Tender For Special Repairs To Bldg No. P-743 Of 469 Asc (Sup) Type ‘A, Special Repairs To Roofs Of Bldg No. P-110 (Signal Centre) Of Adsr, Bldg Nos. P-575, P-576 & P-698 Of Stn Hq Alwar And Bldg No. T-6 (Bso Yard) Of Ge Alwar And Provn Of 02 X Trg Sh
Tender Value
39 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
19 days left
EMD
79000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No. P-743 Of 469 Asc (Sup) Type ‘A, Special Repairs To Roofs Of Bldg No. P-110 (Signal Centre) Of Adsr, Bldg Nos. P-575, P-576 & P-698 Of Stn Hq Alwar And Bldg No. T-6 (Bso Yard) Of Ge Alwar And Provn Of 02 X Trg Sheds At Trg Area Of Grenadiers At Itarana Mil Stn Alwar.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil, complete all as specified and directed. |
| 2 | Returning, filling in excavated earth, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed. |
| 3 | Removing surplus excavated soil to a distance exceeding 50 metre but not exceeding 100 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point, complete all as specified and directed. |
| 4 | M&L for cement concrete 75 mm thick, Type D-2, nominal mix 1:4:8 using 40 mm graded stone aggregate, as in sub-base, laid, compacted and finished to required line and level, complete all as specified and directed. |
| 5 | S&F machine-pressed precast cement concrete interlocking paver blocks of any shape and size, 60 mm thick, M-35 grade, manufactured with grey cement without pigment and conforming to IS 15658, laid to line, level and required pattern over prepared sand cushioning, including cutting of blocks wherever required, complete all as specified and directed. Note: Sand cushioning shall be measured and paid for separately. |
| 6 | Supply and laying sand, including spreading, levelling, watering where required and ramming in layers not exceeding 25 cm thick, complete all as specified and directed. |
| 7 | M&L for cement concrete Type D-2, nominal mix 1:4:8 using 40 mm graded stone aggregate, as in foundations and mass concrete, complete all as specified and directed. |
| 8 | M&L for hard core of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true and even surface, complete all as specified and directed. |
| 9 | M&L for cement concrete 75 mm thick, Type C-1, nominal mix 1:3:6 using 20 mm graded stone aggregate, as in plinth protection, finished fair and even to required line, level and slope, complete all as specified and directed. |
| 10 | M&L for cement concrete Type B-1, nominal mix 1:2:4 using 20 mm graded stone aggregate, as in copings, including fair finishing to exposed surfaces, complete all as specified and directed. |
| 11 | M&L for brickwork with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 12 | M&L for 15 mm thick rendering in cement mortar 1:4, mixed with approved integral liquid waterproofing compound in manufacturer's recommended proportion, finished even and smooth, complete all as specified and directed. NOTE- WPC shall be measured and paid separately. |
| 13 | Supply only integral waterproofing compound of approved quality suitable for mixing with cement mortar/concrete, complete all as specified and directed. |
| 14 | M&L for preparation of new plastered wall surfaces and applying two coats of cement-based paint over a coat of suitable primer, including walls, cornices, pilasters and similar surfaces, complete all as specified and directed. |
| 15 | S&F steelwork in tubular sections as in purlins, rafters and similar structural members, using induction butt-welded steel tubes conforming to IS 1161, Grade ST-240, including cutting, welding, drilling, fabrication, erection and special-shaped washers and necessary fixing accessories, complete all as specified and directed. |
| 16 | M&L for pre-painted Galvalume/aluminium-zinc alloy coated corrugated steel sheets, 0.50 mm thick, green colour, having tensile strength 550 MPa, as in roof covering/cladding to walls, fixed with suitable self-drilling/self-tapping screws with sealing washers and necessary accessories, complete all as specified and directed. |
| 17 | M&L for pre-painted Galvalume/aluminium-zinc alloy coated plain steel sheets, 0.50 mm thick, green colour, having tensile strength 550 MPa, as in roof covering, wall cladding and eaves boards, fixed with suitable self-drilling/self-tapping screws with sealing washers and necessary accessories, complete all as specified and directed. |
| 18 | M&L for Preparation of new steel surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 19 | Demolition of reinforced cement concrete in roofs, floors other than ground floors, beams, staircases, landings, chajjas and similar suspended work, including removal of demolished material, complete all as specified and directed. |
| 20 | M&L for reinforced cement concrete, nominal mix Type B-1, 1:2:4 using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like, complete all as specified and directed. |
| 21 | M&L for TMT steel reinforcement bars 10 mm dia and over, cut to required lengths and bent to required shapes, including straightening, cranking, bending, hooking ends, bending spirally for hooping to columns and binding with annealed mild steel wire not less than 0.90 mm dia or securing with approved clips, complete all as specified and directed. |
| 22 | Demolition of brick or stone masonry built in cement/lime mortar of any mix, including quoins, pillars and ashlar masonry and removal of demolished material, complete all as specified and directed. |
| 23 | Demolition of cement concrete, unreinforced, in ground floors and paving not exceeding 15 cm thick, whether below or above ground level, including removal of rubbish and demolished material, complete all as specified and directed. |
| 24 | Taking down chowkhats or frames with shutters, without taking off shutters from frames, exceeding 1.50 Sqm but not exceeding 4.00 Sqm each, and removing to store, complete all as specified and directed. |
| 25 | Taking down chowkhats or frames with shutters, without taking off shutters from frames, not exceeding 1.50 Sqm each, and removing to store, complete all as specified and directed. |
| 26 | Dismantling floor, hearth or wall tiling, including cement mortar bedding but excluding backing, carefully removing serviceable tiles to store and removing rubbish off the premises, complete all as specified and directed. |
| 27 | Taking down cement plaster of any description from brick or stone surfaces, including removal of debris, complete all as specified and directed. |
| 28 | Taking up or down 15 mm bore steel tubing together with connections and fittings, complete all as specified and directed. |
| 29 | Taking up or down 20 mm bore steel tubing together with connections and fittings, complete all as specified and directed. |
| 30 | Dismantling/demolishing existing water tank of capacity exceeding 250 litres but not exceeding 500 litres and removing the same from site, complete all as specified and directed. |
| 31 | Dismantling 110 mm bore PVC (SWR) drain pipe together with fittings and accessories, including carefully taking out from walls, floors or trenches as required and removing/depositing the dismantled material as directed, complete all as specified and directed. |
| 32 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, including taking apart connections and removing dismantled material as directed, complete all as specified and directed. |
| 33 | Dismantling 75 mm bore PVC (SWR) drain pipe together with fittings and accessories, including carefully taking out from walls, floors or trenches as required and removing/depositing dismantled material as directed, complete all as specified and directed. |
| 34 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons and similar locations, including mortar bedding and pointing, and removing/depositing dismantled material as directed, complete all as specified and directed. |
| 35 | M&L for granite slab 18 to 20 mm thick, of approved colour and shade, as in cooking platforms, window sills and the like, machine cut, bedded and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of granite, including cutting and polishing exposed edges and nosing where required, bedded over 20 mm thick cement mortar 1:6, complete all as specified and directed. |
| 36 | M&L for half-brick thick wall with fly ash bricks conforming to IS 13757, old size, straight or curved on plan to any radius, built in cement mortar 1:4, complete all as specified and directed. |
| 37 | M&L for solid PVC door frame of section 50 x 47 mm, fabricated from 5 mm thick plain coloured PVC sheet and reinforced with MS square tube, including supplying and fixing in openings with necessary fixing accessories, complete all as specified and directed. |
| 38 | S&F factory-made solid PVC moulded door shutter, 28 to 30 mm thick, stile and rail construction with 2, 4 or 6 raised-panel design, having 2 mm thick moulded pre-laminated PVC sheet on front face and 2 mm thick plain coloured PVC sheet on back face, including fixing in existing/new frame with necessary accessories, complete all as specified and directed. |
| 39 | S&F 35 mm thick second-class hardwood factory-made panelled door shutter, two-panel type, with lock rail and 9 mm thick BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces, timber kiln seasoned and chemically pressure treated, including fixing to chowkhats, complete all as specified and directed. |
| 40 | S&F 35 mm thick second-class hardwood glazed and skeleton shutter, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded and fitted with cut and mitred beads for securing glass, complete all as specified and directed. |
| 41 | S&F galvanised mild steel wire cloth having 0.56 mm nominal dia wire and average aperture width 1.18 mm, fixed with tinned tacks/GI wire staples or nails and screws, complete all as specified and directed. |
| 42 | S&F ordinary quality sheet glass, 3 mm thick, in panes not exceeding 0.50 Sqm each, including cutting and fixing, complete all as specified and directed. |
| 43 | M&L for preparation of new wooden surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 44 | S&F stainless steel butt hinges, 100 mm long, medium weight, including necessary stainless steel screws, complete all as specified and directed. |
| 45 | S&F stainless steel ‘D’ type handles, 150 mm long, including necessary fixing screws, complete all as specified and directed. |
| 46 | S&F stainless steel barrel tower bolts, 150 mm long, of extruded section, including necessary fixing screws, complete all as specified and directed. |
| 47 | S&F stainless steel sliding door bolt, 300 mm long, complete with hasp, staple of bolt type and fixing clips of sheet, cast or extruded sections, including fixing bolts/screws, complete all as specified and directed. |
| 48 | S&F floor door stopper, 150 mm long, of stainless steel alloy body and tongue with hard-drawn steel spring, fixed in floor with necessary fixing accessories, complete all as specified and directed. |
| 49 | M&L for framed steelwork as in doors or gates, fabricated from angle or other sections with gusset plates, rails, braces etc., including drilling for fixing steel sheeting or other covering, doors etc., preparation for hanging or sliding with hooks, hinges or steel hanging door fittings, cooler stands excluding steel sheeting/other covering, running rails and guides, hanging, fastening and fixing complete, including making good the floor in PCC 1:2:4 Type B-0 to match existing floor, complete all as specified and directed. |
| 50 | M&L for flat iron as in holdfasts, hooks and cleats welded to angle iron door/window frames etc., including cutting, bending, welding and fixing, complete all as specified and directed. |
| 51 | S&F anodized aluminium frames and other sections for doors, windows, ventilators and partitions, powder coated in approved colour with coating thickness not less than 50 micron, including one or more rebates, joining cleats and necessary fixing accessories, complete all as specified and directed. |
| 52 | S&F anodized aluminium window and ventilator shutters, side-hung type without sash bars, fabricated from aluminium sections weighing 0.55 kg/m, powder coated in approved colour with coating thickness not less than 50 micron, including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws and anodized aluminium fittings comprising peg stay 150 mm long, hinges Type B-21 100 mm long and suitable handle, complete all as specified and directed. |
| 53 | Cutting holes in brick/stone walls not exceeding half-brick thickness, built in cement mortar, for inserting holdfasts and making good disturbed portions in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed. |
| 54 | S&F mild steel cupboard shutter with frame, Godrej pattern, fabricated from 22 gauge mild steel sheet, including chromium-plated MS handle with proper locking arrangement comprising brass mortice lock, vertical type, size 65 mm, 4 lever, with escutcheon plates and two keys, including preparation and applying two coats of spray-painted synthetic enamel paint over suitable primer, complete all as specified and directed. |
| 55 | S&F in repairs stainless steel rod 20 mm inner dia of required length, including decorative finials at both ends and pair of stainless steel brackets fixed at both ends with rawl plugs and steel screws to walls/beams, complete all as specified and directed. |
| 56 | M&L for cement concrete Type B-0, nominal mix 1:2:4 using 12.5 mm graded stone aggregate, 25 mm thick, as in floors, laid, compacted and finished to required line and level, complete all as specified and directed. |
| 57 | M&L for light-shade, joint-free, non-skid ceramic tiles, 7 to 8 mm thick, square/rectangular, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15 mm thick screed bed of cement mortar 1:6, complete all as specified and directed. |
| 58 | M&L for light-shade vitrified ceramic tiles, 10 mm thick, square/rectangular, polished, area of each tile not exceeding 0.36 Sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 59 | M&L for light-shade vitrified ceramic tiles, 10 mm thick, square/rectangular, polished, area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick cement rendering in cement mortar 1:4, complete all as specified and directed. |
| 60 | M&L for cement concrete 75 mm thick, Type C-2, nominal mix 1:3:6 using 40 mm graded stone aggregate, as in plinth protection, laid to required line, level and slope and finished fair and even, complete all as specified and directed. |
| 61 | M&L for glazed ceramic coloured tiles, 450 x 350 x 7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 62 | M&L for 10 mm thick rendering in cement mortar 1:6 on brickwork or concrete surfaces, including fair faces of brickwork, finished even and smooth without using extra cement, complete all as specified and directed. |
| 63 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces including ceilings, finished even and smooth without using extra cement, complete all as specified and directed. |
| 64 | M&L for preparation of new surfaces and applying two coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance conforming to IS 15489, with alkali and fungal resistance and dirt resistance, of approved shade, with silicon additives, including one priming coat of exterior primer, complete all as specified and directed. |
| 65 | M&L for providing and applying minimum 1 mm thick wall-care putty over prepared surfaces to obtain an even and smooth surface suitable for painting, complete all as specified and directed. |
| 66 | M&L for complete removal of existing treatment from stone/plastered wall surfaces and applying two coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance conforming to IS 15489, with alkali, fungal and dirt resistance, of approved shade, including necessary surface preparation and priming, complete all as specified and directed. |
| 67 | M&L for preparation of newly plastered wall surfaces and applying two coats of oil-bound distemper of approved shade over 2 mm thick wall putty, complete all as specified and directed. |
| 68 | M&L for complete removal of existing treatment from old decorated wall surfaces, including cleaning mortar drops, smoke soot, moulds, moss, efflorescence, salt, trading/oily spots etc., and applying two coats of oil-bound distemper of approved shade/tint, including 1 mm thick wall-care putty, complete all as specified and directed. |
| 69 | M&L for brooming down old decorated surfaces of walls, plastered or unplastered, including cornices, pilasters etc., and applying one coat of whitewash, complete all as specified and directed. |
| 70 | All as per preceding item but on ceiling surfaces, complete all as specified and directed. |
| 71 | M&L for preparation of new plastered wall surfaces and applying three coats of whitewash, complete all as specified and directed. |
| 72 | M&L for preparation of newly plastered/unplastered ceiling surfaces and applying three coats of whitewash, complete all as specified and directed. |
| 73 | S&F medium grade steel/GI tubing, 15 mm bore, complete with fittings and connections, fixed to walls and/or laid in floors, complete all as specified and directed. |
| 74 | S&F medium grade GI tubing, 20 mm bore, complete with fittings and connections, fixed to walls and/or laid in floors, complete all as specified and directed. |
| 75 | S&F in repairs PVC connection pipe, 15 mm dia and 600 mm long, complete with adapters and washers at both ends, including necessary connections, complete all as specified and directed. |
| 76 | S&F rotational moulded polyethylene water storage tank, 500 litres capacity, cylindrical vertical type with closed top, including hoisting, positioning and fixing complete, all as specified in MES SSR Part-I and as directed. |
| 77 | S&F high-pressure brass ball valve with polyethylene float and fly net complete, screwed for 15 mm bore iron pipe, including fixing and adjustment, complete all as specified and directed. |
| 78 | S&F in repairs fancy type bib tap of chromium-plated alloy with crutch or butterfly handle, screwed down high-pressure type, screwed for iron pipe or brass ferrule, 15 mm bore, including necessary connections and fixing, complete all as specified and directed. |
| 79 | S&F in repairs white vitreous china wash-hand basin, flat-back type, size 450 x 300 mm, fixed on and including new brackets, complete with CP waste coupling and necessary fixing accessories, complete all as specified and directed. |
| 80 | S&F in repairs concealed stop valve/angle valve, fancy type, chromium-plated alloy, screwed down high-pressure type, screwed at both ends for iron pipe or for unions, 15 mm dia, including necessary connections, complete all as specified and directed. |
| 81 | S&F gunmetal globe or gate valve, 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete, all as specified and directed. |
| 82 | S&F PVC waste pipe, 32 mm bore, of suitable length for wash-hand basin/urinal/sink, including necessary connections and fixing, complete all as specified and directed. |
| 83 | S&F soap dish of approved type, fixed to plugs with chromium-plated brass screws, complete all as specified and directed. |
| 84 | S&F sheet-glass shelf assembly comprising 5.5 mm thick sheet-glass shelf, 12 cm wide, with chromium-plated brackets, guard and railing 60 cm long, including necessary fixing accessories, complete all as specified and directed. |
| 85 | S&F in repairs stainless steel sink, 1 mm thick, kitchen/laboratory type, overall size 485 x 420 mm and bowl size 418 x 333 mm, including plugs, washers and wastes, bedding in cement mortar on dwarf wall or fixing on cantilever brackets and connecting union to pipe, complete all as specified and directed. |
| 86 | S&F in repairs 600 x 450 mm bevelled-edge mirror of selected-quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium-plated brass screws and cup washers, complete all as specified and directed. |
| 87 | S&F in repairs vitreous china squatting pan, Orissa pattern, size 580 x 440 mm, white, with integral footrests and ‘P’ or ‘S’ trap, including cement concrete bedding, connection to trap and flushing pipe and making good disturbed floor surfaces to match existing, complete all as specified and directed. |
| 88 | S&F in repairs PVC low-level flushing cistern, 10 litres capacity, white, ISI marked, complete with inlet ball valve, float and handle, siphonic-action mechanism, brackets and flush pipe of low/high density polyethylene or PVC, including necessary connections and fixing, complete all as specified and directed. |
| 89 | S&F in repairs CP pillar tap, fancy type, cast copper alloy, chromium plated, with capstan head, screwed-down high-pressure type, with or without lettering ‘HOT’ or ‘COLD’, with long screwed shank, fly nuts and washers, 15 mm bore, including fixing and connections, complete all as specified and directed. |
| 90 | S&F in repairs brass chromium-plated shower rose, 125 mm size, swivel-joint type, including fixing to 15 mm bore steel pipe or union, complete all as specified and directed. |
| 91 | S&F in repairs tubular towel rail, 20 mm dia, ‘D’ type, 60 cm long between flanges, of brass chromium plated, including brackets/flanges and necessary fixing accessories, complete all as specified and directed. |
| 92 | S&F PVC (SWR) pipe, 110 mm bore, single socketed, in any length, with rubber-ring joints, fixed to walls/floors, including necessary fixing accessories, complete all as specified and directed. |
| 93 | S&F PVC (SWR) bends of any radius, 110 mm bore, including rubber-ring joint and necessary connections, complete all as specified and directed. |
| 94 | S&F PVC (SWR) vent cowl, 110 mm bore, including necessary connections and fixing, complete all as specified and directed. |
| 95 | S&F PVC (SWR) single junction (single ‘T’), equal or unequal, 110 mm bore, including necessary connections, complete all as specified and directed. |
| 96 | S&F PVC (SWR) pipe, 75 mm bore, single socketed, in any length, with rubber-ring joints, laid in trenches or fixed to floors/walls, including necessary fixing accessories, complete all as specified and directed. |
| 97 | S&F PVC (SWR) bends of any radius, 75 mm bore, including necessary connections, complete all as specified and directed. |
| 98 | S&F PVC (SWR) single junction (single ‘T’), equal or unequal, 75 mm bore, including necessary connections, complete all as specified and directed. |
| 99 | S&F in repairs chromium-plated grating dome, 100 mm dia, minimum weight 25 grams, fixed with cement, complete all as specified and directed. |
| 100 | S&F 75 mm bore PVC (SWR) plain floor trap with grating, including jointing with solvent cement and making necessary connections, complete all as specified and directed. |
| 101 | S&F PVC (SWR) gully trap, 125/110 mm, including setting, fixing and jointing with solvent cement and making necessary connections, complete all as specified and directed. |
| 102 | Demolition of mud treatment in roofs of any thickness, including plastering and existing treatment, whether full thickness or part thereof is removed, cleaning and preparing exposed surface for further treatment and taking out and disposing of debris and rubbish to a distance exceeding 1 Km but not exceeding 1.5 Km, complete all as specified and directed. |
| 103 | M&L for cement concrete Type B-0, nominal mix 1:2:4 using 12.5 mm graded crushed stone aggregate, as in roof padding, laid to a minimum consolidated thickness of 25 mm as levelling course and laid, compacted and finished to minimum slope 1:30, complete all as specified and directed. |
| 104 | M&L for 15 mm thick screed in cement mortar 1:4 over green concrete surface, mixed with waterproofing compound, finished even and smooth without using extra lime or cement, complete all as specified and directed. Note: Waterproofing compound shall be measured and paid for separately. |
| 105 | M&L for applying evenly tack coat of industrial bitumen Grade 85/25 at the rate of 1.20 Kg/Sqm over bituminous primer, including cleaning and preparation of surfaces, complete all as specified and directed. |
| 106 | M&L for APP-based polymeric waterproofing membrane, minimum weight 3 Kg/Sqm and minimum 3 mm thick, reinforced with polyester non-woven reinforcement/mat as centre core, laid by torch application method on prepared and primed surface with minimum 100 mm overlaps at longitudinal and transverse joints or as recommended by manufacturer, including two coats of reflective silver aluminium paint over APP membrane, complete all as specified and directed. |
| 107 | M&L for plain cement concrete Type C-1, nominal mix 1:3:6 using 20 mm graded stone aggregate, as in precast kerb blocks, set in cement mortar 1:4, with plain fair faces including necessary chamfers, weathering and throating, complete all as specified and directed. |
| 108 | M&L for preparation of new untreated concrete/plastered surfaces of kerb stones exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint in alternate black and white colour over one coat of suitable primer, complete all as specified and directed. |
| 109 | M&L for framed steelwork as in grills, gratings and similar work, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, cooler stands, framed balusters, walkways, railings, framework of water tanks and similar work, conforming to Grade E-165 (Fe-290), including fabrication and fixing, complete all as specified and directed. |
| 110 | M&L for rough-cast plaster on exterior wall surfaces comprising undercoat of cement mortar 1:3 not less than 10 mm thick and, while still in plastic state, applying rough-cast mixture comprising crushed stone/fine gravel aggregate of size 6 to 12 mm, coarse sand and cement in the proportion 1:1:1, finished evenly with aggregate thoroughly embedded and covered, complete all as specified and directed. |
| 111 | Excavating post holes or similar excavations, each not exceeding 0.50 Cum, in soft/loose soil, including getting out, returning, filling in and ramming earth or broken rubble mixed with earth around posts in layers not exceeding 25 cm thick, complete all as specified and directed. |
| 112 | M&L for cement concrete Type C-2, nominal mix 1:3:6 using 40 mm graded stone aggregate, as in foundations, filling and mass concrete for fixing fencing posts, including necessary formwork where required, complete all as specified and directed. |
| 113 | S&F fencing posts/handrails of half-round or other stock sections, including embedding in concrete and screwing as required; wind ties for roofs; securing bolts; posts and struts in fencing including cutting tops to shape, drilling holes and notching for wires; flat iron fillets for securing wire mesh including necessary drilling, bolting or riveting and similar work, conforming to Grade E-165 (Fe-290), complete all as specified and directed. |
| 114 | S&F mild steel machine-made screw bolts with hexagonal or square head at one end and screwed at the other, complete with washer and one hexagonal or square nut, exceeding 5 cm but not exceeding 10 cm long, with shank 5 to 10 mm dia, complete all as specified and directed. |
| 115 | Supply only chain-link mild steel galvanised fencing of required mesh, size and type, complete all as specified and approved. |
| 116 | Fixing only chain-link fencing of any mesh, size and type to standards, posts or rails, including line wires, straining bolts, binding wire and all necessary fixing accessories, complete all as specified and directed. |
| 117 | M&L for mild steel round bars 10 mm dia and over, conforming to Grade E-165 (Fe-290), as in handles of manhole covers and similar work, including necessary cutting, bending and fixing in position, complete all as specified and directed. |
| 118 | M&L for treating ends of posts, backs of chowkhats and similar surfaces, individual area tarred exceeding 0.10 Sqm but not exceeding 0.50 Sqm each, complete all as specified and directed. |
| 119 | M&L for preparation of steel surfaces and applying two coat of synthetic enamel paint over a cact of red oxide primer for surfaces not exceeding 10 cm in width or girth, complete all as specified and directed. |
| 120 | Dismantling posts or struts of wood, steel or RCC of any section, including taking out embedded portions from natural ground and making good disturbed ground, complete all as specified and directed. |
| 121 | Dismantling asbestos cement corrugated or semi-corrugated sheets from roof covering, including necessary fixing accessories and removing/depositing dismantled material as directed, complete all as specified and directed. |
| 122 | Dismantling wall and ceiling boards of fibre, pulp, insulation or similar material, or insulation boards, slabs or blankets of any thickness, including cover fillets and removing/depositing dismantled material as directed, complete all as specified and directed. |
| 123 | M&L for random rubble uncoursed stone masonry walling, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified and directed. |
| 124 | M&L for preparation of old treated wall surfaces, plastered or unplastered, and applying one coat of cement-based paint of approved shade/tint, complete all as specified and directed. |
| 125 | M&L for brooming down old decorated wall surfaces, plastered or unplastered, including cornices, pilasters and similar surfaces, and applying one coat of oil-bound distemper of approved shade/tint, complete all as specified and directed. |
| 126 | M&L for mild steel plate, plain or chequered, channels, square cut or notched, including ordinary or countersunk holes, without attachments, including cutting, drilling and fixing as required, complete all as specified and directed. |
| 127 | Taking down carefully existing copper/aluminium point wiring for light, socket or power points, complete, fittings such as switches, ceiling roses, pendants, regulators, sockets etc. being measured separately, including making good disturbed surfaces of walls/floors etc. to match existing surfaces, complete all as specified and directed. |
| 128 | Taking down existing MCB with sheet metal enclosure, main switch, DB etc., including disconnecting electrical connections and making good disturbed surfaces to match existing surfaces, complete all as specified and directed. |
| 129 | Taking down existing sub-main wiring of any size/capacity, including necessary disconnection and making good disturbed surfaces to match existing surfaces, complete all as specified and directed. |
| 130 | Taking down carefully by unscrewing from boards/outlet boxes existing electrical fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, building security lights with brackets, ceiling fittings 2 x 2 LED, bulkhead fittings, tube-light fittings of any type, bedside lights, modular switch sockets, modular sheet-metal flush boxes, fan regulators of any type etc., complete all as specified and directed. |
| 131 | M&L for concealed light point wiring with two single-core PVC insulated, unsheathed, multistranded copper conductor cables of size 1.5 Sqmm (FRLS), drawn in and including 20 mm dia electrical-grade PVC conduit concealed in wall/ceiling/floor, including PVC insulated unsheathed multistranded copper earth continuity conductor of size 1.5 Sqmm (FRLS), MS sheet-metal box with modular sheet top cover of required module and frame for mounting switch, including cutting chases and making good disturbed surfaces including plastering and painting to match existing surfaces, for one light point controlled by one one-way switch, complete all as specified and directed. |
| 132 | All as per preceding item but for one ceiling/exhaust fan point controlled by one switch and regulator, complete all as specified and directed. |
| 133 | All as per preceding item but for one 3-pin 5/6 Amp switched socket outlet on the same board with other switches, complete all as specified and directed. |
| 134 | All as per preceding item but for one 3-pin 5/6 Amp switched socket outlet point on independent board, complete all as specified and directed. |
| 135 | All as per preceding item but for one bell/buzzer point controlled by one bell push, complete all as specified and directed. |
| 136 | All as per preceding item but concealed point wiring with 2.5 Sqmm multistranded copper conductor cable and 2.5 Sqmm earth continuity conductor for 15/16 Amp power point, complete all as specified and directed. |
| 137 | S&F modular one-way switch, 6 Amp, 1 module, 230/250 Volts grade, fixed on modular top cover catered for in point wiring, including necessary connections, complete all as specified and directed. |
| 138 | All as per preceding item but modular one-way switch, 16 Amp, 1 module, complete all as specified and directed. |
| 139 | All as per preceding item but modular bell push, 6 Amp, 1 module, complete all as specified and directed. |
| 140 | S&F multipurpose modular socket outlet, 2-in-1, 3-pin, 5/6 Amp, 2 module, flush-mounting type, 230/250 Volts grade, fixed on modular top cover catered for in point wiring, including necessary connections, complete all as specified and directed. |
| 141 | All as per preceding item but multipurpose modular socket outlet, 2-in-1, 3-pin, 15/16 Amp, flush-mounting type, complete all as specified and directed. |
| 142 | S&F in replacement LED batten fitting, 1.20 metre long, comprising CRCA sheet housing with PC glossy diffuser, duly pre-wired, nominal system lumen output 2200 lumens minimum, system efficacy 120 lumens/Watt minimum and total power consumption not exceeding 20 Watt, complete with inbuilt driver, rated system life 40,000 burning hours at L70, colour temperature 6500K, CRI >80, THD <10 and PF >0.95, complete all as specified and directed. Make/Cat Part: Crompton CRI >305-40-57-SL-DP-NWH / Philips BN308C LED20S-6500 L120 PSU WH / Havells STOUTPLUS600BS20WLED840SPCWH or approved equivalent as specified. |
| 143 | S&F in repair insulated-body lamp holder with back plate suitable for angle/batten fitting, complete with 9 Watt LED lamp and necessary electrical connections, complete all as specified and directed. |
| 144 | S&F in replacement 20 Watt emergency LED inverter bulb, B-22 cap, with inbuilt lithium battery having minimum 4 hours backup, fast charging and minimum two-year warranty, complete all as specified and directed. Make: Havells/Philips/Bajaj. |
| 145 | S&F in replacement LED bulkhead fitting, 1 x 10 Watt, comprising standard LED fitting with extruded polycarbonate housing, including electrical connection with 2-core flexible copper conductor cable 23/0.0076 from ceiling rose to fitting, complete with accessories; system efficacy minimum 100 lumen/Watt, input voltage 140–270 Volts, operating temperature minus 5°C to plus 50°C, PF minimum 0.95, THD <15%, IP65, CCT minimum 5400K, white polycarbonate housing, inbuilt LED driver of same make with open/short-circuit and over-voltage protection, surge protection minimum 2.5 kV, CRI minimum 80 and rated life 50,000 burning hours at L70, complete all as specified and directed. |
| 146 | S&F in repairs indoor decorative ultra-slim surface/wall-mounted T5 LED batten tube-light fitting, 1 x 9 Watt, size within 600 x 25 x 40 mm, suitable for mirror light, with polycarbonate channel housing and integrated electronic driver, operating voltage 140–270 Volts, colour temperature 6500K and efficacy >100 lumen/Watt, including internally pre-wired connections and twin-core twisted flexible copper conductor cable of suitable size, complete all as specified and directed. Make: Havells/Philips/Bajaj. |
| 147 | S&F in repair surface-type Bakelite ceiling rose, 5 Amp, with two to three terminals/plate, including necessary connections, complete all as specified and directed. |
| 148 | S&F sheet-metal enclosure distribution board, single pole and neutral, 240 Volts, 8-way, with 200 Amps rated busbar, flush/surface mounting type, double-door construction, including wooden board, complete all as specified and directed. |
| 149 | S&F in repairs modular fan regulator, 120 Watt, 2-module type, including necessary connections and testing, complete all as specified and directed. |
| 150 | S&F in repair bell/buzzer, 230 Volts AC, single-pole type, including necessary electrical connections, complete all as specified and directed. |
| 151 | S&F MCB, single pole, 240 Volts, 6–32 Amps, breaking capacity 10 kA, including necessary connections and testing, complete all as specified and directed. |
| 152 | S&F MCB, SPN, 240 Volts, 32 Amps, breaking capacity 10 kA, including necessary connections and testing, complete all as specified and directed. |
| 153 | S&F sub-main wiring on and including passing through PVC conduit concealed in wall, including cutting chases in stone/brick wall, with 1100 Volts grade PVC flexible copper conductor cable, FRLSH, unsheathed multistranded single-core, size 6 Sqmm, comprising two runs of cable with one run of 6 Sqmm green-coloured PVC insulated unsheathed multistranded copper earth continuity conductor and one run of PVC conduit, including making good disturbed surfaces, complete all as specified and directed. Note: Two runs of cable together with one run of earth wire and one run of PVC conduit shall be measured as one length. |
| 154 | S&F in repair modular-type AC box with socket, 3-pin, 32 Amps capacity, complete with one single-pole 32 Amp, 240 Volts MCB, including necessary fixing arrangement and incoming/outgoing electrical connections, complete all as specified and directed. |
| 155 | S&F in replacement energy-efficient LED street-light fitting, 35 Watt, comprising pressure die-cast aluminium housing/body, heat-resistant clear toughened glass and suitable optics for uniform street/roadway illumination, with inbuilt driver and street-light bracket made from 25 mm dia medium-grade GI pipe, 0.60 metre long, complete with two sets of FI clamps made from 30 x 5 mm MS flat, nuts, bolts and washers, including two coats of aluminium silver paint over one coat of primer and necessary electrical connections; system efficacy minimum 100 lumen/Watt, input voltage 140–270 Volts, operating temperature minus 10°C to plus 45°C, PF minimum 0.95, THD maximum 10%, IP66, IK07 minimum, inbuilt potted LED driver of same make as luminaire with open/short-circuit and over-voltage protection, surge protection 10 kV (inbuilt + extended), CCT 5000K, CRI >80, rated life 50,000 burning hours, high-efficiency wide-angle lens and BIS-approved fixture/driver, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 156 | S&F in replacement energy-efficient LED street-light fitting, 35 Watt, comprising pressure die-cast aluminium housing/body, heat-resistant clear toughened glass and suitable optics for uniform street/roadway illumination, with inbuilt driver and street-light bracket made from 25 mm dia medium-grade GI pipe, 0.60 metre long, complete with two sets of FI clamps made from 30 x 5 mm MS flat, nuts, bolts and washers, including two coats of aluminium silver paint over one coat of primer and necessary electrical connections; system efficacy minimum 100 lumen/Watt, input voltage 140–270 Volts, operating temperature minus 10°C to plus 45°C, PF minimum 0.95, THD maximum 10%, IP66, IK07 minimum, inbuilt potted LED driver of same make as luminaire with open/short-circuit and over-voltage protection, surge protection 10 kV (inbuilt + extended), CCT 5000K, CRI >80, rated life 50,000 burning hours, high-efficiency wide-angle lens and BIS-approved fixture/driver, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender