Tender For Addition/Alteration To Bldg No P-1202, Provn Of Concertina Coil/Barbed Wire In Ipss And Provn Of Wash Room For Cft Crew At Af Stn Gwalior
Tender Value
44.15 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
15 days left
EMD
88300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Bldg No P-1202, Provn Of Concertina Coil/Barbed Wire In Ipss And Provn Of Wash Room For Cft Crew At Af Stn Gwalior
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters exceeding 1.50 Sqm but not exceeding 4 Sqm each (Aluminium windows & Aluminum Doors) (without taking off shutters from the frames) including builders hardware & glass etc complete all as specified & directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n. exc 1.5 Sqm each including iron mongories complete all as specified and directed. |
| 3 | S&F UPVC sound proof door frame with shutter and DGU (double glazed unit) (5T+12+5T) toughned glass (one glass transparent and one glass tinted) with cylinder of one side key, one side thumb turn and locking system including necessary builders hardware etc, junction of wall and frame sealed with sealent complete all as specified and as directed by Engr-in-Charge. |
| 4 | S&F UPVC luxury casement sound proof side Hung /Tilt &Turn type windows and frame with DGU (double glazed unit) (5T+12+5T) toughned glass (one glass transparent and one glass tinted) with cylinder of one side key, one side thumb turn and locking system including necessary builders hardware etc, junction of wall and frame sealed with sealent complete all as specified and as directed by Engr-in-Charge. |
| 5 | S&F UPVC luxury casement sound proof fixed type windows and frame with DGU (double glazed unit) (5T+12+5T) toughned glass (one glass transparent and one glass tinted) including necessary builders hardware etc, junction of wall and frame sealed with sealent complete all as specified and as directed by Engr-in-Charge. |
| 6 | M&L for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, in CM 1:4 jointing and pointing to match existing work, complete. |
| 7 | M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:4 incl demolition complete all as specified and directed. |
| 8 | Taking down cement plaster on brick or stone surface or stone wall surfaces including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 9 | M&L for 8-12mm thick rendering on fair faces of brick work or concrete surfaces with ready mix cement plaster and finished the surface even and smooth complete all as specified and directed. |
| 10 | M&L for Preparation of newly plastered surface and applying two coat of distemper oil emulsion white or tinted over a coat of putty and primer complete complete all as specified and directed.(81+12) |
| 11 | M&L for Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers and applying a coat with putty to make the surface even and smooth matching to the adjacent wall surfaces and applying two coats distemper oil emulsion by the use of rollers, over a coat of primer all as specified and directed. |
| 12 | M&L for Preparation of old decorated surface of wall include brooming down with steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, including filling the cracks and depressions and applying one coat of distemper oil emulsion by the use of rollers white or tinted as approved on ceiling surface complete all as specified and directed. |
| 13 | S&F 4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic ) decorative finish fixed with screws to snap grid including pre powder coated GI frame with suspension system (Grid) comprising of T section 25mmx32.5mmx1.6mm size as main runners and wall angle to placed along the wall at desired level of the False ceiling , 4mm dia GI suspender of suitable size and dash fastners to be provided at desired distance including re-fixing false ceiling lights, electric fittings/fixture etc including dismantling of existing false ceiling with snap grid, cover fillets etc. complete all as specified and directed. |
| 14 | S&F in repair 3.00mm thick Vinyl flooring / PVC tiles or sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors, approved by GE etc complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for glazed coloured ceramic tiles 300 x 450 x 7 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces etc over 10mm thick rendering on fair faces of wall or conc surfaces in CM 1:3 finished rough for wall tiling or in skirting/dado etc complete all as specified and directed.(109+24.99) |
| 16 | M & L for MS work as in Grills/doors, gratings, Hooks etc with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladder framed balusters, walk way, railings, frame work of water tanks ad similar work conforming to Fe290 Gde E-165 including ornamental wk in door complete all as specified and directed. |
| 17 | M & L for MS work as in swan neck / brackets etc for fencing post & strut in fencing, Flat iron for securing chain link fencing etc including cutting tops to shape as directed, drilling holes, riveting for wires etc including all necessary drilled bolting or riveting etc and similar work conforming to Fe290 Gde E-165 complete all as specified and directed. |
| 18 | S & F galvanized 2 stranded steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and fixing to any type of standard hooks, including securing and tying at crossing with and provision of galvanized mild steel wire staples or steel pins etc complete all as specified and directed. |
| 19 | S&F concertina coil size exc 600 mm in one rows between the double layer fencing including all fixing arrangement complete all as specified and directed . |
| 20 | M&L for Preparation of new steel surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.(181.07+.51) |
| 21 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil all as specified and directed. |
| 22 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cables, cess pits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil all as specified and directed.(2.64+102.6) |
| 23 | all as per item herein before but depth exceeding 1.5 m and not exceeding 3 m all as specified and directed. |
| 24 | M&L for Hard core of gauge n.exc 63 mm , with broken stone or boulders , deposited, spread and levelled in layers n.exc 15 cm thick, watered and well rammed to a true surface all as specified and as directed. |
| 25 | M&L for PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation, filling and mass concrete all as specified and directed. |
| 26 | Use and waste of formwork to sides of pillars, posts, struts, piers, column and stanchions for rough finished surfaces of concrete square, Circular rectangular on plan or polygonal all as specified and directed. |
| 27 | Use and waste of formwork to sides of sides and soffits of floor or roof beams, beam hauncheing, girders, bressmmers, lintels cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc all as specified and directed. |
| 28 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) all as specified and directed. |
| 29 | M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specified and directed. |
| 30 | M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts all as specified and directed. |
| 31 | M&L for Reinforced cement concrete M25 (Design Mix) using 20 mm graded stone aggregate as Slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck salb and in shelves and the like all as specified and directed. |
| 32 | M&L for Mild steel TMT reinforcement Bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clip all as specified and directed. |
| 33 | M&L for Mild steel TMT reinforcement bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clip all as specified and directed. |
| 34 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.(4.18+45.79) |
| 35 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed..(7.47+56.81) |
| 36 | M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 37 | M&L for 75 mm thick PCC 1:4:8 type D-2, (using 40 mm graded aggregate) as sub base finished even and smooth with using extra cement complete as specified and directed. complete all as specified and directed. |
| 38 | M&L for 75m mm thick plain cement concrete type C-2, 1:3:6 mix using 20mm graded stone aggregate as in plinth protection, pavings, path etc. surface finished even and smooth without using extra cement complete as specified and directed. |
| 39 | M & L for PCC (1:2:4) type B-0, using 12.5mm graded stone aggregate as in coping including necessary form work complete all as specified and directed. |
| 40 | M&L for Rendering 10 mm thick in cement plaster 1:6 on fair faces of Brickwork/ concrete surfaces finished even and smooth without using extra cement all as specified and directed. |
| 41 | M&L for 60 mm thickness Machine pressed precast concrete interlocking paver block any shape and size of M-35 Grade confirming to IS 15658-2006 with grey cement and no pigment including 25mm thick sand cushioning complete all as specified and as directed. |
| 42 | M & L 15 mm thick rendering in CM 1:4 on fair faces of bricks/concrete, finished even & smooth without using extra cement and mixed with water proofing compound (liquid type) @ 200 ml per 50 Kg of cement complete all as specified and directed by Engineer-in-Charge. (Note : WPC (liquid type) shall be measured and paid separately as supply only) |
| 43 | M&L for Preparation of newly plastered surface and applying two coat of weather coat exterior emulsion white or tinted by the use of rollers over a coat of primer as approved complete all as specified and directed. |
| 44 | Supply only Liquid water proofing compound. |
| 45 | M&L for Rendering 5 mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement all as specified and directed. |
| 46 | M & L preperation and applying three coats of white wash in ceiling surface complete all as specified and directed. |
| 47 | M & L for 10 mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note:Water proofing compound shall be measured and paid seprerately under respective item of \\"BoQ\\") |
| 48 | M&L for hybrid (acrylic+ polyurethene) based waterproofing flexible liquid applied membrane single component, three coat system reinforced with fibre mesh having crack bridging upto 2mm and elongation upto 200% and dry film thickness(DFT) 1000 microns with Heat reflective system for all types of exposed roof slabs (new and old) terraces (sloped and flat) complete all as specified and directed. |
| 49 | S&F Vitreous China urinals half stall type flat back white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing flush pipe grating and union for discharge pipe including CP urinal spreader complete all as specfied and directed. |
| 50 | S&F vitreous china squatting pan 'Orrisa' pattern size 580 x 440 mm white integral floor rests ( excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe, anti syphonage pipe etc complete including making good to floor complete all as specified and directed. |
| 51 | S & F vitreous china wash basin, white, flat back size 550 X 400mm including waste pipe complete all as specified and directed. |
| 52 | M&L for Non - skid joint free coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed (1:6) including 40 mm thick PCC 1:2:4 type B-1 as in flooring for levelling course surface even and fair complete all as specified and directed. |
| 53 | S&F rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 500 Ltr capacity complete all as specified and directed. |
| 54 | S & F for 10 litre capacity PVC valve less symphonic action type flushing cistern low level , white , with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 55 | S&F looking mirror of size 450x600 with selected quality glass mounted on 6mm thick AC board on back side with PVC frame and fixed with chromium plated screws and cup washers complete all as specified and directed. |
| 56 | S&F for 110 mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed. |
| 57 | S&F 110mm PVC(SWR) bends fixed to PVC pipes with necessary solvent cement complete all as specfied and directed. |
| 58 | S&F 110mm PVC(SWR) junction single, (Single T) eual or unequal fixed to PVC pipes with necessary solvent cement complete all specfied and directed. |
| 59 | S&F for 75mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed. |
| 60 | S&F 75mm PVC(SWR) bends fixed to PVC pipes with necessary solvent cement complete all as specfied and directed. |
| 61 | S&F 15mm bore Angle valve fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 62 | S&F 15mm bore pillar tap fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 63 | S&F 15mm bore chromium plated fency type long body bib taps cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. |
| 64 | S&F Brass CP Bottle trap 32mm bore with 250mm and 190mm long wall connections pipes including necessary packing, complete all as specified and directed. |
| 65 | S&F 15mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc. complete all as specified and directed. |
| 66 | S&F 20mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc. complete all as specified and directed |
| 67 | S&F urinal / WHB waste pipe, all as specified and as directed. |
| 68 | S&F Factory made solid PVC Moulded door shutter (with Wood free EPS), 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed. |
| 69 | S & F solid PVC moulded door frame of size 50 mm x 47 mm made out of 5 mm thick PVC sheet (shade matching with door shutter) reinforced with MS Square tube and edges will be painted to match with printed sheet complete all as specified and directed. |
| 70 | S&F 150 mm long powder coated Alumi. tower bolt, tint existing to match comp. all as specified and directed. |
| 71 | S&F for 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified |
| 72 | S&F 125 mm long SS hinges, complete all as directed and specified |
| 73 | S&F mild steel ventilator fixed type with glazing bars complete all as directed and specified |
| 74 | S&F 3 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as directed and specified |
| 75 | Supplying ,Laying, jointing and testing XLPE insulated, armoured, heavy duty, aluminum conductor cable 16 sqmm 4 core 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.: |
| 76 | M&L for Sand cushioning and spreading clean, dry, fine river sand for UG electric cable in two layers (8 cm thick before laying the cable & 15 cm thick after laying cable) total 23 cm thick including gentle punning the sand upto 18 cm (total thickness) and consolidated around cable for protection of under ground cable complete all as specified and directed. (Note :- Only punned down thickness shall be measured for payment). |
| 77 | Supply & Laying precast PCC cable concrete/bricks for protection of cable cover LV low voltage type -I flat ISI marked of size 250 mm x 150 mm x 40 mm complete all as specified and directed by Engr-in-charge. |
| 78 | M&L for concealed point wiring with stranded copper conductor 1.5. Sqmm 1100 Volts grade FRLS PVC insulated and unsheathed including 20mm dia medium grade PVC conduit including all accessories, copper conductor cable 1.5 Sqmm insulated and unsheathed PVC cables as earth wire, modular terminal boxes closed recessed type.PVC modular shhet and board complete all as specified and directed for the following :- |
| 79 | (a) One light/ Fan point controlled by one way switch. |
| 80 | (b ) One 5 Amps switch socket combination on independent board. |
| 81 | (c) One 5 Amps socket on same board with other switches. |
| 82 | All as per item here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed. |
| 83 | S&F Modular switch 1 way 6A, 1 module single pole 230 V. |
| 84 | S&F Modular type switch socket out let 3 pin 6 Amps flush type 230 Volts multipurpose, |
| 85 | All as per item here-in-before above but 6 Amps and 16 Amps multipurpose( 3 Pin 16 Amps and one pin 6 Amps controlled by one switch) |
| 86 | M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 2.5 Sqmm, FRLS of voltage rating upto and including 1100 Volts drawn in medium grade 20mm dia PVC conduit along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 2.5 Sqmm as earth continuity conductor complete all as specified and directed. Note:- Two run of single core PVC cable with one run of earth conductor and PVC conduit shall be measured as one unit. |
| 87 | Supply, fixing, connecting & testing of sheet metal enclosures double door (IP-42 Protection), triple pole and neutral vertical type, 8 way DBs for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating complete all as specified and directed. |
| 88 | Supplying and fixing MCB SPN 32 Amps, 240 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive loadfixed in MCB DB complete all as specified and directed. |
| 89 | Supplying and fixing MCB 6 A to 32 A rating, 240 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive loadfixed in MCB DB complete all as specified and directed. |
| 90 | Supply& Fixing LED Batten fittings 1x20 Watt complete with round block etc, incl PVC gutties and flexible wire and connecting to ceiling rose complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F ceiling rose surface backelet ISI marked , 2 to 3 terminal all as specified and directed. |
| 92 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300msweep with, blades, and frame and louvers complete all as specified and directed by Engineer-in-Charge. |
| 93 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 2 TR complete all as specified and directed by Engineer-in-Charge. |
| 94 | Supply and fix in replacement of triple pole and earth encolsure with a threepin and earth plug with socket complete with one triple pole MCB 20 Amps all as specified and directed by Engineer-in-Charge. |
| 95 | S&F MCB single pole, 32 Amps (`C’ series) having current rating 10 KA with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed. |
| 96 | Supply, fixing, connecting & testing of sheet metal enclosures double door (IP-42 Protection), single pole and neutral, 8 way DBs Vertical tipe for using MCBs / MCB isolators with having aluminium bus bars suitable for 200 Amps rating complete all as specified and directed. |
| 97 | Supply and fixing 240V 10KA 'C' curve miniature circuit breaker MCB isolator DP, 63 Amps (`C’ series) having current rating 10 KA and current carrying capacity in the DB complete all as specified and directed. |
| 98 | M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm, FRLS of voltage rating upto and including 1100 Volts drawn in medium grade 20mm dia PVC conduit along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4 Sqmm as earth continuity conductor complete all as specified and directed. Note:- Two run of single core PVC cable with one run of earth conductor and PVC conduit shall be measured as one unit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender