Tender For Special Repair To Bldg No T-06 Under Age B/R-Ii At Tibri Mil Stn Ge Gurdaspur.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
16 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurdaspur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-06 Under Age B/R-Ii At Tibri Mil Stn Ge Gurdaspur.
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for removing existing treatment ,all loose gravel cement mortar , dirt, oil, grease and foreign material by jet of dry air, roughening and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface . Repair all joints & cracks and apply primer with smart care epoxy primer to seal the pores/cracksand enhance the adhesion of the coating. • Apply first coat of fibres reinforced elastomeric liquid water proofing membrane formulated with PU hybrid poymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110, having minimum elongation of 300% to 350%, tensile strength of 1.8 Mpa to 2.9 Mpa and shall have cracks bridging ability upto 10-12 degree celcius with 33% dilutioon of priming coat. Laying of fiber mesh of 0.3mm thickkness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50 mm and allow it to dry for 10 to 12 Hrs. Apply second of undiluted coat @0.45ltr/sqm and allow it to dry for 4 to 5 Hrs. Apply third and final coat undiluted @0.45 ltr/sqm all as specified and as per manufacturers specification having warranty for 10 years . (Note : Application of water proofing treatment will be done by Authorised Applicator only) . |
| 2 | M&L for flush pointing on bricks laid flat in CM 1:3 with raking out new and existing joints, complete all as specified and directed. |
| 3 | M&L for PCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for ceramic glazed dark shade coloured tiles of size 450x300x7mm thick joint free on and including 10mm thick screed bed in CM(1:4) set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado and demolition of existing tile complete all as specified. |
| 5 | M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 and demolition of existing tile complete all as specified. |
| 6 | M&L for dark/light coloured vitrified tiles 9 to 10mm thick joint free (square/rectangular) area of each tile n exc 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 and demolition of existing tile complete all as specified. |
| 7 | M&L for green marble work 14-16 mm thick (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms, stair case and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15 mm thick screed bed in CM 1:4 and demolition of existing marble complete all as specified and directed (The marble shall be fixd in one piece only). |
| 8 | M&L for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface even and fair complete all as specified and directed by Engineer-in-Charge. |
| 9 | Demolition of PCC of any description and in any position (in sunken, floor, plinth etc) not otherwise specifically provided for complete all as specified & directed. |
| 10 | M&L for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) and finished with cement sand mortar (1:3) using coarse sand in patches area n. exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of finishes existing at any height complete all as specified. |
| 11 | S&F steel window box type made of ERW tube hollow P section of size 60mmX25mm double rebated outer frame comprising double shutters i.e. guaged skelton & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 completeincl two coat of painting incl taking down old existing window :- (i) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iii) MS Tower bolt 150mm long-02 Nos per leaf (iv) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (vii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). (viii) Painting with one shop coat of zinc chromate primer. Note: Wire cloth, glass shall be measured and paid for separately |
| 12 | S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, painting with one shop coat of zinc chromate primer incl two coat of painting incl taking down old existing window/ventilator complete all as specified and directed. Note: Glass/ wire cloth shall be measured and paid for separately |
| 13 | Taking down chowkhats with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each, and removing from site complete all as specified and directed. |
| 14 | All as per Srl item No 13 above but area exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and directed. |
| 15 | S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with single or double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces and complete all as specified and directed. |
| 16 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lug or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. as per specification & drawing complete all as specified and directed. |
| 17 | S&F for 35mm thick 2nd class hard wood glazed and skelton shutters as in doors open rebated and prepare to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24 (a) complete all as directed. |
| 18 | S&F of 35mm thick modular designer flush doors, solid core construction, with block board core and pre-lamination on both sides complete all as specified and directed. |
| 19 | Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 20 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm each complete all as specifiwd and directed. |
| 21 | S&F figured glass pin head type glazing with oil puty glass 3mm thick, fixed with oil puty in square n exe 0.5sqm in each pane. |
| 22 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 23 | S&F 100mm butt hinges, medium weight, cold rolled mild steel, and fixed all as directed by Engineer-in-Charge. |
| 24 | S&F 150 mm long aluminium handles cast type all as directed by Engineer-in-Charge. |
| 25 | S&F 200 mm long aluminium tower bolts of extructed section section all as directed by Engineer-in-Charge. |
| 26 | S&F 250 mm aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 27 | S&F in repairs floor door stopper140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 28 | M&L for 15 mm thick rendering with ready mix mortar of approved make on brick work/stone/concrete wall, facia, projection, chajja etc. external surfaces finished even and smooth without using extra cement incl taking down existing plaster incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 29 | M&L for 12 mm thick rendering with ready mix mortar of approved make on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement incl taking down existing plaster incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 30 | M&L for 5 mm thick rendering with ready mix mortar of approved make on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement incl taking down existing plaster incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 31 | M&L for preparation of new plaster surface and applying two coats of cement base paint on wall surface complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a 2mm thick layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 33 | M&L preparation of new plaster surface and applying three coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 34 | M&L for prepration of old plastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified and directed. |
| 35 | M&L for preperation of old plastered surfaces ceiling and applying two coats of white wash complete all as directed. |
| 36 | M&L preparation of old plastererd surface after complete removal of existing treatmnt and applying two coats of Oil bound distemper on walls on plastered surface wall complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for water proofing treatment to sunkem floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:-(i) Application of two component acrylic modified cementitious coating (a) The surface to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance existing coating and achieve a gripping profile that is clean, dry and free from laitance and any other form of surface containmation. The installation instruction in manufacturer's published literature shall be strictly complied with, including but not limited to the following:- (b) Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr. Fixit 302 SBR latex/ perma latex SBR/FOSROC Nitbond SBR latex/Asian paint latex as required. Final cleaning of surface with powder grinder, wire brush, hair brush & vacum pressure (c) Providing PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) of 50mm thick admixed with SIKA plastocrete over the applied water proofing coating on horizontal surfaces.(Admixture: Sikaplastocrete plus/FOSROC/Dr. Fixit/STP/CICO confirming to IS 2645.) (d) Dampen all surface immediately ahead of apllication of acrylic modified cementitious coating of SIKA top seal-107/Brush bomd FOSROC/Dr. Fixit/STP/CICO. |
| 38 | (e) Whilst the surface is still damp from saturation (SSD) apply one coat of acrylic modified cementitious coating of SIKA top seal-107/ Brush bond FOSROC/Dr. Fixit/STP/ whilst of the first coat is wet. (f) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr. Fixit/STP whilist the first coat is wet. (g) Once touch dry, apply second coat of acrylic modified cementitious coating of SIKA top seal-107/Brush bond FOSROC/Dr. Fixit/STP/CICO of viscosity as per manufacturer ins on the entire area. Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (h) The waterproofing coating shall be taken to a height minimum 300mm above the finished floor level on the vertical surface. (j) It is essential to cure acrylic modified cementitious coating immediately after application (min 6-8 hrs drying) for a min of 3 to 5 days to ensure full cement hydration and to minimize cracking. (k) A protection plaster (15mm thick) in ready mix mortar admixed with appropriate integral water proffing compound has to be a apllied on the walls(.Admixture: Sikaplastocrete plus/FOSROC/Dr. Fixit/STP/CICO confirming to IS 2645.) (l) All the corners and joints shall be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansion zone in the centre of make seal tape SIKA/FOSROC/Dr. Fixit/STP. (m) The membrane has to be protected in accordance with the manufacturer's recoomendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. |
| 39 | (n) Waterproofing treatment has to be carried out through authorised applicators. (o) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (p) All CI/PVC Traps in sunken slabs to be enclosed with PCC 1:1.5:3 type B-0 (using 12.5mm graded crushed stone aggregate) (min 15cm) allround. (q) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) complete all as specified. (r) Providing drainage spout pipe GI 40mm dia bore light grade upto outside of outer wall (Approx 300 mm long) incl cutting to existing wall and making good the distrubed surface complete all as specified and directed. (s) Providing 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in flooring for laying floor finishes all as specified. Note:- Items no. (q) and (s) shall be measured and paid for seperately. |
| 40 | M&L for PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggreagte) filling foundation and mass cove in sunken floor complete all as specified and directed. |
| 41 | M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base for receiving the floor finishes complete all as specified and directed. |
| 42 | S&F 1000 ltr capacity rotational moulded polyethylene 3-layer white water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including dismantling of water tanks complete all as specified and directed. |
| 43 | S&F in repair 20 mm float ball brass valve high pressure with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. |
| 44 | S&F GI tubing 15mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up and down complete all as specified and directed. |
| 45 | S&F GI tubing 20mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up and down complete all as specified and directed. |
| 46 | S&F Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed |
| 47 | S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with PVC `P’ or `S’ trap, integral foot rest including water connection to trap and flushing pipe complete all as specified & directed |
| 48 | S&F in repairs vitreous china wash down water closet (pedestal pattern) fixing with bolts, white colour, incl stainless steel L-type jet spray with 1m hose pipe, connection to trap and to flushing pipe, anti-syphonage pipe, etc. incl seat cover complete including making good to floor complete all as specified and directed. |
| 49 | S&F in repair PVC low level dual action flushing cistern 08 to 10 ltr capacity with syphonic action PVC flot valve ,brackets and 32 mm bore PVC flush pipe ect all as specified and directed. |
| 50 | S&F in repair for 15mm bore stop/angle valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup (concealed type) and fixed complete all as specified and directed. |
| 51 | S&F in repair bib taps 15mm dia chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and directed. |
| 52 | S&F in replacement of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts complete all specified and directed. |
| 53 | S&F CP shower rose 125mm size with swivel joint fancy type as directed by Engineer-in-Charge. |
| 54 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 55 | S&F in repair vitreous china wash basin, white flat back, size 550x400mm excluding taps, waste,chain and plug and porcelain stopper but including brackets. |
| 56 | S&F in repair PVC waste pipe 32mm dia 800mm to 1200 mm long fixed to wash fitting of wash basin and sink all as specified and directed. |
| 57 | S&F 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor including dismantling of existing all as specified & directed |
| 58 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor including dismantling of existing complete all as specified and directed. |
| 59 | S&F in repair PVC (SWR ) bends 110 mm bore any radius all as directed by Engineer-in-Charge. |
| 60 | S&F in repair PVC (SWR ) bends 75 mm bore any radius all as directed by Engineer-in-Charge. |
| 61 | M&L PVC (SWR ) floor trap 100/75 mm plain with grating including jointing with solvent cement all as directed by Engineer-in-Charge. |
| 62 | S&F stack clamps for 110 mm pipe out of 20mm x 1.5mm galvanised mild steel flat and iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 63 | S&F stack clamps for 75 mm pipe out of 20 mm by 1.5 mm galvanised mild steel flat and iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 64 | S&F in repair cutrain rod 20mm dia of anodised aluminium alloys with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug complete all as specified and directed. |
| 65 | S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified & directed. |
| 66 | S&F in 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 67 | M&L for 60 mm thick PCC (M-35) factory made with gray cement and pigment interlocking tiles/ paver block of shape/ size as conforming to IS 15658, joints will be filled with fine sand including demolition of existing tiles complete all as specified and as directed by Engr-in-Charge. (Note :- Sand will be paid under relavent item). |
| 68 | M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floors to raise level complete all as specified. |
| 69 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in copping for brick work, side benching complete all as specified and directed. |
| 70 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 71 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 72 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed. |
| 73 | Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed. |
| 74 | M&L for brick work with fly ash bricks, straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 75 | M&L for half brick thick wall with fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed. |
| 76 | M&L for RCC 1:1.5:3 type B-0 (using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, chajja, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 77 | M&L for mild steel deformed TMT bars 5 mm To 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 78 | Form work to soffits of suspended slabs such as roof slabs, floor slabs and lintels, chajja landing and similar work not exc 200mm thick complete all as specified and directed. |
| 79 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc not exc 10 sqm on plan and not exc1.5 m in depth and getting out,all as specified & directed. |
| 80 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 81 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 82 | Demolition and breaking up old unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete) 150 mm bore at any depth set in cement mortar includind PCC bed complete all as specified & directed. |
| 83 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in concrete bed to drain pipes incl packing under,and haunching against the sides of pipes after they are laid and tested complete all as specified & directed. |
| 84 | Supplying, laying in trenches, jointing and testing reinforced RCC pipes 150mm, class NP3, laid and jointed complete with collars at any depth over PCC bed ccomplete all as specified and directed. |
| 85 | S&F pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls,fixed with self tapping screws including dismantling of old asbestos/corrugated/semicorrugated sheet all as specified and directed. |
| 86 | Dismantling framed work timber scantlings 40 sqm and over in section, in any position complete all as specified and directed. |
| 87 | S&F rolled mild steel Gde Fe-410-W Gde E-250 Quality-A in roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails & fastenings & heavy brackets framimg (beam, tee, angle, coulmn, gusset plates, channel, hollow square/rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc. complete all as specified and directed by Engineer-In-Charge. |
| 88 | M&L for excavating in post holes (or similar holes) in soft/ loose soil, each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface. |
| 89 | S&F in repair vitreous china urinal, half stall type, white all as directed by Engineer-in-Charge (excluding flushing cistern, flush pipe and waste pipe) |
| 90 | E/M PORTION Taking down carefully aluminium/ copper point wiring for light, fan, bell, socket of point complete fiitings such as switches, ceiling roses, pendents, regulator socket etc complete at site and making goods disturbed surfaces of walls, floors etc complete all as specified and directed. |
| 91 | M&L for point wiring with PVC insulated and PVC unsheathed multistranded FRLSH copper conductor cable of size 1.5 Sqmm including existing concealed PVC conduit fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 Sqmm dia to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to CI/MS boxes for mounting of accessories like surfaces sockets and regulators etc. complete all as specified for One light / Fan/ bell point controlled by one way modular switch complete all as specified and directed. |
| 92 | All as per Srl item No 89 above but one 5 amp modular socket outlet on independent board. |
| 93 | All as per Srl item No 89 bove but one 5 pin modular socket outlet 5 amp on same board. |
| 94 | All as per Srl item No.89 here-in-before but one light point controlled by two way modular switches. |
| 95 | All as per serial item No.89 here-in-before but wiring with 2.5 sqmm FRLSH copper wire including earth wire 2.5 Sqmm of copper for 15 Amps 3 pin socket outlet. |
| 96 | M&L for sub main wiring with two runs of single core multi stranded PVC insulated, copper conductor, grade 1100 Volt, FRLSH cable of size 6 sqmm (red for phase and black for neutral) including electrical grade PVC conduits of desired colour not less than 1.2 mm thick and 32mm dia and 6 sqmm multistranded copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete including taking down old unserviceable wiring complete all as specified and directed. |
| 97 | M&L for sub main wiring with two runs of single core multi stranded PVC insulated, copper conductor, grade 1100 Volt, FRLSH cable of size 4 sqmm including 4 sqmm multistranded copper conductor FRLSH cable PVC insulated for earthing duly connected with earth dolly, with approved colour coding including PVC conduit heavy grade 32mm dia, 1.2mm thick of appropriate dia concealed in wall with accessories including cutting chases and making good to the disturbed surfaces as per existing and taking down old unserviceable wiring complete all as specified and directed.Note for item No 94 & 95:- Three run of cable alongwith PVC conduit together shall be measured as single run. |
| 98 | S&F in replacement of LED tube light fitting 20 watt for all purpose surface and wall mounted with single side connection polycarbonate LED batten with aluminium housing and integrated electronic driver of capacity 20W, four feet and connection with PVC insulated twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed. |
| 99 | S&F modular fan regulator 5 step type size 100 watt complete all as specified and directed. |
| 100 | S&F modular lamp holder, PVC/polycarbonate type insulated body with back plate suitable for batten/ angle fittings complete al as specified and directed. |
| 101 | M&L for ceiling rose surface bakelite 65x50mm three terminal complete al as specified and directed. |
| 102 | S&F modular switch 1 way, 1 module 6 amps single pole one way complete all as specified and directed. |
| 103 | S&F modular socket, 2 module 6A 2/3 pin complete all as specified and directed. |
| 104 | S&F modular switch 1 way, 16 amps, 1 module complete all as specified and directed. |
| 105 | S&F modular socket, 6A/ 16A -2/3 pin combined, 2 module, complete all as specified and directed. |
| 106 | S&F modular switch 2 way, 6 amps, 1 module complete all as specified and directed. |
| 107 | S&F LED light fitting 1x9 watt/ 1x 10 watt bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 108 | S&F in replacement GI pipe bracket made out of GI pipe light grade 32 mm bore and bent to shape 1.5m long, MS clamps made out of MS flat iron of size 32mm thick with nuts, bolts and washers complete including dismentling the existing GI pipe bracket and drilling of holes for nuts and bolts etc complete all as specified and directed. |
| 109 | S&F LED street light fitting 45 Watt 230V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 110 | S&F decorative type 9W, LED wall mounting fittings complete set including 9W LED lamp complete all as specifed and directed. |
| 111 | Taking down carefully ceiling fan complete fittings removing fans, deposting to MES store yard and taking back to site for refixing complete all as specified and directed. |
| 112 | Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose to connector of fan complete all as specified and directed. |
| 113 | S&F in repair sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 12 way with 200 amps rated bus bar SPN double door complete all as specified and directed. (Note :- All the connection of incoming and outgoing wire in MCB will be made with thimble with suitable size as directed). |
| 114 | S&F in repair MCB single pole 6 amps to 32 amps, complete all as specified and directed. |
| 115 | All as per Srl item No 112 here-in-before but single pole and neutral 32 amps to 40 ampscomplete all as specified and directed. |
| 116 | M&L for replacement of distribution board made out of CRCA sheet DB vertical type double door TPN 4 way MS sheet including fixing to wall, cutting chases, grounting and necessary patch work and white wash to match with the existing including making connections all as directed containing the folowings:- (a) MCCB 4 pole 100 amps 16 KA breaking capacity with thermal release: 01 No (In coming). (b) Bus bar made out of aluminium duly insulated wire adhesive tape RYB & black :4 Nos. (c) MCB SPN 40 Amp- 4 Nos, MCB SP 10-32 Amp- 08 Nos (out going). (d) Connection from MCCB to bus bar will be made with aluminium strip of suitable size as directed. (Note :- All the connection of incoming and out going wire in MCCB and MCB will be made with thimble with suitable size as directed). |
| 117 | M&L for earthing complete with galvanised steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 connected to earthing test point including testing on completion including watering GI pipe 20mm bore medium grade, 15mm bore light grade GI pipe for protection of earth lead including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways @ 15cm centre to centre with one handle for lifting made out of 8mm dia MS bar, funnel & wire mesh, excavation and earth work in any type of soil complete including dismantling existing all as specified & directed by Engr-in-charge. |
| 118 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete al as specified and directed. |
| 119 | Supply and lay brick common burnt sub class \\"B\\" old size for protection of cable laid in trenches for under ground cable all as specified. |
| 120 | M&L for sand cushioning in trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable and 8cm after laying the cable complete all as specified. |
| 121 | M&L for cable protection GI tubing light grade fixed along the pole/under road/along the wall of size 40 mm bore with necessary clamps all as directed. |
| 122 | Taking down solar water heater device carefully dismantling solar panel with water tube, water tank, rubber gasket, nut bolt from roof complete with assembly and disconnection of cable, DB box and deposite to store. |
| 123 | Fixing only water heater including storage tank, solar collector plate GI tubing and GI channel, water tubing medium grade 15mm bore screwed and socked joints including all reauired fittings fixed to wall and ceiling or laid in floor all as specified and directed. |
| 124 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit Rs. 56,200/- from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender