Tender For Repair Of Wooden Furniture Under Bso Of Ge(S) Bathinda At Bathinda Mil Stn
Tender Value
45 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
12 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair Of Wooden Furniture Under Bso Of Ge(S) Bathinda At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | M&L to repair Table Peg by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde).Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-384/277/236) |
| 2 | Top (460mm x 310mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge. |
| 3 | Leg made out of first class teakwood. |
| 4 | Front rail made out of first class teakwood. |
| 5 | Side rail made out of first class teakwood. |
| 6 | Bottom rail made out of first class teakwood. |
| 7 | S&F PVC shoe 15mm dia of approved quality. |
| 8 | Removing of old wooden polish from complete surfaces of Table Peg (FD-266/277/384/236), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 9 | M&L to repair Teapoy by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-382/278/232/34) |
| 10 | Top (460mm x 610mm) made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge. |
| 11 | Leg made out of first class teakwood. |
| 12 | Front rail made out of first class teakwood. |
| 13 | Side rail made out of first class teakwood. |
| 14 | Bottom rail made out of first class teakwood. |
| 15 | S&F PVC shoe 20mm dia of approved quality. |
| 16 | Removing of old wooden polish from complete surfaces of Teapoy (FD-34/232/278/382), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 17 | M&L to repair Table Center by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-134/235/ 274) |
| 18 | Top 910mm x 460mm) made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge. |
| 19 | Leg made out of first class teakwood. |
| 20 | Front rail made out of first class teakwood. |
| 21 | Side rail made out of first class teakwood. |
| 22 | Bottom rail made out of first class teakwood. |
| 23 | S&F PVC shoe 20mm dia of approved quality. |
| 24 | Removing of old wooden polish from complete surfaces of Table centre (FD-29/134/235/274/375), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 25 | M&L to repair Table 900mm x600mm without drawer by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde).Rest all as per drawings and directed by Engr-in-charge.(DRG NO. FD-284/231/223/55/42(M)) |
| 26 | Top made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 27 | Leg made out of first class teakwood. |
| 28 | Front/rear rail made out of first class teakwood. |
| 29 | Side rail made out of first class teakwood. |
| 30 | Stiffener made out of first class teakwood. |
| 31 | S&F PVC shoe 20mm dia of approved quality. |
| 32 | Removing of old wooden polish from complete surfaces of Table 900x600x760mm w/o drawer (FD-42/231/284/223/55), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 33 | M&L to repair Table 900mm x600mm with drawer by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by Engr-in-charge.(DRG NO. FD-283/224/41) |
| 34 | Top (910mm x 610mm) made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 35 | Leg made out of first class teakwood. |
| 36 | Front/side rail made out of first class teakwood. |
| 37 | Stiffener made out of first class teakwood. |
| 38 | Back rail made out of first class teakwood. |
| 39 | Drawer complete excluding knob. |
| 40 | Front of drawer made out of 18mm thick prelaminated paticle board and 4mmx18mm teakwood beading complete excluding knob. |
| 41 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 42 | Side/back of drawer made out of 12 mm thick plywood BWR Gde complete. |
| 43 | S&F PVC shoe 20 mm dia of approved quality. |
| 44 | Removing of old wooden polish from complete surfaces of Table 900x600x760mm with drawer (FD-41/224/283), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 45 | M&L to repair Table 900mm x900mm by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing and directed.(DRG NO. FD-291) |
| 46 | Top (910mm x 910mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. |
| 47 | Leg made out of first class teakwood. |
| 48 | Rail made out of first class teakwood. |
| 49 | S&F PVC shoe 25mm dia of approved quality. |
| 50 | Removing of old wooden polish from complete surfaces of Table 900x900x760mm (FD-88/291), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 51 | M&L to repair Hat stand with mirror by replacing the following parts with approved ones. Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-233/361) |
| 52 | Plywood 3.5/4mm thick OSTF. |
| 53 | First class TW beading at all around of frame. |
| 54 | Mirror 5mm thick. |
| 55 | Brass peg 115-120mm long. |
| 56 | Aluminium nail hook 50mm long. |
| 57 | Removing of old wooden polish from complete surfaces of Hand stand with mirror (FD-206/233/361), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 58 | M&L to repair Table dining (1200mmx900mm) by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing and directed by Engr-in-charge.(DRG NO. FD/MAP-II/03) |
| 59 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawing and directed by Engr-in-charge. |
| 60 | Leg made out of first class teakwood. |
| 61 | Front/rear rail made out of first class teakwood. |
| 62 | Side rail made out of first class teakwood. |
| 63 | Stiffener made out of first class teakwood. |
| 64 | S&F PVC shoe 25mm dia of approved quality. |
| 65 | Removing of old wooden polish from complete surfaces of Table dining 1200x900x760mm (FD/MAP-II/03), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 66 | M&L to repair Table dining 6 person by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-273/239/30(M)/FD/MAP-II/03) |
| 67 | Top ( 1510mm x 910mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 68 | Leg made out of first class teakwood. |
| 69 | Front rail made out of first class teakwood. |
| 70 | Side rail made out of first class teakwood. |
| 71 | Stiffener made out of first class teakwood. |
| 72 | S&F PVC shoe 25mm dia of approved quality. |
| 73 | Removing of old wooden polish from complete surfaces of Table dining 6 person (FD-239/273/376), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 74 | M&L to repair Table dining 8 person by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-273/239/30(M)) |
| 75 | Top (1810mm x 910mm) made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 76 | Leg made out of first class teakwood. |
| 77 | Front rail made out of first class teakwood. |
| 78 | Side rail made out of first class teakwood. |
| 79 | Stiffener made out of first class teakwood. |
| 80 | S&F PVC shoe 25mm dia of approved quality. |
| 81 | Removing of old wooden polish from complete surfaces of Table dining 8 person (FD-239/273/376), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 82 | M&L to repair Table dressing gents with mirror by replacing the following unserviceable parts with first class /teakwood/prelaminated MDF board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-230/31(M)) |
| 83 | Top made out of 18mm thick pre-laminated MDF board exterior gde OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided teakwood beading infront of suitable size. |
| 84 | All as per item no 11.01 but bottom complete. |
| 85 | All as per item no 11.01 but side complete. |
| 86 | Back ply of base made out of plywood 12mm thick( 9 ply) BWR gde complete. |
| 87 | Only Mirror 5mm thick of suitable size. |
| 88 | Back of mirror made out of plywood 6mm thick BWR Gde complete. |
| 89 | Drawer complete excluding knob. |
| 90 | Front of drawer made out of 18mm thick prelaminated MDF board and teakwood beading complete excluding knob. |
| 91 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 92 | Side/back of drawer made out of 12 mm thick (9ply) plywood BWR Gde complete. |
| 93 | Removing of old wooden polish from complete surfaces of Table dresssing Gents with mirror (FD-31/230/379), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 94 | M&L to repair Table dressing ladies with mirror by replacing the following unserviceable parts with first class teakwood/prelaminated MDF board (exterior gde)/plywood MR gde.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-251/32(M)) |
| 95 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided teakwood beading infront. |
| 96 | All as per item no 12.01 but bottom complete. |
| 97 | All as per item no 12.01 but side complete. |
| 98 | Back ply of base made out of plywood 12mm thick (9ply) BWR gde complete. |
| 99 | Only Mirror 5mm thick of suitable size. |
| 100 | Back of mirror made out of 6mm thick BWR Gde plywood. |
| 101 | Plain glass 5 mm thick for sliding. |
| 102 | Aluminium channel complete of suitable size for sliding of glass. |
| 103 | Drawer complete excluding knob. |
| 104 | Front of drawer made out of 18mm thick prelaminated MDF board and 4mmx18mm teakwood beading complete excluding knob. |
| 105 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 106 | Side/back of drawer made out of 12 mm thick (9ply) plywood BWR Gde complete. |
| 107 | Leg with frame made out of first class teakwood. |
| 108 | Removing of old wooden polish from complete surfaces of Table dresssing Laddies with mirror ( FD-32/251/378), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 109 | M&L to repair Side board by replacing the following items with teakwood /prelaminated MDF board (exterior gde)/ plywood BWR Gde.Rest all as per drawings and directed by Engineer-in-Charge. (DRG NO. FD-241/371) |
| 110 | Top made out of 18mm thick pre-laminated MDF board exterior grade OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided first class teakwood beading infront of suitable size. |
| 111 | All as per item No 13.01 but bottom complete. |
| 112 | All as per item No 13.01 but side complete. |
| 113 | All as per item No 13.01 but partition complete. |
| 114 | All as per item No 13.01 but single shutter duly provided teakwood beading on edges complete excluding knob. |
| 115 | All as per item No 13.01 but shelf 18mm thick complete. |
| 116 | Back ply 6mm thick BWR gde complete. |
| 117 | Legs with complete frame made out from first class teak wood. |
| 118 | Drawer complete excluding knob. |
| 119 | Front of drawer made out of 18mm thick prelaminated MDF board and 4mm x 18mm teakwood beading excluding knob. |
| 120 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 121 | Side/back of drawer made out of 12mm thick (9 ply) plywood BWR gde complete. |
| 122 | Removing of old wooden polish from complete surfaces of Side Board (FD-26/241/371), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 123 | M&L to repair Bin linen multipurpose by replacing the following items with teakwood /prelaminated MDF board (exterior gde)/ plywood BWR gde. Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/09) |
| 124 | Top made out of 18mm thick pre-laminated MDF board exterior grade OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided first class teakwood beading infront of suitable size. |
| 125 | All as per item No 14.01 but bottom complete. |
| 126 | All as per item No 14.01 but side complete. |
| 127 | All as per item No 14.01 but partition complete. |
| 128 | All as per item No 14.01 but single shutter (left) duly provided teakwood beading on edges complete excluding handle. |
| 129 | All as per item No 14.01 but single shutter (right) duly provided teakwood beading on edges complete excluding handle. |
| 130 | All as per item No 14.01 but shelf (left) complete. |
| 131 | All as per item No 14.01 but shelf (right) complete. |
| 132 | Back ply 12mm thick (9 ply) BWR gde. |
| 133 | Legs with complete frame made out from first class teak wood. |
| 134 | Drawer complete excluding handle. |
| 135 | Front of drawer made out of 18mm thick prelaminated MDF board and teakwood beading of suitable size excluding handle. |
| 136 | Bottom of drawer made out of 18mm thick prelaminated MDF board complete. |
| 137 | Side/back of drawer made out of 18mm thick prelaminated MDF board and PVC beading of suitable size. |
| 138 | CP handle 100mm long of approved quality. |
| 139 | Removing of old wooden polish from complete surfaces of Bin linen multipurpose (FD/E6/MAP/09), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 140 | M&L to repair Table writing by replacing the following unserviceable parts with first class teakwood/prelaminated MDF board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed.(DRG NO. FD-275/249/33(M)) |
| 141 | Top (1150mm x 610mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 142 | Leg made out of first class teakwood complete. |
| 143 | All as per item no 15.01 but front rail complete. |
| 144 | All as per item no 15.01 but side rail complete. |
| 145 | All as per item no 15.01 but side stiffener complete. |
| 146 | All as per item no 15.01 but center stiffener complete. |
| 147 | All as per item no 15.01 but side of cabinet complete. |
| 148 | All as per item no 15.01 but bottom of cabinet complete. |
| 149 | All as per item no 15.01 but shutter of cabinet complete. |
| 150 | Back of cabinet made out of plywood 6mm thick BWR gde. |
| 151 | Shelf of cabinet made out of plywood 12 mm thick BWR gde complete. |
| 152 | Drawer complete excluding knob. |
| 153 | Front of drawer made out of 18mm thick prelaminated MDF board and 4mmx18mm teakwood beading complete excluding knob. |
| 154 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 155 | Side/back of drawer made out of 12 mm thick (9ply) plywood BWR Gde complete. |
| 156 | Brass lock of suitable size with duplicate key complete. |
| 157 | S&F PVC shoe 25mm dia of approved quality. |
| 158 | Removing of old wooden polish from complete surfaces of Table writing (FD-33/249/268/275), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 159 | M&L to repair TV Trolley by replacing the following unserviceable parts with first class teakwood/prelaminated MDF board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed.(DRG NO. FD/E6/MAP/04) |
| 160 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side with half round teakwood beading all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 161 | All as per item no 16.01 above but bottom complete. |
| 162 | All as per item no 16.01 above but shelf complete. |
| 163 | All as per item no 16.01 above but side complete. |
| 164 | All as per item no 16.01 above but back complete. |
| 165 | Glass shutter 5mm thick with hinges of suitable size. |
| 166 | Wheel roller of approved quality. |
| 167 | Magnet catcher of suitable size. |
| 168 | Removing of old wooden polish from complete surfaces of TV Trolley FD/E6/MAP/04), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 169 | M&L to repair Table Bed Side by replacing the following unserviceable parts with first class teakwood/prelaminated MDF board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed.(DRG NO. FD-276/248/210) |
| 170 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side with approved shade and balancing white on other side duly provided teakwood beading infront of suitable size. |
| 171 | All as per item no 17.01 above but side complete. |
| 172 | All as per item no 17.01 above but bottom complete. |
| 173 | All as per item no 17.01 above but shelf 12mm thick complete |
| 174 | Back ply 6mm thick MR Gde complete. |
| 175 | S&F PVC shoe 25mm dia of approved quality. |
| 176 | Removing of old wooden polish from complete surfaces of Table Bed Side (DRG NO. FD-276/248/210), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 177 | Taking out carefully old existing Knob from side board, table dressing gents, table dressing ladies etc and S&F new decorative Knob 32mm dia of approved quality. Rest all as directed by Eng-in-charge. |
| 178 | Taking out u/s Bearer of suitable Size from different type of tables likes side board, table writing, table 900 x 600mm with drawer etc and S&F new Bearer of suitable size, made out of first class teakwood complete. Rest all as directed by Eng-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender