Tender For Special Repair Of Bldg No P-42 (Barber Shop) Of 14 Cosr Under Age B/R-Ii Of Ge 865 Ews, Leh
Tender Value
14.57 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
3 days left
EMD
29200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Bldg No P-42 (Barber Shop) Of 14 Cosr Under Age B/R-Ii Of Ge 865 Ews, Leh
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but including backing), rubbish off the premises, complete all as specified and/or as directed. |
| 2 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15cm thick (below or above ground level) and removing debris ouside MD land, complete all as specified and/or as directed. |
| 3 | Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded stone aggregate as in flooring and finished surface as in received tiles complete all as specified and as directed. |
| 4 | M & L for Non - skid coloured Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile 0.18 sqm not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and/or as directed. |
| 5 | Material & Labour 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m, complete all as specified and as directed. |
| 6 | Taking down chowkhat or frame with shutters (without taking of shutters from the frame) exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc), complete all as specified and/or as directed. |
| 7 | Taking down chowkhat or frame with shutters (without taking of shutters from the frame) not exc 1.5 sqm each any type of door (wooden, aluminium & steel etc), complete all as specified and/or as directed. |
| 8 | S&F in repairs anodised aluminium door powder coated, frame of door made out of aluminium extruded section 100mmx45mmx2.6mm thick, shutter made out of aluminium extruded section 85mmx45mmx2.1mm thick except bottom rail and lock rail, the section of bottom rail and lock rail 100mmx45mmx2.1mm complete with hydraulic floor mounted door closer, ISI marked, aluminium anodised tower bolt 2 Nos, 5.5mm thick tinted/plane glass pane including reoprene dry rubber gasket set, stainless steel screws, hinges, aluminium anodised snap beading including all necessary fittings and fixtures made out of aluminium anodised, complete all as specified and/or as directed. |
| 9 | S&F in repairs anodised aluminium sliding glazed window powder coated of two/three track frame of window made out of aluminium extruded section 90mmx30mmx2.6mm/ 60mmx30mmx2.6mm thick, shutter made out of aluminium extruded section 38mmx20mmx1.5mm thick including holdfast, anodised aluminium handlw of suitable size, necessary joining cleats, glazing clips, 5.5mm thick tinted/plane glass pane including reoprene dry rubber gasket set, stainless steel screws, hinges, aluminium anodised snap beading including all necessary fittings and fixtures made out of aluminium anodised such as handles, locking arrangements, complete all as specified and/or as directed. |
| 10 | S&Fin repair door closer hydraulically regulated designation No 3 universal type, aluminium body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and/or as directed. |
| 11 | Taking down cement plaster on brick/pcc block or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc., complete all as specified and/or as directed. |
| 12 | M&L rendering 15mm thick in CM 1:4 on fair faces of concrete or brick surfaces as in wall finishes even and smooth w/o using extra cement complete all as specified and/or as directed. |
| 13 | M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint, complete all as specified and/or as directed. |
| 14 | M&L for 1st quality acrylic emulsion paint/plastic emulsion paint over a coat of primer and applying wall care putty of 1 mm thickness over plastered surface of required shade including preparing the surface even and smooth with machanically grinder for concept of smart periodical new work of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. |
| 15 | M&L for preparation of old decorated plastered /unplastered surfaces incl cleaning by brooming down or with steel wire brushing scraping down smoke goot, moulded moss and efflorescent salts and cleaning oil and greasy spots and applying two coats of oil bound distember on walls including cleaning the floor/ joinery surfaces, etc complete all as specified and directed |
| 16 | M&L for preparation of of old decorated plastered /unplastered surfaces incl cleaning by brooming down or with steel wire brushing scraping down smoke goot, moulded moss and efflorescent salts and cleaning oil and greasy spots and applying two coats of oil bound distember on ceiling including cleaning the floor/ joinery surfaces, etc complete all as specified and directed |
| 17 | Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity exc 500 ltrs but not exc 1000 ltrs and removing to store, complete all as specified and directed. |
| 18 | Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store, complete all as specified and/or directed. |
| 19 | S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed. |
| 20 | Dismantling of 75 / 110mm bore cast iron ,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia, complete all as specified and directed. |
| 21 | S&f 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in , complete all as specified and directed.loors. |
| 22 | S&f 75mm bore PVC (SWR) pipe bends any radius, complete all as specified and directed. |
| 23 | M&L 75 mm bore PVC (SWR)) multi floor trap with grating including jointing with solvent cement, complete all as specified and directed. |
| 24 | S&F PVC (SWR) 75mm bore vent cowl, complete all as specified and directed. |
| 25 | S&F wash hand basin table top with 32-40mm coupling fixed on granite top grooving and cutting if required with coloured sunmica sheet at all over with stainless steel legs at all corners, complete all as specified and directed. |
| 26 | S&F in repairs 20mm bore stop cock fancy type chromium plated cast copper alloy screw down under high pressure with handle screwed both ends for iron pipe or brass ferrule, complete all as specified and directed. |
| 27 | S&F in repair pillar tap fancy type double lever tall body with 150 mm extension body fixed on granite top for supply of hot or cold water fixeing with washers complete all as specified and directed. |
| 28 | S&F in repair angle valve (one way) 15 mm bore cast copper alloy fancy type, cromium plated with cup complete all a specified and directed. |
| 29 | S&F in repair chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed. |
| 30 | S&F in repair glass shelf corner in shape of arc/semicircle/triangular fixed on walls with screws complete all as specified and directed. |
| 31 | S&F in repair chromium plated/ powder coated towel rack( 1-3 horizontal runners and 1 runner at bottom and min 2 hangers )fixed to walls with screws complete all as specified and directed. |
| 32 | S&F in repair CP brass towel ring(triangular/rectangular/circular) fixed and incl CP brass screws and complete all a specified and directed. |
| 33 | S&F in repair PVC connections 15mm size with CP nuts of length 450-600mm and 3 layer protection of pipe with stainless steel wire mesh and double coated pvc pipe for hot and cold complete all a specified and directed. |
| 34 | S & F in repair bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or BWP commercial plywood and fixed to wooden plugs/PVC rawl plug with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 35 | S&F PVC coated mild steel conduit pipe 25 mm bore (Drapper rod) with a pair of PVC coated MS clamps to hold drapers rod and decoractive attachment at one or both ends of drapers rod, fixed to opening of door/windows (each opening n.exc 1.50m, contained with a pair of clamps and pair of side ornamented attachments), complete all as specified and directed. |
| 36 | S&F Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms), complete all as specified and directed. |
| 37 | S&F in repairs PVC waste pipe 32mm bore with cup and washers complete on new or old locations, complete all as specified and directed. |
| 38 | Demolition brick work / block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and/or directed. |
| 39 | Material and Labour precast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonry with solid blocks,exc.10cm in width and setting in cement mortar 1:6, complete all as specified and/or directed. |
| 40 | S&F in repairs 25mm PP-R Ball valves (brass insert) conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completey as specified for the size 20mm bore, complete all as specified. |
| 41 | M& L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces,complete all as specified and directed. |
| 42 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete including dismantling as specified and directed. |
| 43 | Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members, complete all as specified and directed. |
| 44 | M&L Solid PVC Wall Lining consisting of 5mm thick Plain single side PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed. |
| 45 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed. |
| 46 | M & L for providing and fixing Gypsum boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 4mm dia upto 1200 mm length adjustable clips fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed . |
| 47 | M&L for 7-8mm thick teak wood finish laminated wooden flooring interlocked with each others and its size as directed,over 6 micron polyethylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified and directed . |
| 48 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed. |
| 49 | Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed |
| 50 | M&L for point wiring with copper conductor FRLS cable Multistrand, single core 1.5 Sqmm size for one light point or bell point /Ex: fan Point controlled by one switch including one run of 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling including rectangular PVC board heavy duty type for mounting switches /sockets etc complete all as directed and specified. |
| 51 | All as per Ser item No 50 here-in-before but for one 5/6 Amp socket outlet points on same board controlled by one switch. |
| 52 | All as per Ser item No 50 here-in-before but for one 5/6 Amp socket outlet points on independent board controlled by one switch. |
| 53 | All as per item No 50 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable FRLS multistrand unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall including with 1.6mm thick MS/GI pressed steel sunken box of adequate size, complete all as specified and as directed. |
| 54 | Switch Socket combination 5 pin 6 Amps, flush type universal, complete all as specified and directed. |
| 55 | Socket outlet 5 pin 6 Amps flush type.230 volts, complete all as specified and directed. |
| 56 | Switch Socket combination 5 pin 6 Amps and 16Amps 230 volts, flush type universal, complete all as specified and directed. |
| 57 | Switch piano flush button single pole 6 Amps 230 volts one way, complete all as specified and directed. |
| 58 | Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/ Polycarbonate, isolated body, complete all as specified and directed. |
| 59 | Taking down serviceable LED Light/bulb Kept in store and re-fixing same location including neccessary conection with 3 core copper flexible cable of appropriate size from ceilling rose/PVC connector to light fittings, complete all as specified and directed |
| 60 | Supply and fixing surface/wall mounted LED fittings with LED tube 20 watts, 6000Kcapacity decorative ultra slim round profile LED lighting fixture with extruded aluminium, environmental friendly, energy efficient 4 feet long type bracket including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose/PVC connector to light fittings incl taking down of old and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 61 | Replacement of LED 36watts recessed 2x2 luminaire cool white to enhance the delight of occupants with comfortable experience through its design, glare free & soft illumination and connection of 3 core copper wire with all accessories complete and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 62 | Supply and fix exhaust fan, steel body AC, single phase., 230V of size 300mm sweep with blades, frame and louvers connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 63 | Replacement of MCB DB, TPN, 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar of rating 200 Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 64 | MCB, TPN, AC, 240 volts \\"C\\" series capacity of 63 Amps, 10kA and making connections, complete all as specified & directed. |
| 65 | MCB, SP, AC, 240 volts \\"C\\" series capacity of 6-32 Amps, 10kA and making connections, complete all as specified & directed. |
| 66 | M&L in replacement for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 10 Sqmm along with one run of 10.0 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping complete all as specified and directed. |
| 67 | Deduct Schedule of Credit of Rs (-) 8968.60 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender