Tender For Special Repair To Or Md Accn Building No P-726 Qtr No 1-9 At Atal Colony Under Age B/R-Ii At Bb Cantt, Srinagar.
Tender Value
47.79 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
5 days left
EMD
95580
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Or Md Accn Building No P-726 Qtr No 1-9 At Atal Colony Under Age B/R-Ii At Bb Cantt, Srinagar.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Oct-2026 | Corrigendum for Revised BOQ | BOQ | 30-Oct-2026 |
| 2 | 30-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M & L for rendering 10mm thick cement plaster in CM (1:6) on brick work or concrete surfaces finished even and smoothwithout using extra cement including taking down cement plaster and removing the debries out side MoD land, complete all as specified and directed.Note:- work is to be executed in Bldgs upto and including 3 storeys. |
| 2 | M & L for 5mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement including taking down cement plaster and removing the debries out side MoD land, complete all as specified and directed.Note:- work is to be executed in Bldgs upto and including 3 storeys. |
| 3 | M & L for Preparation of newly plastered surfaces of walls by using 2 mm thick white wall care putty to obtain smooth/ even finish surface using sand paper and applying two coats of oil bound dismater over a coat of primer, complete all as specified and directed.Note:- work is to be executed in Bldgs upto and including 3 storeys. |
| 4 | M&L Complete removing existing treatment including scraping,removing all mud,cake with wire brush and gunny bags from old plastered of wall/ceiling surfaces by applying 2 mm thick white wall care putty to obtain smooth/ even finish surface using sand paper and applying two coat Oil Bound Distember over a coat of primer complete all as specified and directectedNote:- work is to be executed in Bldgs upto and including 3 storeys. |
| 5 | M&L for 15mm thick rendering in on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair,including taking down plaster and removing the debries out side MoD land, complete all as specified directed.Note :- (i) WPC shall be measured and paid separately.(ii) Work is to be executed in Bldgs upto and including 3 storeys. |
| 6 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over New surfaces including and over 2 mm thick white exterior acrylic wall care putty to obtain smooth/ even finish surface using sand paper complete all as specified and directed. (Bldg upto and including 3 storeys) |
| 7 | M & L for Complete removing existing treatment including scraping,removing all mud,cake with wire brush and gunny bags from old surfaces including and over 2 mm thick white exterior acrylic wall care putty to obtain smooth/ even finish surface using sand paperprepararion for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over, complete all as specified and directed.Note:- work is to be executed in Bldgs upto and including 3 storeys. |
| 8 | M&L for Preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.Note:- work is to be executed in Bldgs upto and including 3 storeys. |
| 9 | M&L for Preparation of old painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.Note:- work is to be executed in Bldgs upto and including 3 storeys. |
| 10 | Supply only integral water proofing compound, complete all as specified and directed. |
| 11 | M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc including demolition brick work, complete all as specified and directed. |
| 12 | M&L for wrought Second class hard-wood in scantlings frame work incl Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work, complete all as specified.complete all as specified. |
| 13 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws including Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering, complete all as specified and directed. |
| 14 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws including Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering, complete all as specified and directed. |
| 15 | M&L for 6mm thick Non Asbestos fibre cement /Pre Laminated self embosssed texture designer board E-Board classic size 595x595mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mm x 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 16 | Taking down frame with shutters (without taking off shutters from frame) n.exc 1.5 sq.m each, complete all as specified and directed. |
| 17 | Taking down frame with shutters (without taking off shutters from frame) exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed. |
| 18 | S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 19 | M&L for 35mm thick 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 100mm Wide,10-12mm thk wooden planks both faces smooth. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 20 | S&F 30mm thick 2nd class hardwood factory made glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. with two or more sash bar, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including 300mm ordinary rat tail MS door springs including roller plates, complete all as specified and directed. |
| 21 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, with all fitting and fixtures, complete all as specified and directed. |
| 22 | Supply and fixing factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet , reinforced with steel square tube , complete all as specified and directed. |
| 23 | S&F powder coating of any colour (Thickness or powder coating not less than 50 micron Anodised aluminium window and ventilator shutters, fixed type/sliding type/side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement etc., complete all as specified and directed. |
| 24 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 truck and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws as per architectural drawings, complete all as specified and directed. |
| 25 | S & F aluminium anodized grill 5.5mm thick weight not less than 2.5kg per square (in the shape of expanded metal aluminium xpm jalli) opening size length of expansion (60mm) and width expansion 45mm fixed in aluminium anodized window with ‘F’ channel of handle section with screw, complete all as specified and directed. |
| 26 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and directed. |
| 27 | S&F in repair 5 mm thick sheet glass Tinted/frosted selected quality and glazing with aluminium & rubber beading in squares/rectangular window panes etc., complete all as specified and directed |
| 28 | S & F aluminum anodized, barrel tower bolt of extruded section 200mm long, ISI marked, complete all as specified and directed. |
| 29 | S & F 150 mm long, extruded aluminium alloy handle, fabricated type, complete all as specified and directed. |
| 30 | S & F 100mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 31 | S & F 300 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed. |
| 32 | M&L for cement concrete type B-1 1:2:4 (using 20mm graded agg) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, ramps not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 33 | M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (using 20mm graded crushed stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste forwork & incl Demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 34 | S & F TMT steel bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 35 | S & F Steel work in tubler trusses including special shaped washer etc complete including butt welded tubes confirming to IS-1161-1979 grade St-240, complete all as specified and directed. |
| 36 | M & L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 37 | S & F 18 to 20mm thick HDHMR boards any colour, grade I quality, exterior grade, fixed with nails and screw to timer frame work in shelves of built in wardroves cupboard, partition, pelmet box and similar work including dismantling existing boarding, complete all as specified and directed. |
| 38 | S&F 10-12mm thick 1st class softwood wooden(Australian) panelling fixed with tounged and grouted a wall panelling and including fillets/cornices and 9mm ply wood fixing on wall and two coat of warnishing, polishing and prerparation with seasoning, complete all as specified and directed |
| 39 | S&F 18 to 20mm thick MDF Board making aesthetic design fixed with all necessary arrengement as per site requirment in any situation as in eaves board, complete all as specified and directed. |
| 40 | S & F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 41 | S & F of size 100 mm extruded aluminium handles fabricated type, anodised, complete all as specified and directed. |
| 42 | S & F continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 30 mm, complete all as specified and directed. |
| 43 | S & F 40 mm dia brass polished cup board knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed. |
| 44 | M&L for Second class hardwood plain fillets, square, rectangular or triangular in section of area exceeding 6 Sq. cm and not exceeding 13 Sq. cm, clean sawn, secured with nails or brads, complete all as specified and as directed. |
| 45 | M&L Vitrified Ceramic tiles 10 mm thick dark shade(square/ rectangular) , polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bedor bedding layer in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all as specified and directed. |
| 46 | M&L for Vitrified Ceramic tiles 10 mm thick dark shade(square/ rectangular) , polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado, vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ithe shade of tiles including 10mm thick backing coat in CM 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc complete all as specified and directed. |
| 47 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all specified and directed. |
| 48 | M&L coloured glazed ceramic tiles of size 450x 300x 7mm thick as in skirting/dado, wall, vertical serfaces etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:4, etc including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all as specified and directed. |
| 49 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 50 | M & L for plain cemenr concrete 1:3:6 Type C-2 using 20mm graded crushed stone aggregate, 75mm thick as in sub base of floors finished even and fair, complete all as specified and directed |
| 51 | M&L for rubber moulded Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment laid over 50mm thick sand cushioning, complete all as specified and as directed. |
| 52 | M & L for plain cement concrete 1:2:4 type B1( using 20 mm graded crushed stone aggregate) as in benching, bed plates, filleting and the like including necessary form work and finishing all exposed surfaces, complete all as specified and as directed. |
| 53 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.& Brushing neat cement slurry with 3.0kg of cement per sqmetre, complete all as specified and directed. |
| 54 | M & L for 18mm thick granite (of any type) work (table rubbed and polished and moulding) in platforms, steps, jambs, pillar, counter WHB, floor over and including 20mm thick in cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite, complete all as specified and directed |
| 55 | M & L for machine cut, pre polished (Granite finish) kota stone flooring 20-25 mm thick in steps (Trades and riser) in single piece set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed with grey cement over and including cement screed bed 20mm thick in cement mortar (1:4)for landing and 10mm thick cement plaster in CM (1:3) , complete all as specified and as directed including edges moulding, complete all as specified and directedNote\:- All exposed surface shall be round/bull nosed to aminimum radius of 5mm and two parallel grooves ten by ten( 10mm x 10mm ) immeadiately behind the noising shall be provided and cost of the same is included in the rates quoted by the contractor. |
| 56 | M &L for machine cut, pre polished (Granite finish) kota stone slab 20-25mm thick on vertical surface as in Dado/skirting, vertical surfaces etc. .set, jointed & pointed with grey cement slurry over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surfaces, complete all as specified and directed. |
| 57 | S&F 3 layer PPR Polypropylene random co polymer concealed pipes of 20mm outer dia SDR7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors including taking up or down steel tubing and connections for 15mm dia, complete all as specified and directed. |
| 58 | S&F 3 layer PPR Polypropylene random co polymer concealed pipes of 25 mm outer dia SDR7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors c taking up or down steel tubing and connections for 20mm dia, complete all as specified and directed. |
| 59 | S & F 10 litres capacity low level, virgin polypropylene cistern, ISI marked, coloured complete with PVC bend/flush pipe and making all connection including taking down existing high or low level unerviceable flushing cistern and making good the disturbed surface to match with the existing surface, complete all as specified and directed. |
| 60 | Supply and fixing vitreous china wash hand basin white flat back of size 550x400mm with padestal including securing with two No fast nuts minimum 100mm long and supporting CI brackets embedded in wall with PCC (1:2:4) type B0 using 12.5mm graded crushed stone coursed aggregates including all fittings and fixtures like, PVC waste pipe, PVC connections and chromium plated waste coupling, etc fixed in repair, complete all as specified and directed. |
| 61 | Supply and fixing vitreous China squatting pan of Orissa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including lime concrete, making good to disturbed surface of sub base and flooring with the existing surface and connection to flush pipe fixed in repair, complete all as specified and directed. |
| 62 | S & F in repair shower rose chromium plated of 125mm size with swivel joints including, fixing to steel puipe or union of 15mm bore fixed in repairs, complete all as specified and directed. |
| 63 | S & F in repair bib tap screwed down high pressure, cast copper alloy,fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union , complete all specified and as directed. |
| 64 | S & F in repair, angle cock, 15mm dia chromium plated, cast copper alloy, fancy type, ISI marked, screwed down, high pressure with capstan head, screwed both ends for iron pipes or for unions, complete all as specified and directed. |
| 65 | S & F in repair brass tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges , complete all as specified and as directed. |
| 66 | S & F in repairs for Corner Glass shelf 30x300 mm (Big) 225 x 225 mm(medium) &150x150 mm (small) three set, complete all as specified and as directed. |
| 67 | S & F in repairs glass shelf assembly consisting of glass shelf, 60cm long and 12 cm wide with CP bracket and guard railing fixed in repair complete all as specified and directed. |
| 68 | S & F in repair PVC connections 450 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and directed. |
| 69 | S & F in repair PVC connections 600 mm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed. |
| 70 | S & F 450mmx600mm size and 5.5mm thick looking mirror of selected quality, beveled edge glass mounted on 6mm thick AC building board with aluminium beading and rubber packing and fixed to wall with wooden plug with chromium plated brass screw and cup washer fixed in repair, complete all as specified and directed. |
| 71 | S & F in repair stainless steel sink 1.00mm thick, ISI marked for kitchen with plug, waste PVC pipe, washers including cantilever cast iron brackets connecting union waste pipe of size 485 mm x 410 mm with bowl size 410 mm x 350mm x 200 mm etc fixed in repair, complete all as specified and directed. |
| 72 | S & F in repair Sink mixer 2 in 1, chromium plated, fancy type with capstan head handle, screwed down high pressure with lettered hot and cold including CP brass flange and necessary extension nipple screwed for 15 mm dia pipe, complete all as specified and directed. |
| 73 | S&F in repairs 15mm bore Brass CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe and fixed with all connected fittings & fixtures, complete all as specified and directed. |
| 74 | S & F in repair brass chromium plated swan neck, hot and cold central hole, basin mixer for mixing hot and cold water, fancy type with capstan head handle, screwed down high for 15mm bore pipe or union fixed in repair, complete all as specified and directed. |
| 75 | S & F in repair stainless steel plate rack 1mm thick of size 600 x 900 x 250 mm with stainless steel screw to wall, complete all as specified and directed. |
| 76 | S& F in repair PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate of 110 mm dia etc., complete all as specified and directed. |
| 77 | S&F rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres, hoisted and fixed in position including brass float valve, gun metal valve, tank nipple etc all as specified in SSR Part I and including dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity etc., complete all as specified and directed. |
| 78 | M&L for plain cement concrete type C-1 1:3:6 (using 20mm graded crushed stone aggregate) 75mm thick as in plinth protection and paving laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25, complete all as specified and directed. |
| 79 | M & L for plain cement concrete 1 : 4 : 8 Type D2 (using 40 mm graded crushed stone aggregsate) as in foundation, filling and mass concrete, complete as specified and directed. |
| 80 | M&L for walling of random rubble masonry built in cement mortar 1:6, uncoursed, well bonded, bedded and solidly hearted and pointing flush the surface in contact with earth in the same mortar as the work proceeds including necessary weep holes at 2m centre to centre as in retaining wall,including demolitionof old stone wall, complete all as specified and directed. |
| 81 | S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls & Taking down pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 82 | S&F 75 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls Taking down pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 83 | M&L for plain cement concrete 1:5:10 Type E-2 (using 40mm graded crushed stone aggregate) with broken brick bats as in filling in sunken slab complete all as specified and directed including demolition of existing concrete and removal of debries out side MoD land, complete all as specified and directed. |
| 84 | M&L for providing water proofing treatment to sunken floor complete all as per following specifications:-(i) Providing 20mm thick cement plaster in cement mortar 1:3 in two layers 10mm thick each mixed with Pidi Proof LW or Dr Fixit @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement over two coat of cement slurry mixed with SUPER LATEX of Pidilite in proportion 1:4:7 (SUPER LATEX : Water: cement)(ii) Application of two coats of polymer modified bituminous elastomeric water proof coating i.e proof coat Black of Pidilite @ approx 0.50 Kg per sqm for two coats of 300 micron each.(iii) Providing GI pipe 40mm dia spout pipes Note:- (a) The rate includes for preparation of surface treatment and sealing of all joints, cracks, corners and junction of pipes etc and ponding test complete all as specified and directed by Engineer-in-Charge .(b) PCC filling shall be measured and paid separately. |
| 85 | S&F low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/sqcm fixed to walls, floors etc of 32mm bore as in spouts for sunken slabs, complete all as specified and directed. |
| 86 | Cutting into existing manholes of internal dia of pipe 150mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished , and reforming benching as required, complete all as specified and directed |
| 87 | Demolition and breaking up drain pipes (Salt glazed ware, AC orReinforced concrete) set in cement mortar, complete all as specified and directed. |
| 88 | S&F 150mm bore of pipe reinforced concrete pices class Np-2 laid jointed complete with collers, complete all as specified and directed. |
| 89 | M&L for plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) concrete bed to drain pipes 150mm including packing under, and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed. |
| 90 | S&F in repair 25mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets & domes (two in each door and window), complete all as specifeid and directed. |
| 91 | M&L for stainless steel plate 1-1.5mm thick including laser engraving of letter/number/ design/ symbols/ patterns of any colour & fixing arrengement as per site requirment, complete all as specifeid and directed. |
| 92 | Material and labour for plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate, 25mm thick, as levelling course as in roof padding etc , finished even and fair with 2% to3% WPC all as instruction of manufaturer and removing the existing detoreated surface and make preparation before putting padding , complete all as specified and directed. |
| 93 | M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc., complete all as specified and directed. |
| 94 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing of all the old materials from the site for to taking as a schedule of credit complete all as specified and directed |
| 95 | M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes 1.2 mm thick or heavy duty PVC box and duly fixed it concealed in wall and overed to top with electro plated 3 mm thick plastic laminated sheet for housing/mounting of switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc complete all as specified and directed for the following :- |
| 96 | One light point / fan point /Exhaust fan controlled by one switch of one way point wiring system, complete all as specified and directed. |
| 97 | One 3/5 pin type 5 Amp socket outlet point fixed on same board and controlled by one switch of one way point wiring system, complete all as specified and directed. |
| 98 | One 3/5 pin type 5 Amp socket outlet point fixed on independent board and controlled by one switch of one way point wiring system, complete all as specified and directed. |
| 99 | Description all as per serial item No 95 here-in-before, but using single runs of PVC insulated FRLS wire ,1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) (ISI Marked) for15 Amp socket outlet point wiring system with controlled by one way switch and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire, complete all as specified and directed. |
| 100 | Supply and fixing of modular type switch of 5/6 Amps 220 Volts AC, one module , complete all as specified and directed. |
| 101 | Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular , complete all as specified and directed. |
| 102 | Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module, complete all as specified and directed. |
| 103 | Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete as specified and directed. |
| 104 | Supply and fixing ceiling rose 03 terminals type made out of polycarbonate , isolated body complete all as specified and directed. |
| 105 | Supply and fixing of modular type bell push flush type single pole one way, complete all as specified and directed. |
| 106 | Supply and fixing in replacement bell Ding Dong Type, 220 volt AC, Single Pole complete as per specified and directed. |
| 107 | Supply and fixing of angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adhapor and back plate for housing of bulb complete all as specified and directed . |
| 108 | Supply and fix LED lamp 9 watt, complete all as specified and diected. |
| 109 | Supply and fixing of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control knob, complete all as specified and directed. |
| 110 | Supply and fixing of LED tube light fitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting, comlplete all as specified and directed . |
| 111 | Supply and fixing of LED tube light fitting with high out put diffuuser 2 feet long of 9/10 Watt 220 volt AC decorative type with driver holder and LED lamp with having energy efficient type complete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete all as specified and directed . |
| 112 | Supply and fixing of surface wall mounted decorative bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adhaptor suitable used for 7.5W / 9 W LED filament lamp E27 base system including providing of 1N x 9W LED lamp in required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flate fexible two/three core cable and making electric connection, complete all as specified and directed. |
| 113 | Supply and fixing surface mounted LED decorative type angle adjustable sport light / bed side study lamp light fitting with lamp in matt finish for premium aesthetics with based of suitable rating capacity 7Watt LED fixture in required fitting use in both warm/white type colour complete light fitting set and including providing of suitable type of flate fexible two/three core cable and making electric connection complete all as specified and directed. |
| 114 | Supply and fixing of LED street light fitting of rated capacity 35Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete light fitting set including providing of suitable dia of GI bracket and it to as per match/setting thefitting fixture base hole attechment system and including providing of suitable type of flate fexible two/three core cable and makong electric connection all as specified and directed. |
| 115 | Supply and fixing of ventilating exhaust fan made out of complete sturdy engineering plastic body with having motor ,frame louvers & shutter and blade suitable for of size 250 mm 230 Volts including making of suitable type /size of hole on wall etc., compete all as specified and directed. |
| 116 | Taking down of existing 300 mm Metal Type exhaust fan complete from wall/window mounting, disconnecting electrical connections, dismantling of all components, thorough cleaning of blades, body, guard and motor assembly, removal of dust, grease and rust, checking of motor winding, shaft, bearings, capacitor and terminal connections, lubrication of moving parts, replacement of defective nuts, bolts, screws, bearing, capacitor and wiring if required, repairing and balancing of fan blades, repainting/polishing of PVC body with anti-rust paint where required, re-assembly, testing and commissioning, refixing in original position complete with all accessories, including all labour, tools, tackles and transportation as directed |
| 117 | Taking down existing 1200 mm sweep ceiling fan from ceiling including disconnecting wiring, dismantling complete fan body, supplying and fixing new fan body/casing with necessary screws, nuts, bolts, down rod, shackle, canopy & rewinding motar etc. including re-assembly of existing motor and blades, connection, testing, commissioning and refixing at original position, complete as required and as directed. |
| 118 | M&L for taking down of old unserviceable electric water storage heating system of capacity 25 ltrs and replacement with by all new one of body parts and it all connected fixing accessories of system like out of PVC /mild steel outer body with back and top plate framing work along with hot water inner tank and glass wool insulation materials with geyser heating assembly with base support MS plate washer and nut bolt & heating elements up to 2KW lamp, controller setting knob, flexible cable with top etc of system and after replacement of new body parts refixing/ hanging the on same place of wall with the help of nut, bolt etc complete including providing of suitable type flat flexible cable and making electric connection, complete all as specified and directed |
| 119 | Supply and fixing of sheet metal enclosure duly powder coated with double pole and neural enclosure with a two pin and earth plug and top and having mounting chanel and complete with one 01 MCB SP 20 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed on wall and making good the disturbed wall surface all as required at site, complete all as specified and directed. |
| 120 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 volt 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TP 100 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 08 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed |
| 121 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type of distribution board of rating SPN 12 way type 220 volt AC supply system and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoing system complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs, complete all as specified and directed. |
| 122 | Supply and fixing of MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed |
| 123 | S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity, complete all as specified and directed |
| 124 | Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 2 Run of 10 Sqmm and 1 Run of 10 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface, complete all as specified and directed. Note: 3 runs of 10 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 125 | Notes :-An amount of Rs 1,07,359.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 06, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender