Tender For Maintenance / Repair Of Bed Hard For Md Accn Under Bso Of Ge(S) Bathinda At Bathinda Mil Stn
Tender Value
49 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
12 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Maintenance / Repair Of Bed Hard For Md Accn Under Bso Of Ge(S) Bathinda At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | M&L to repair Bed hard (MAP) by replacing the following unserviceable parts with approved ones.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/08,FD/E6/MAP/08(R ) |
| 2 | Plywood 12mm(9 ply) thick BWR Gde size 1990mm x 855m with Nut and Bolt |
| 3 | Nut and bolt of suitable size complete for Bed as required |
| 4 | Pre-laminated MDFboard(exterior gde) of Head rest complete. |
| 5 | Pre-laminated MDFboard(exterior gde) of foot rest complete. |
| 6 | S & F PVC/Hard rubber toe of suitable size. |
| 7 | Preparation of old painted iron & steel surface (externally and internally complete) of Bed Hard MAP (FD/E6/MAP/08,FD/E6/MAP/08(R) by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. |
| 8 | M&L to repairs Bed plywood top by replacing the following unserviceable parts with first class teakwood.Rest all as per drawings and directed by Engr-in-charge.(DRG NO. FD-246/247/213) |
| 9 | Long leg. |
| 10 | Short leg. |
| 11 | Long rail. |
| 12 | Stiffener. |
| 13 | 3.5 thick teak face plywood, including half round teakwood beading if broken, of both side of head rest complete. |
| 14 | 3.5 thick teak face plywood, including half round teakwood beading if broken, of both side of foot rest complete. |
| 15 | Plywood 12mm thick(9 ply) BWR Gde of suitable size (1980mm x 920mm) in single piece as per shown in drg. |
| 16 | Removing of old wooden polish from complete surfaces of Bed plywood top (Drg No FD-246/247/213), cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying melamine polish till high gloss finish is achieved complete all as specified and directed. |
| 17 | M&L to repairs of Charpoy GI 32mm plytop by yemoving old U/S Plywood from Charpoy GI Pipe Plywood Top and S&F new Plywood 12mm thick ( 9 ply) of BWR Grade ISI Maked of Size 1990x910mm with Nut & Bolt as required. Make of Plywood shall be Archidply (Silvi)/Duro (Duromac)/Centuryply (Sainik)/Greenply (Ecotec) . Rest all as per drawings (FD-220) and directed by Engr-in-charge. |
| 18 | Welding of loose joint of flat Iron of charpoy GI pipe plywood top. |
| 19 | Tightening of complete frame & welding loose joint of GI pipe with frame of charpoy GI pipe plywood top. |
| 20 | M&L for preparation of old surface of flat iron (03 Nos) and painting the same with one coat of synthetic enamelled paint black colour (Ist grade quality) complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender