176 | Bus bar chamber of size 600x600x450mm suitable of 3 phase 433V outdoor type fabricated out of 3.15mm thick MS sheet with 300A rated aluminium busbar 4Nos., PVC sleeves (coloured red, yellow, blue and black) with suitable locking arrangments and four legged angle iron stand made of angle iron of size 40x40x6mm duly grouted in and including foundation in PCC 1:2:4 type C1 using 20mm graded stone aggregates alongwith all necesary cable connections, lugs and cable glands including applying two coats of synthetic enamel paint (of approved tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 177 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead strip 25 x 4 mm size upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thick in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,40mm dia,light grade,7.5 mtr long for protection of earth strip upto test point etc all as specified and as directed. |
| 178 | Energy efficient LED light fitting, 45W, input voltage 110V to 280VAC, 50Hz with ingress protection IP 66, LM 80, stranded luminries with efficiency 100lumen/Watt, with secondary optics, perfectly matched lenses, complying to IEC60598/IS10322, with auto shut down on high voltage, CRI>70, PF>0.95, with short circuit & reverse circuit protection against 10kV high surges, minimum 25000 burning hours (life), operating temperature 1 to 50oC, rectangular shape with pressure die cast aluminium housing with weather proof gasket for lamp and driver compartment with system wattage of 45W=10%W, rated lumens, 120o view angle, constant current type driver having THD<10%, including all fixing arrengment like clamps, nuts, bolts, washers, 45W LED rod lamp (havng PF>0.9, input voltage 90-300V, IP-66, LM80) with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc.including bracket complete all as specified and as directed. |
| 179 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete all as specified and directed. |
| 180 | Supply and laying dry sand river for cushioning with layers of sand 8 cm before laying of cable and 15 cm after laying of cable in trenchesincluding punning of sand complete all as specified & directed. ( Note: Thickness after punning shall be measured and paid ) |
| 181 | Brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed. |
| 182 | Cutting to road/cement path/hard standing/Road for providing GI pipe 40mm both end socketed for passing armoured cable incl making good the disturbed surface complete all as specified. |
| 183 | GI tubing 40 mm bore light grade galavanised with all fitting complete for cable protection under road crossing/on pole/wall or similar position all as specified and directed. |
| 184 | Earthing complete with galvanised earth plate electrode 600 x 600 x 3.15 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including GI wire as earth lead 4.0 mm size upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of brass and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thick in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc complete all as specified and directed. |
| 185 | LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 186 | Sheet metal enclosures for MCB distribution board 230 Volts single pole and neutral 12 way double door type flushed inside the wall with 200 Amp rated bus bar incl making the surface good complete all as specified and directed. |
| 187 | Sheet metal enclosures for MCB distribution board 230 Volts single pole and neutral 04 way double door type flushed inside the wall with 200 Amp rated bus bar incl making the surface good complete all as specified and directed. |
| 188 | Providing, opening and grouting the nuts and bolts for fixing of exhaust fan in wall including civil work as required on site and making the good disturbed surfaces complete all as specified and directed by Engr-In-Charge. |
| 189 | MCCB 100 Amp, 4 pole 16 KA with adjustable thermal release fixed magnetic protection complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender