Tender For Repair And Maintenance Of Internal Electrification And Allied Works In Various Units At Drass Under Ge Kargil
Tender Value
20 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
6 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Internal Electrification And Allied Works In Various Units At Drass Under Ge Kargil
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc complete as specified and directed by the Engg-in-Charge |
| 2 | M&L for Point wiring for light/fan/bell with FRLS cable of 1.5 Sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2 mm thick PVC casing caping with all accessories and 1.5 Sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate, flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch complete as specified and directed by the Engg-in-Charge |
| 3 | All as per Srl item No 2.00 here in before but for one 3 pin 5 Amps switch socket on same board complete as specified and directed by the Engg-in-Charge |
| 4 | All as per Srl item No 2.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board complete as specified and directed by the Engg-in-Charge |
| 5 | All as per Srl item No 2.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board complete as specified and directed by the Engg-in-Charge |
| 6 | M&L for Point wiring for light/fan/bell with FRLS cable of 1.5 Sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including PVC conduit min 20mm dia medium grade with all accessories and 1.5 Sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate, flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch complete as specified and directed by the Engg-in-Charge |
| 7 | All as per Srl item No 6.00 here in before but for one 3 pin 5 Amps switch socket on same board complete as specified and directed by the Engg-in-Charge |
| 8 | All as per Srl item No 6.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board complete as specified and directed by the Engg-in-Charge |
| 9 | All as per Srl item No 6.00 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board complete as specified and directed by the Engg-in-Charge |
| 10 | S&F in replacement switch piano flush type 5 Amps, single pole one way complete as specified and directed by the Engg-in-Charge |
| 11 | S&F in replacement socket outlet 2 in 1, 6 Amp flush type complete as specified and directed by the Engg-in-Charge |
| 12 | S&F in replacement switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type complete as specified and directed by the Engg-in-Charge |
| 13 | S&F in replacement switch socket combination 2 in 1, 5 and 15 Amps flush type complete as specified and directed by the Engg-in-Charge |
| 14 | S&F in replacement bell push, flush type, 5 Amp complete as specified and directed by the Engg-in-Charge |
| 15 | S&F in replacement ceiling rose surface bakelite 65x50mm, two to three terminals complete as specified and directed by the Engg-in-Charge |
| 16 | S&F in replacement lamp holder, insulated body with back plate suitable for batten fittings complete as specified and directed by the Engg-in-Charge |
| 17 | S&F in replacement electronic Ding Dong Bell, AC 240 volts single pole, complete all as specified and directed by the Engg-in-Charge |
| 18 | S&F in replacement modular switch 1 way 6A, 1 module complete as specified and directed by the Engg-in-Charge |
| 19 | S&F in replacement modular socket 6A-2/3 pin combined 2 module complete as specified and directed by the Engg-in-Charge |
| 20 | S&F in replacement modular switch 1 way 16A, 1 module complete as specified and directed by the Engg-in-Charge |
| 21 | S&F in replacement modular socket 6A/16 A -2/3 pin combined 2 module complete as specified and directed by the Engg-in-Charge |
| 22 | S&F in replacement modular bell Push 6A 1 Module complete as specified and directed by the Engg-in-Charge. Note for Item No-18 to 22:- Cost of items required for fixing modular switch,sockets shall be included in over all cost quoted as specified and directed by the Engg-in-Charge |
| 23 | S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 12 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed by the Engg-in-Charge |
| 24 | S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed by the Engg-in-Charge |
| 25 | S&F in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 4 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed by the Engg-in-Charge |
| 26 | S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning complete as specified and directed by the Engg-in-Charge |
| 27 | S&F in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning complete as specified and directed by the Engg-in-Charge |
| 28 | M&L for submain wiring comprising single core, 2 Runs of 4.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including min 25mm dia. PVC conduit/ PVC Casing Caping ISI Marked(heavy duty) and its fittings on surface/recessed complete including provision of 1X4.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS complete all as specified and directed by Engr-in-Charge.(Note :- Extra length of cables/ wire required for connection to MCBs shall not be paid separately and the rate quoted by contractor for per unit shall be deemed accordingly) |
| 29 | M&L for submain wiring comprising single core, 2 Runs of 6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including min 25mm dia. PVC conduit/ PVC Casing Caping ISI Marked(heavy duty) and its fittings on surface/recessed complete including provision of 1X6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS complete all as specified and directed by Engr-in-Charge.(Note :- Extra length of cables/ wire required for connection to MCBs shall not be paid separately and the rate quoted by contractor for per unit shall be deemed accordingly) |
| 30 | S&F in replacement 1100 volts grade heavy duty 6 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, complete all as specified and directed by the Engg-in-Charge |
| 31 | S&F in replacement 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, complete all as specified and directed by the Engg-in-Charge |
| 32 | S&F in replacement 1100 volts grade heavy duty 16 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, complete all as specified and directed by the Engg-in-Charge |
| 33 | S&F in replacement LED bulb 9 watt, 230 volts. (As per site requirement) complete as specified and directed by the Engg-in-Charge |
| 34 | S&F in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete as specified and directed by the Engg-in-Charge |
| 35 | S&F in replacement LED 1x18 Watt, 220 V, Cool Daylight/ Warm White (As per site requirement) (6000-7000K) , AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specifed and directed. Make- Havells/Crompton/Polycab or equivalent in approved makes. |
| 36 | S&F in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specifed and directed. Make- Havells/Crompton/Polycab or equivalent in approved makes. |
| 37 | S&F in replacement LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size complete as specified and directed by the Engg-in-Charge. |
| 38 | S&F in replacement LED Bed side Lamp 3W, 230 V complete all as specified and directed by the Engg-in-Charge |
| 39 | S&F in replacement exhaust fan, steel body, AC single phase, 230 V of size 300 mm sweep with blades and frame and louvers complete as specified and directed by the Engg-in-Charge. |
| 40 | S&F in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete as specified and directed by the Engg-in-Charge. |
| 41 | S&F in replacement LED luminarie 600x600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete 6000K/3000K with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed by the Engg-in-Charge |
| 42 | S&F in replacement PVC casing caping size 32x12 mm medium grade ISI mark including accessories to fix on wall complete all as specified and directed by the Engg-in-Charge |
| 43 | S&F in replacement PVC conduit size 20mm medium grade ISI mark including suitable size of PVC saddle complete all as specified and directed by the Engg-in-Charge |
| 44 | S&F in replacement PVC conduit size 25 mm medium grade ISI mark including suitable size of PVC saddle complete all as specified and directed by the Engg-in-Charge. |
| 45 | S&F in replacement LED bulb 12 watt,Thread type (E27) 3 star, colour temp 6500K, 230 volts complete as specified and directed by the Engg-in-Charge. |
| 46 | S&F in replacement LED bulb 12 watt,Thread type (E27) 3 star, colour temp 3000K, 230 volts complete as specified and directed by the Engg-in-Charge. |
| 47 | S&F in replacement load line distribution board double door type, TPN, vertical, 4 way, 415 V complete with incomming frame three pole , including bus bar, neutral link, blanking plates etc complete as specified and directed by the Engg-in-Charge. |
| 48 | S&F in replacement 240 V miniature circuit breaker (MCB) changeover switch 63 Amp in the MCB DB complete with connection testing and commissioning complete as specified and directed by the Engg-in-Charge. |
| 49 | Note : Deduction for amount of Rs. 42,410.00 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender