Tender For Providing Of Gd Room At T-9 Under Ge (East) Delhi Cantt-10
Tender Value
43.52 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
9 days left
EMD
87100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Gd Room At T-9 Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified and directed. |
| 2 | Excavating in trenches, not exc 1.5m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth and getting out any type of soil, complete all as specified and directed. |
| 3 | M&L for Plain Cement concrete (1:4:8) type D2 using in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | M &L TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 5 | Description all per item ser No 4.00 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 6 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for fair finished flat surface complete all as specified and directed. |
| 7 | M&L for RCC M-25 design mix (20mm graded aggregates) as in foundation, including raft, footing foundation beams plinth beams bases for columns complete all as specified and directed. Note : Structural details including reinforcement shall be approved by the Engr-in-Charge. |
| 8 | M&L for Form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 9 | M&L for RCC M-25 design mix (20mm graded aggregates) as in columns , pillars, piers, posts and struts etc complete all as specified and directed. Note : Structural details including reinforcement shall be approved by the Engr-in-Charge. |
| 10 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 11 | M&L for Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed. |
| 12 | M&L for Approved earth (sand) filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 13 | M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 14 | M&L for 75 mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone agg) as in Sub-base to floor finishes, complete all as specified and as directed. |
| 15 | M&L for Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) Flat including fair finish complete all as specified and directed. |
| 16 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) Flat including fair finish complete all as specified and directed. |
| 17 | M&L for RCC M-25 (Design mix) as in stairways (except spiral staircases) including steps (square or spandrel), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litre complete all as specified and directed. Note : Structural details including reinforcement shall be approved by the Engr-in-Charge. |
| 18 | M&L for RCC M-25 (Design mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note : Structural details including reinforcement shall be approved by the Engr-in-Charge. |
| 19 | M&L for RCC M-25 (Design mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. Note : Structural details including reinforcement shall be approved by the Engr-in-Charge. |
| 20 | M&L for Formwork to sides and soffits of floor or roof beams, beam hauntings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 21 | M &L for TMT bar 6mm dia and over up to 8mm,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 22 | M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide complete all as specified and directed. |
| 23 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 24 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4), complete all as specified and directed. |
| 25 | M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter complete all as specified and directed. |
| 26 | M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges, Flat surface incl fair finish complete all as specified and directed. |
| 27 | M&L for Rendering 10mm thick using Cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 28 | M&L for Rendering 5mm thick using Cement mortar (1:3) concrete surfaces in ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | M&L for Rendering 5mm thick using cement mortar 1:4 over 10mm thick using Cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 31 | M&L for Vitrified Ceramic tiles light shade 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors over and including 15mm thick screed bed of CM (1:6) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 32 | M&L for Vitrified Ceramic tiles light shade 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in riser of steps, skirting, dado and pillar etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 10mm thick rendering/ backing coat in CM 1:4 jointed, complete all as specified and directed. |
| 33 | M&L for pre polished factory made machine cut kota stone slab flooring 18-20mm thick using PVC spacer over 20mm thick cement screed bed in CM (1:6), laid and jointed with white cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 34 | M&L for 50mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate), finished even and smooth without using extra cement in floor complete all as specified and directed. |
| 35 | M&L for 2 Coats of OBD over a coat of primer and 2mm thick wall care putty incl preparation of newly plastered surface on walls complete all as specified and directed. |
| 36 | M&L for 2 Coats of OBD over a coat of primer and 2mm thick wall care putty incl preparation of newly plastered surface on Ceiling surface complete all as specified and directed. |
| 37 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 38 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Make 'Rajshree/ Black Cobra or equivalent' |
| 39 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibbers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including 3 Nos stainless steel butt hinges of size 100mm, 2 Nos 150mm long stainless steel tower bolt and 01 No 250mm long sliding bolt of all as per direction of Engineer-In-Charge. Make 'Rajshree or equivalent \\" |
| 40 | S & F for Factory made UPVC (white/Off white colour) sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1+0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1+2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selected quality glass, Aluminium track on bottom rail to be of here track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 41 | S & F for Factory made UPVC (white/Off White colour casement (Openable) Door made of extruded profile members with wall thickness of 2.3mm (1+0.2mm). Door profile members with hollow section with multi chamber. Frame (60mm x 60mm), sash bars (60mm x 110mm). T-profile (One vertical length in between two shutters 60mmx 74mm). Glazing head (35mmx 20mm) will be mitered cut and fusion welded at all corners, including making of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware EPDM gasket 1.2 to 0.02mm thick galvanised steel frame (28mmx21.50mm), sash bars (31mmx27mm). T-profile (27x17mm) to be inserted in required profile frame and will be fixed to wall 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloy (white powder coated), Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with striker, Hinges of zinc alloy (white powder coated) and 5mm thick glazing with selected quality glass, complete all as specified and as directed.(Note: The unit rate quoted by contractor includes cost of glass, hydraulic door closure, lock and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 42 | S & F for Factory made UPVC (white/Off white colour) openable side hung window with 2 shutter (glass and wire mesh) made out of extruded profiles with wall thickness of members as 2.3mm (1+0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1+0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : handle lock to be of Zinc alloy (white powder coated), including 4mm thick glazing with selected quality glass, 0.5mm dia and 1.00mm aperture wire mesh complete all as specified and as directed. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 43 | S&F for Stainless steel square bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, fixed independently in frame and fixed with screw in wall complete all as specified and directed. |
| 44 | S & F for Stainless Steel work of Grade-304 as in Gates, grills, railing posts (horizontal/ vertical) or any type of other work or in any position, of any type and size including special shaped washers, channels, plates horizontal/ vertical made of hollow tubes or in any other shape as per requirement at site complete all as specified and as directed. |
| 45 | S&F for Stainless steel butt hinges 100 mm long, medium weight, and fixed complete all as specified. |
| 46 | S&F stainless steel sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet complete all as specified and directed. |
| 47 | S&F for stainless steel, barrel tower of 200mm long bolts of extruded section and fixed complete all as specified and directed. |
| 48 | S&F for stainless steel handle cast type anodised,150mm long all as specified and directed. |
| 49 | M&L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 50 | M&L for Hard core of borken bricks gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified and directed. |
| 51 | M&L for 50 mm thick cement concrete 1:3:6, type C-2 (using 40mm graded agg) as in plinth protection finished even and smooth using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and directed. |
| 52 | M&L for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., applying a coat of bituminous primer @ 0.3 ltr per sqm and coat of hot blown VG-20 paving grade (60-80) penetration bitumen applied hot @ 1.2 kg per sqm, blinded with grit or pea size gravel @ 0.006 cum per Sqm, and lightly tampered (area of flashings, etc., shall be added to the roof area) and applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified. |
| 53 | M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered onb edges complete all as specified and directed. |
| 54 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 55 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 56 | M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size area of each tile exc 0.18 sqm not exc 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed. |
| 57 | M & L for glazed ceramic tiles in vertical surface of size 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 58 | S & F Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) 'S' Trap/P-trap, including seat cover with connection to drain and to flushing pipe antisyphonage pipe and making good to floor complete all as specified and directed. |
| 59 | S&F 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed |
| 60 | S&F brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. |
| 61 | S & F CP shower rose fancy type 200mm x 200mm size with 600 mm long shower arm, fixed to 15mm bore pipe, complete all as specified and as directed. |
| 62 | S & F 65 x 95 mm rectangular shape single flow hand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed. |
| 63 | S & F CP jet spray for EWC with 1mtr long flexible stainless steel connecting pipe 15mm bore, fixed in repairs, complete all as specified and as directed. |
| 64 | S & F full pedestal pattern wash hand basin, size of basin 630mm x 510mm and pedestal of 900mm long colour as approved by GE including brakets, chromium plated brass waste coupling etc complete all as specified and as directed. |
| 65 | S&F fancy type chromium plated 15 mm dia stop cock/angle cock/ angle cock, cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flinch screwed both ends for iron or for union. |
| 66 | S&F 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as specified and as directed. |
| 67 | S&F PVC connection 15 mm bore and 600mm long with washers complete all as specified and directed. |
| 68 | S&F fancy type chromium plated bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule |
| 69 | S&F fancy type chromium plated pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 70 | S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 71 | S&F Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron complete all as specified and directed. |
| 72 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete all as specified and directed. |
| 73 | S&F fancy type SS 304 grade toilet paper holder, complete all as specified. |
| 74 | S&F CP towel rail 20mm dia and 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. |
| 75 | S & F in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood or looking mirror with cabinet (as directed at site by Engr in charge) and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 76 | S&F for Corner Glass Shelf (with Bracket) complete all as specified & directed. |
| 77 | S&F for Glass Shelf 600mm Long fancy type complete all as specified & directed. |
| 78 | S&F vitreous china one piece counter top wash basin, white, of size 410x410x160 mm/ 570x420x195 mm/ 615x415x150 mm including coupling, bottle trap/waste pipe complete all as specified and directed. |
| 79 | M&L for Mild Steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 chamfered complete all as specified and directed. |
| 80 | M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly including concealed conduit pipe and modular box covered with modular plate (top cover) for mounting modular switches, sockets or fan regulators etc for one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.complete all as specified and as directed. |
| 81 | Description all as per item No. 80.00 herein before but one socket outlet point 5 amps on the same board. |
| 82 | Description all as per item No. 80.00 herein before but one socket outet point 5 amps on the independent board. |
| 83 | Description all as per item No 80.00 above but, one light point controlled by two 2 way switches |
| 84 | Description all as per item No. 80.00 here-in-before but with 4 sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for independent point. |
| 85 | Description all as per item No. 80.00 here-in-before but with 4 sqmm FRLS-H copper wire independent point suitable for Geyser and Air Conditioning with 4 Sqmm FRLS-H copper earth wire for independent point. |
| 86 | S&F modular switch flush type, 6 amps one way, SP, 230 volts AC all as directed. Make-Indoasian shynora/ Anchor Roma/ Legrand Arteor or equivalent. |
| 87 | S&F modular socket outlet 6 amps 5 pin 2 module complete all as directed. Make-Indoasian shynora/ Legrand Artear/ Havells murano/ Gold medal Gifa-X9 or equivalent. |
| 88 | S&F in replacement modular switch bell push flush type, 6 amps one way, SP, 230 volts AC complete all as directed Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 89 | S&F modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module complete all as directed. Make-Indoasian shynora/ Legrand Artear/ Havells murano/ Gold medal Gifa-X9 or equivalent. |
| 90 | S&F modular switch flush type, 16 amps one way, SP, 230 volts AC complete all as directed. Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 91 | S&F modular Step Fan regulator, 120 watts single / double module complete all as directed. Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent. |
| 92 | M & L in replacement of Bell ding dong AC, 230 volts single pole complete all as specified. Make-Indoasian shynora/Legrand Artear/Havells murano/Gold medal Gifa-X9 or equivalent.. |
| 93 | S & F of Ceiling rose, 3 terminal, PVC/polycabonate, isulated body complete all as specified and directed. |
| 94 | M&L Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FRLS-H, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 10.0 Sqmm (nominal area) FRLS-H, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed. |
| 95 | S & F of LED batten luminaire surface mounted with aluminium housing & PC diffuser, 4 feet system wattage of 20 watts initial lumen maintained CRI>80, Power Factor >0.9, THD<20%, colour temperature-6500K, surge Protection 2.5 KV in CM, IP-20 protected, meets LED IS specified, Class-1, short circuit and over circuit protection, voltage range -140 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiency at luminaire level >120 Lumen/watts and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 96 | S & F of LED batten luminaire surface mounted with aluminium housing & PC diffuser, 2 feet system wattage of 10 watts not less than 1200 lm initial lumen maintained CRI>80, Power Factor >0.9, THD<20%, colour temperature-6500K, surge Protection 2.5 KV in CM, IP-20 protected, meets LED IS specified, Class-1, short circuit and over circuit protection, voltage range -140 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiency at luminaire level >120 Lumen/watts and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 97 | S&F of LED Bed Side Flexible Arm lamp 5/6 W complete all as specified and directed. Make Eveready/Crompton/Havell or equivalent. |
| 98 | S&F of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed. |
| 99 | S & F of street light bracket incl clamp, nut and anchor bolt etc make to shape for street light fitting made out of GI pipe light grade 25 mm bore 1.0 mtr long on bend to shape the top of wall of existing building complete all as specified and directed. |
| 100 | S&F BLDC (Brushless Direct Current) Ceiling Fan (energy efficient), 1400 mm (as directed by Engineer-in-charge) BLDC Remote controlled suitable for regulator, voltage 220V, having full copper motor winding & ribbed 3 Nos A/M blades. The fan shall have BEE 5 star rating and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan and service value more than 7.1 minimum air delivery 255 CMM, complete all as specified and directed. Make-Havells/ Atomberg/ Crompton and Goldmedal. |
| 101 | S&F of wall mounted fan 400mm sweep, Copper winding, 240 Volts. 50 Hz and depositing the old u/s to mes store yard, complete all as specified and as directed. |
| 102 | S&F of Ventilating fan 250mm sweep plastic body type including self cousing louver and making all electric connections, complete all as specified and as directed. |
| 103 | S & F of MCCB incommer Distribution Board (Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connection complete all as specified and as directed. Make-Indoasian Optipro or equivalent in Legrand/ Schneider/ Havells/ Lauritz knudsen. |
| 104 | S&F MCCB 3 Pole, 160 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified. Make-Indoasian Optipro or equivalent in Legrand/ Schneider/ Havells/ Lauritz knudsen. |
| 105 | S & F of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 16 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed. Make-Indoasian Optipro or equivalent in Legrand/ Schneider/ Havells/ Lauritz knudsen.. |
| 106 | S & F of MCB C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA of capacity 6 to 32 amps complete all as specified and directed. Make-Indoasian Optipro or equivalent in Legrand/ Schneider/ Havells/ Lauritz knudsen. |
| 107 | S & F of MCB suitable for 240 volts AC supply, SPN of capacity 63 Amps complete all as specified and directed. Make-Indoasian Optipro or equivalent in Legrand/ Schneider/ Havells/ Lauritz knudsen. |
| 108 | S&F oF Geyser 25 litre capacity vertical type with steel tank and glass inner linen, 5 star rating complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock, complete all as specifed and as directed. Make - Havells/Goldmedal/Crompton or equivalent. |
| 109 | Supply and fixing of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed. |
| 110 | S&F of Modular TV socket 01 Module size socket as per site requiremen, complete all as directed by the Engr-in-Charge. |
| 111 | M&L of Modular Telephone socket Jack 01 Module size (RJ 11 Socket Jack) complete with modular sheet as per site requirement complete all as directed by the Engr-in-Charge. |
| 112 | M&L for TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to TV socket, drawn in and including separate concealed PVC conduit complete all as directed. |
| 113 | M&L of telephone Wiring with twin core PVC insulated, PVC sheathed cable suitable for telephone wiring and making all necessary connections from terminal box to telephone socket, drawn in and including separate concealed PVC conduit complete all as specified and directed. |
| 114 | Supply and fix Automatic Hand drier hot air dispenser with infrared sensor metal body with all accessories including all electrical connection complete all as specified and as directed.Make-Euromics(E4270N) or equivalent. |
| 115 | Supply and fixing of wall light fitting with and incl 9 watt LED lamp complete all as directed. Make Eveready/ Crompton/ Havell or equivalent. |
| 116 | Earthing complete with galvanised steel earth plate electrode 60×60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. |
| 117 | XLPE insulated, armoured heavy duty UG electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 3.5 core |
| 118 | M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge. |
| 119 | Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender