Tender For Repair Of Flooring, Leakage/ Seepage, Roof Sheet, Periodical Services For Residential And Non Residential Buildings Including Repair To Sewage Line, Septic Tank, Ovehead Tank And Misc Work At installation Kardip Under Age B/R Kamorta. 8864
Tender Value
38 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
7 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Flooring, Leakage/ Seepage, Roof Sheet, Periodical Services For Residential And Non Residential Buildings Including Repair To Sewage Line, Septic Tank, Ovehead Tank And Misc Work At installation Kardip Under Age B/R Kamorta. 8864/E8
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 sqm each complete all as specified and as directed. |
| 3 | Taking down shutter of any drescription exc 1 sqm but not exc 2 sqm in each panes and refixing the same opening complete all as specified and directed. |
| 4 | Material and labour for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with shine pinned at joints, fixed to wall and making good to wall all as specified and directed. |
| 5 | Supply and fixing 2nd class hardwood factory made plain framed panelled shutters 30mm thick with lock rail and with panels of 12mm thick commercial veneered particle board veneers on both side or with 9mm thick BWP commercial ply, size of members of shutters as specified in IS 1003-Part-I, kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 6 | Supply and Fix 2nd class HW glazed and skeleton shutters 35mm thk, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 7 | Supply and Fixing 3mm thick glass, ordinary quality and glazing with oil and putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 8 | Supply and fix SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples complete all as specified and directed |
| 9 | Hacking out old broken glass any thickness, size and quality from wooden frames or stone, concrete of brick surrounds, glazed with putty or beads all as directed. |
| 10 | Supply and Fixing 3mm thick glass, ordinary quality and glazing with oil and putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 11 | Supply and fix in repairs SS wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples complete all as specified and directed |
| 12 | Supply and fixing Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supporting & fixing in opening as per specification & drawing complete all as specified and directed. |
| 13 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plian colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing of SSR Part II. |
| 14 | Supply and fix in 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21complete all as specified and directed. |
| 15 | Supply and Fix 200mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge. |
| 16 | Supply and fix extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed |
| 17 | Supply and fixing aluminium alloy,anodised, sliding door bolt of length 250mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed. |
| 18 | Material and labour for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink primer including preparation of new wooden surface all as directed and as specified. |
| 19 | Supply and fix in repairs door closer hydraulically regulated aluminium (Die cast body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed. |
| 20 | Material and Labour for pre-laminated particle board 12 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws in timber frame work complete all as specified and directed. |
| 21 | Supply and fix in repairs stainless steel piano type continuous hinges width of flaps 30 mm when open, brass, bright finish or electogalvnized, complete all as specified and directed by Engr-in-Charge. |
| 22 | Supply and fix in repairs extruded aluminium alloy handles, fabricated type, anodised 100mm size complete all as specified and as directed |
| 23 | Material and labour for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 24 | Supply and fix powder coated (minimum thickness of powder coating 50 micron), aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 25 | Demolition of cement concrete(unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 26 | M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, sub base of floors including necessary form work all as specified and as directed. |
| 27 | Material and Labour for 25mm thick plain cement concrete 1:2:4 type B1 using 20mm graded granite stone aggrgate as floor and other similar type of work, and finishing cement concrete surface even and smooth Without using extra cement, complete all as specified and as directed. |
| 28 | Material and Labour for vitrified ceramic tiles 8-10 mm thick polished area of each tiles not exceeding 0.36 sqm of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:6 and pointed in coloured cement to match coloured tiles complete complete all as specified and as directed. . Note:- (i) The colour, shade and pattern shall be approved by the GE during execution work. (ii) No extra cost shall be allowed for Removing and refixing and necesary cutting of door etc if any required during execution of work. |
| 29 | Material and Labour for vitrified ceramic tiles 8-10 mm thick polished area of each tiles not exceeding 0.36 sqm of any shade and any pattern (pattern consists combination of two or more tiles ) as in skirting etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 10mm thick back coat in CM 1:4 and pointed in coloured cement to match coloured tiles complete complete all as specified and as directed. . Note:- (i) The colour, shade and pattern shall be approved by the GE during execution work. (ii) No extra cost shall be allowed for Removing and refixing and necesary cutting of door etc if any required during execution of work. |
| 30 | M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade, incl 15 mm thick rendering in CM (1:6) complete all as specified and directed. |
| 31 | Material and Labour for non-skid coloured ceramic tiles 10mm thick (square/ rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 32 | Material and Labour for glazed ceramic coloured tiles in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 cmplete all as specified. |
| 33 | Supply and fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 40 x 40 x 2mm, cross Tee of size 40 x 40 x 2mm and wall angle of size 40 x 40 x 2mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls complete all as specifed and as directed including provision of with 4mm thick Non Asbestos boards, ordinary type for fixing in 600 mm x 600mm grid, fixed in ceiling, flat or sloping, complete all as specified and directed.Note :- Rate quoted above shall be deemed to include for making holes, cutting chassis if any required and making good to existing walls in cement mortar 1: 3 to match with existing surface finish as directed at site. |
| 34 | Material and Labour for Granite 20mm thick ( of any type table rubbed and polished) work machine cut as in steps, jambs pillars,window cills, cooking platforms and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite and laid over and including 15mm thick cement mortar 1 :4 complete all as specified and directed. |
| 35 | Demolition of brick work / stone boulder / PCC block masonary, built in cement mortar or cement lime mortar including all quoins, arches pillars, etc but excluding ashlar facing, dressed stone works, precast concrete articles and precast concrete block wallings complete all as specified and as directed. |
| 36 | M&L for Pre-cast cement concrete block masonry with solid blocks using type C1(1:3:6) (20mm graded aggregate) ,size exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 37 | Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water, removing rubbish/debris etc complete all as specified and as directed. |
| 38 | Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed. |
| 39 | Material and labour for 15 mm thick rendering on brick/concrete surfaces in two layers in CM 1:4, finishing coat of 5mm thick using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound shall be measured separately. |
| 40 | Supply only integral water proofing compound of approved quality all as specified. |
| 41 | Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 42 | Material and labour for preparation of of new plastered/concrete surfaces of walls and applying two coats of acrylic distemper of approved shade/tint over a coat of primer, over 1mm thick wall care putty finish to achieve uniform smooth surface of wall all as specified and as directed. |
| 43 | M&L for complete removal by Washing, rubbing down and stopping and preperation of distempered and painted surfaces of walls, pillars,cornices by brooming down etc including filling depressions of scrapped surfaces with wall care putty (1 mm thick) and preparation of surfaces for further treatment and applying two coats of distemper oil emulsion over a coat of primer complete all as specified & directed. |
| 44 | Material and Labour for preparation of old decorated surfaces of ceiling/soffit of chajja and canopy (plastered or unplastered) and cornices, by brooming down with wire brushing or scrapping down smoke soot, moulds, mass and effloroscent salts, removing of nails, making good holes, cracks etc. and applying two coat of white wash complete all as specified and as directed. |
| 45 | Material and labour for complete removal of existing treatment on wall surfaces, preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of Distemper oil emulsion over a coat of primer on wall surfaces. |
| 46 | Preparation of old plastered / unlplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 47 | Preparation of old plastered / unlplastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 48 | M&L for preperation of old plastered surfaces on brick/concrete of walls etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 49 | Taking up or down steel tubing 15 mm bore including connections, cleaning for refixing or removal to store all as directed. |
| 50 | Supply and fixing galvanised steel water tubing medium grade 15 mm bore including all necessary fittings such as bends, L bows, short piece connections, backnuts, caps plugs, unions couplings, flanges, sockets etc, fixed to wall/floor/ceiling including necessary cutting/chauging in walls made of brick/concrete surface complete all as specified and as directed. |
| 51 | Taking up or down steel tubing 20 mm bore including connections, cleaning for refixing or removal to store all as directed. |
| 52 | Supply and fixing galvanised steel water tubing medium grade 20 mm bore including all necessary fittings such as bends, L bows, short piece connections, backnuts, caps plugs, unions couplings, flanges, sockets etc, fixed to wall/floor/ceiling including necessary cutting/chauging in walls made of brick/concrete surface complete all as specified and as directed. |
| 53 | S&F for 20mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling, laid in floor etc incl all fittings with solvant and brass threaded fittings for fixing taps etc including Taking down unserviceable Steel Water Tubing with Fittings and Connections, etc., including water tightness test complete all as specified and as directed. |
| 54 | S&F for 25mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling, laid in floor etc incl all fittings with solvant and brass threaded fittings for fixing taps etc including Taking down unserviceable Steel Water Tubing with Fittings and Connections, etc., including water tightness test complete all as specified and as directed. |
| 55 | Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified . |
| 56 | Supply and fixing in repairs Vitrious China squatting pan ' Orissa' pattern of size 580 mm x 440 mm white with integral foot rest excluding flushing cistern and flush pipe including P or S trap making good the floor to match with existing floor complete all as specified and as directed. |
| 57 | Supply and Fix in repairs vitreous china wash down water closet Pedastal pattern white (excluding flushing cistren ) including trap set, seat cover and fixing of flushing cistern, brackets, flushing pipe etc, etc. with 'P' or 'S' trap, making good the floor to match with existing floor complete all as specified and as directed. |
| 58 | Supply and fixing in repairs vitreous China wash hand basin, white (flat back or angle back type or counter top) of size 600X480mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc all as specified and as directed. |
| 59 | Supply and fixing in repairs Vitreous China half stall urinal bowl type (back or corner wall type), white , of size 465mm x 355mm x 265mm complete with chromium plated waste fittings including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing arround urinal back in cement, (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and as directed. |
| 60 | Supply and fix in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs, washers and wastes incl bedding in CM on to dwarf walls, or incl fixing cantelever brackets & connecting union to pipe overall size 915 mm x 460 mm bowl size, 410 mm x 330 mm x 160 mm including waste Pipe all as specified and as directed. Make: Blue Star/Nirali/Diamond/ Pheonix. |
| 61 | Supply and fixing in repairs 6 mm thick bevelled edge looking mirror of size 600 x 450 mm mounted on 6 mm thick AC Building board or commercial plywood/hard board backing and fixed to wooden plugs with CP Screws and cup washers all as specified and as directed. |
| 62 | Supply and fixing in repairs Towel rails tubular brass chromium plated 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed. |
| 63 | Supply and fix in repairs Decorative/Fancy type curtain rod of Stainless steel decorative certain rod/pipe 25mm dia with brackets of stainless steel suitable for 25mm dia certain rod/pipe fixed at each end complete all as specified and as directed. |
| 64 | Supply and fix in repairs 15mm dia bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down , screwed for iron pipe or union complete all as specified and directed. |
| 65 | Supply and fix in repairs 15mm dia bib taps standard of PTMT any colour high pressure (Minimum weight 15mm-90gms/20mm- 125gms) screwed down , screwed for iron pipe or union and fixed, complete all as specified and directed. |
| 66 | Supply and fix in repairs Angle valve CP cast copper alloy, with capstan handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed. |
| 67 | Supply and Fixing in repairs stop valves/angle cock, 15mm bore, fancy type, with long shank & cut concealed type chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 68 | Supply and fix in repair Brass CP wall/wash basin mixer 15mm bore for mixing “Hot or cold” water screwed down for iron pipe complete all as specified and as directed. Make: Jaquar / Parryware/Hindware/CERA |
| 69 | Supply and fix in repair fancy type 15mm dia pillar tap, cast copper alloy, chromium plated, with capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe Make: CERA /Parryware/Hindware |
| 70 | Supply and fix in repairs CP 15mm, fancy type Health faucet set with 1 mtr long flexible spring type steel tube & hook including fittings complete all as specified. |
| 71 | Supply and fix in repairs 2 way angle valves/2 in 1 Bip tap, 15mm bore,quarter turn with wall flange, chromium plated, screwed down, high pressure with crutch or butterfly handle and fixed complete all as specified and directed. |
| 72 | Supply and fix in repairs Mirror cabinet of size 330x 430 mm (Prayag catalogue No 551 or equivalent ) complete all as specified and directed. |
| 73 | Supply and fix in repairs Toilet paper holder with flap recessed type stainless steel, complete in all respect as specified. |
| 74 | Supply and fixing for Soap Dish, Single, as Approved, fixing with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish of any description, complete as all specified and directed. |
| 75 | Supply and fix in repairs stainless steel grating 75 mm dia without waste pipe hole complete all as specified and as directed. |
| 76 | Supply and fix in repairs stainless steel grating 110 mm dia without waste pipe hole complete all as specified and as directed. |
| 77 | Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 78 | Taking down unservicable shower rose and supply and fix brass chromium plated shower rose 125mm size with swivel joints including fixing to steel pipe or union complete all as specified and as directed. |
| 79 | S&F PVC (SWR) pipes 75 mm dia. single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 80 | S&F PVC (SWR) pipes 75 mm dia. single socketed, in any length with rubber ring joints, laid in trenches complete all as specified and as directed. |
| 81 | S&F in repair PVC (SWR) pipes 110 mm dia. single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 82 | S&F in repair PVC (SWR) pipes 110 mm dia. single socketed, in any length with rubber ring joints, fixed to wall and roof as in rain water gutters including cutting of PVC pipes in half complete all as specified and as directed. |
| 83 | Supply and fix in repairs PVC (SWR) bends any radius 110 mm bore complete all as specified and directed. |
| 84 | S&F PVC (SWR) junction single 110 mm bore, (single T) equal or unequal with access door complete all as specified and as directed. |
| 85 | S&F PVC (SWR) bend 75 mm dia with access door complete all as specified and as directed. |
| 86 | Supply and fix PVC (SWR) floor trap , plain with grating including jointing with solvent cement 75mm bore complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 87 | Supply and fix PVC (SWR) floor trap , plain with grating including jointing with solvent cement 75mm bore complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender