Tender For Repair Of Flooring, Leakage/ Seepage, Roof Sheet, Periodical Services For Residential And Non Residential Accn Including Cleaning Of Septic Tank, Ovehead Tanks, Sewage Line And Misc Works And Repair To Chain Link Fencing, Security/Compound
Tender Value
30 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
14 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Flooring, Leakage/ Seepage, Roof Sheet, Periodical Services For Residential And Non Residential Accn Including Cleaning Of Septic Tank, Ovehead Tanks, Sewage Line And Misc Works And Repair To Chain Link Fencing, Security/Compound Wall And Drain At Icgs Kamorta Under Age B/R Kamorta. 8863/E8
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 sqm each complete all as specified and as directed. |
| 3 | Taking down shutter of any drescription exc 1 sqm but not exc 2 sqm in each panes and refixing the same opening complete all as specified and directed. |
| 4 | Material and labour for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with shine pinned at joints, fixed to wall and making good to wall all as specified and directed. |
| 5 | Supply and fixing 2nd class hardwood factory made plain framed panelled shutters 30mm thick with lock rail and with panels of 12mm thick commercial veneered particle board veneers on both side or with 9mm thick BWP commercial ply, size of members of shutters as specified in IS 1003-Part-I, kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 6 | Supply and Fix 2nd class HW glazed and skeleton shutters 35mm thk, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 7 | Hacking out old broken glass any thickness, size and quality from wooden frames or stone, concrete of brick surrounds, glazed with putty or beads all as directed. |
| 8 | Supply and fix 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and as directed. |
| 9 | Supply and fix SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples complete all as specified and directed |
| 10 | Supply and Fixing 3mm thick glass, ordinary quality and glazing with oil and putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 11 | Supply and fix in repairs SS wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples complete all as specified and directed |
| 12 | Supply and fixing Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supporting & fixing in opening as per specification & drawing complete all as specified and directed. |
| 13 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plian colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing of SSR Part II. |
| 14 | Supply and fix in 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21complete all as specified and directed. |
| 15 | Supply and Fix 125mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge. |
| 16 | Supply and Fix 150mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge. |
| 17 | Supply and Fix 200mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge. |
| 18 | Supply and fix in repairs extruded aluminium alloy handles, fabricated type, anodised 100mm size complete all as specified and as directed |
| 19 | Supply and fix in repairs extruded aluminium alloy handles, fabricated type, anodised 125mm size complete all as specified and as directed |
| 20 | Supply and fix extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed |
| 21 | Supply and fixing aluminium alloy,anodised, sliding door bolt of length 200mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed. |
| 22 | Supply and fixing aluminium alloy,anodised, sliding door bolt of length 250mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed. |
| 23 | Supply and fix in repairs stainless steel piano type continuous hinges width of flaps 30 mm when open, brass, bright finish or electogalvnized, complete all as specified and directed by Engr-in-Charge. |
| 24 | Material and labour for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 25 | Material and labour for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink primer including preparation of new wooden surface all as directed and as specified. |
| 26 | Providing and fixing factory made UPVC white colour Sliding window (Area not exceeding 2.00 sqm each) Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)Make: Fenesta or equivalent. |
| 27 | Providing and fixing factory made uPVC white colour casement (Openable) window (Area exceeding 1.00 sqm but not exceeding 2.00 sqm each) made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)Make: Fenesta or equivalent. |
| 28 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)Make: Fenesta or equivalent. |
| 29 | Supply and fix powder coated (minimum thickness of powder coating 50 micron), aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 30 | Supply and Fixing 5mm thick frosted/ tinted sheet glass, ordinary quality and glazing with oil and putty in square exc 0.5 sqm in each pane for fixing in UPVC,Aluminium, metal framework in door/ Window /Partitions/ Ventilators with rubber gasket complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 31 | Supply and Fixing 5mm thick frosted/ tinted sheet glass, ordinary quality and glazing with oil and putty in square exc 0.5 sqm in each pane for fixing in UPVC,Aluminium, metal framework in door/ Window /Partitions/ Ventilators with rubber gasket complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender