Tender For Comprehensive B/R Repair And Other Allied Works In Dgqa Complex Badarpur And Repair / Maintenance To Steel Furniture Including Painting Atr Af Stn Tugthlakabad And Dgqa Complex Under Ge (Af) Tughlakabad
Tender Value
42.41 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
11 days left
EMD
84820
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive B/R Repair And Other Allied Works In Dgqa Complex Badarpur And Repair / Maintenance To Steel Furniture Including Painting Atr Af Stn Tugthlakabad And Dgqa Complex Under Ge (Af) Tughlakabad
BOQ
| Sl. No. | Item Description |
| 1 | Charpoy GI pipe (FD-220)Taking out unserviceable/ broken long rail from Charpoy GI pipe and S&F new long rail 32mm bore medium grade ISI marked as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 2 | Taking out unserviceable/broken short rail from Charpoy GI pipe and fixing short rail made out of long rails retrieved out of Srl Item 1 above as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 3 | Taking out unserviceable/broken leg from Charpoy GI pipe and fixing leg made out of short rails retrieved out of Srl Item No 2 above. Bottom of legs shall be plugged/welded with 5mm thick MS plate as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 4 | Taking out unserviceable/broken 3 way elbow from Charpoy GI pipe and S&F new 3 way elbow of 32mm bore ISI marked as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 5 | Taking out unserviceable/broken GI check nut from Charpoy GI pipe and S&F new check nut of 6mm thick 32mm bore as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 6 | Taking out unserviceable plastic/nylon newar from charpoy GI pipe and S&F Plywood of size 1980 x 900 mm of 12mm thick MR grade. Fixing on the top of GI Charpoy with suitable flat headed bolt, nut and washers 08 Nos of suitable size as per requirement including provision of 02 Nos stiffeners made out of 35x6mm flat iron duly painted with two coats of black paint over a coat of red oxide primer all as per sample kept in BSO yard complex. All as specified and directed by Engr-in-Charge. |
| 7 | Taking out unserviceable ply top from charpoy GI pipe and S&F of new Ply of size 1980 x 900 mm of 12mm thick MR grade. Fixing on the top of GI Charpoy with flat headed bolt, nut and washers 08 Nos of suitable size as per ground requirement including provision of 02 Nos stiffeners shall be provided made out of 35x6mm Flat iron duly painted with two coats of black paint over a coat of red oxide primer all as per sample kept in BSO yard complex all. All as specified and directed by Engr-in-Charge. |
| 8 | Teapoy Verandah (FD-383, 255) & FD/E6/MAP/17 Taking out unserviceable top from Teapoy verandah and S&F new top made out of pre-laminated particle board both side white shade exterior grade 18mm thick including 4mm thick teak wood beading all around the top as per existing shape & size complete all as shown in drg & directed by the Engr-in-Charge. |
| 9 | Taking out unserviceable rubber shoes from leg of Teapoy verandah and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 10 | Table office clerk steel (FD-84 & 1004)Taking out of unserviceable top from Table office clerk steel and S&F new top made out of pre-laminated particle board of one side teak face, exterior grade of 18mm thick including fixing of 4mm thick teak wood beading all around the top as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 11 | Taking out unserviceable drawer from the Table office clerk steel and S&F new drawer made out of 1mm thick mild steel sheet throughout as per the existing drawer complete all shown in drg and directed by Engr-in-Charge. |
| 12 | Taking out unserviceable lock from the table office clerk steel and S&F new brass lock of 04 levers with duplicate key complete all shown in drg and directed by Engr-in-Charge. |
| 13 | Taking out unserviceable rubber shoes from the legs of Table office clerk steel and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shoes complete all shown in drg and directed by Engr-in-Charge. |
| 14 | Table office Officer steel (FD-84 & 1003)Taking out unserviceable top from the Table office officer steel and S&F new top made out of pre-laminated particle board of one side teak face exterior grade of 18mm thick including fixing of 4mm thick teak wood beading all around the top as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 15 | Taking out unserviceable drawer from Table office officer steel and S&F new drawer made out of 1mm thick MS sheet throughout as per the existing drawer complete all shown in drg and directed by Engr-in-Charge. |
| 16 | Taking out unserviceable lock from the table office officer steel and S&F new brass lock of of 04 levers with duplicate key complete. All as shown in drg. |
| 17 | Taking out unserviceable rubber shoes from the leg of Table office officer steel and S&F new rubber shoes (Set of 04 Nos) of best quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 18 | Stool revolving steel adjustable (FD-103) Taking out unserviceable mild steel plate from stool and S&F new mild steel plate of 100mm dia 6mm thick by way of welding as per the existing shape & size duly applying two or more coats of approved paint to match with the existing complete all shown in drg and directed by Engr-in-Charge. |
| 19 | Taking out unserviceable seat from stool revolving steel adjustable and S&F new seat made out of seasoned hard wood 38mm dia of 25mm thick with foam having 32 density of 50mm thick duly covered with approved rexene cloth of 1.2 mm thick of cost not less than Rs 125.00 per Sqm shall be used in seat as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 20 | Taking out unserviceable rubber shoe from leg of stool revolving steel adjustable and S&F new rubber shoe (Set of 04 Nos) of best quality as per the existing shoes complete all shown in drg and directed by Engr-in-Charge. |
| 21 | Almirah large /Medium steel with shelves (FD-67,1031 & 1032)Taking out the unserviceable lock from the Almirah large/ medium steel and S&F new brass lock, six levers godrej pattern with duplicate key of approved quality complete all shown in drg and directed by Engr-in-Charge. |
| 22 | Taking out unserviceable handle from Almirah large/medium steel and S&F new handle of chromium plated of CP size 100mm long with 25mm long steel pin, to make 3 way locking system operational, of approved quality complete all shown in drg and directed by Engr-in-Charge. |
| 23 | Taking out unserviceable steel clamp from the almirah large/medium steel and S&F new steel clamp including fixing of loose shelves as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 24 | Taking out unserviceable locking device from Almirah large steel and S&F new 3 way locking device including MS rod 10 mm dia of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 25 | Taking out unserviceable locking device from Almirah medium steel and S&F new 3 way locking device including MS rod of 10 mm dia of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 26 | Cabinet filing Steel /Cabinet to hold cards/cabinet cordex steel (FD-67) Taking out unserviceable handle from the cabinet and S&F new handle chromium plated size 100mm long of approved quality complete all as specified and directed by Engr-in-Charge. |
| 27 | Taking out unserviceable lock from cabinet and S&F new brass lock of six levers with duplicate key as per trade pattern including repair to complete locking device with rolling function smoothly complete all as specified and directed by Engr-in-Charge. |
| 28 | Chair revolving lab cum computer with or without arm/off size/any type (TP)Taking out unserviceable wheel Base from any type of chair revolving and S&F new wheel base of different types as per trade pattern with existing shape & size of 600 to 650 material complete all as specified and directed by Engr-in-Charge. |
| 29 | Taking out unserviceable hydraulic assembly from chair revolving and S&F new hydraulic assembly of capacity 100 Kg as per trade pattern to make the chair functional as per existing shape and size complete all as specified and directed by Engr-in-Charge. |
| 30 | Taking out unserviceable tapestry cloth, foam cushion and plywood from seat & back of chair revolving and S&F new tapestry cloth of approved quality & shade of cost not less than 250 per Sqm including replacement of the foam cushion of 75 mm thick and 12mm thick plywood etc. as required complete all as specified and directed by Engr-in-Charge. |
| 31 | Taking out unserviceable hand rests from chair revolving and S&F new hand rests (set of 02 Nos for left and right each) as per the trade pattern of the existing hand rest made out of polyurethane with 75-85 shore 'A' hardness reinforced with MS and weather and scratch proof complete all as specified and directed by Engr-in-Charge. |
| 32 | Chair office/visitor / Executive (TP) Taking out unserviceable tapestry cloth from seat & back of chair office/visitor and S&F new tapestry cloth of approved quality & shade of cost not less than Rs 250.00 per Sqm including replacement of foam cushion of 75 mm thick and plywood of 12 mm thick etc. as required complete all as specified and directed by Engr-in-Charge. |
| 33 | Taking out unserviceable hand rests from chair Office/visitor and S&F new hand rests (set of 02 Nos for left and right each) of as per trade pattern of the existing hand rest made out of polyurethane with 75-85 shore 'A' hardness reinforced with MS and weather and scratch proof complete all as specified and directed by Engr-in-Charge. |
| 34 | Chair revolving office officers high back with PU arm (TP)Taking out unserviceable wheel base from any type of chair revolving and S&F new wheel base as per trade pattern made out of metallic powder coated & metal base and the existing complete all as specified and directed by Engr-in-Charge. |
| 35 | Taking out unserviceable hydraulic assembly from chair revolving and S&F new hydraulic assembly of capacity 100 Kg as required as per trade pattern and the existing to make the chair functional complete all as specified and directed by Engr-in-Charge. |
| 36 | Taking out unserviceable Leathrite or tapestry cloth from seat & back of chair revolving and S&F new Leathrite or tapestry cloth of approved quality & shade of cost not less than Rs 300.00 per Sqm including replacement of foam cushion of 75 mm thick and plywood of 12 mm thick etc. as required as per the existing complete all as specified and directed by Engr-in-Charge. |
| 37 | Taking out unserviceable hand rests from chair revolving and S&F new of hand rests (set of 02 Nos for left and right each) of as per trade pattern of the existing hand rest made out of polyurethane with 75-85 shore 'A' hardness reinforced with MS and weather and scratch proof complete all as specified and directed by Engr-in-Charge.. |
| 38 | Book case steel (FD-90 & 1028)Taking out unserviceable lock from Book case steel and S&F new six lever brass lock with duplicate key of approved quality complete all shown in drg and directed by Engr-in-Charge. |
| 39 | Taking out unserviceable handle from Book case steel and S&F new chormium plated steel handle of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 40 | Taking out unserviceable glass from the Book case steel and S&F new plain glass of 4mm thick of approved quality matching with the existing glass complete all shown in drg and directed by Engr-in-Charge. |
| 41 | Locker bed side steel (FD-257 &1029)Taking out unserviceable hasp & staple from Locker bed side steel and S&F new hasp and staple of size 75x40x4mm of approved quality complete all shown in drg and directed by Engr-in-Charge. |
| 42 | Taking out unserviceable handle from Locker bed side steel and S&F new chromium plated steel bow handle of 100mm long of approved quality as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 43 | Taking out unserviceable hanging rod from the Locker bed side steel and S&F new chromium plated steel hanging rod of 19mm dia approved quality complete all shown in drg and directed by Engr-in-Charge. |
| 44 | Chair tubular steel with and without arms (FD-75) Taking out the unserviceable seat from chair tubular steel and S&F new seat made of hard wood shisham duly canned with 2mm wide plastic cane half round type as per Godrej pattern and duly applying two or more coats or french polish complete all as specified and directed by Engr-in-Charge. |
| 45 | Taking out the unserviceable back from the chair tubular steel and S&F new back made of hard wood shisham duly canned with 2mm wide plastic cane half round type as per Godrej pattern and duly applying two or more coats or french polish complete all as specified and directed by Engr-in-Charge. |
| 46 | Taking out the unserviceable flat iron from the chair tubular steel and S&F new flat iron of size 25x3mm as per the existing shape & size complete all shown in drg and directed by Engr-in-Charge. |
| 47 | Taking out the unserviceable hand rests from chair tubular steel and S&F new hand rests (Set of 02 Nos) made out of hard wood shisham of existing size duly applying two or more coats or french polish of in required shade complete all shown in drg and directed by Engr-in-Charge. |
| 48 | Taking out the unserviceable Caps and rubber shoes from chair tubular steel and S&F new caps & rubber shoes (Set of 02 Nos Caps and 04 Nos rubber shoes) of best quality matching with the existing complete all shown in drg and directed by Engr-in-Charge. |
| 49 | CHAIR VARANDAH Taking out the unserviceable leg from the chair verandah and S&F new leg (front or rear leg) made out of 19mm MS Tube of 1.6 mm wall thickness along with hard rubber shoes at the bottom of legs complete all shown in drg and directed by Engr-in-Charge. |
| 50 | Taking out the unserviceable mild steel round bar from front and back side and S&F new mild steel Bar round of 10 mm dia shall be welded to both front and back side legs of chair Varandah complete all shown in drg and directed by Engr-in-Charge. |
| 51 | Taking out the unserviceable hard rubber shoe from chair verandah and S&F new rubber shoe (Set of 04 Nos) of approved quality in white colour complete all shown in drg and directed by Engr-in-Charge. |
| 52 | Taking out the unserviceable cane from the chair verandah, supply & re-canning with new cane of 4mm wide as per Mat pattern complete all shown in drg and directed by Engr-in-Charge. |
| 53 | Table laboratory cum work bench size 2000x1000x1350mm /1500x1000x800mm (TP)Taking out U/S drawers from table laboratory cum work bench and S&F new drawers made of 12mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial exterior grade BWR Make: National/Kit ply/ Bhutan including knob etc. All as directed by Engineer-in-Charge. |
| 54 | Taking out U/S shutter from table laboratory cum work bench and S&F new shutter made of 19mm thick block board commercial exterior grade BWR Make National/Bhutan duly covered with 4mm thick teak wood edging all around the shutter including piano type hinges 19mm wide, knob as directed by GE/ Engineer-in-Charge matching with the existing shape &p size. |
| 55 | Taking out U/S rubber shoe from Table laboratory cum work bench and S & F new rubber shoe of best quality matching with the existing shape & size. |
| 56 | Taking out U/S Top from table laboratory cum work bench and S&F new top made of 19mm thick block board commercial exterior grade BWR Make: National/Bhutan paste in double duly fixed laminated sheet in required shade and covered with aluminum channel of size 40x40mm 2mm thick all around the top. All as directed by Engineer-in-Charge. |
| 57 | Finish:-Painting of complete Table Lab cum work bench after removing of all dent/rust by scratching & applying one coat Synathic Enameled paint Make-Berger/Asian /Shalimar colour as approved by Engr-In-Charge |
| 58 | M&L for preparation of old painted surfaces by rubbing down with emery paper clean thoroughly to remove all dust/oily spots, dentings etc and applying one coat of synthetic enamel paint of existing shade with mechanical spray gun of all sides and inside with shelves door shutters for Almirah large steel complete all as specified and directed by Engr-in-Charge. |
| 59 | All as per Sl item No 58.00 but for Steel Almirah medium size. |
| 60 | All as per Sl item No 58.00 but for Steel Book case. |
| 61 | All as per Sl item No 58.00 but for Teapoy verandah. |
| 62 | All as per Sl item No 58.00 but for Table office clerk. |
| 63 | All as per Sl item No 58.00 but for Table office officer. |
| 64 | All as per Sl item No 58.00 but for Steel Locker bedside. |
| 65 | All as per Sl item No 58.00 but for Steel Chair tubular. |
| 66 | All as per Sl item No 58.00 but for Chair verandah. |
| 67 | Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engr-in-Charge. |
| 68 | Demolition of mud in roofs any thickness, including plastering and leeping plaster complete all as specified and directed by Engr-in-Charge. Demolished material shall be removed outside the MoD land as per dirn. |
| 69 | Surface preparation of all foreign material such as grass roots dust/mud etc and roughening the concrete surfaces by wire brushes including PCC 1:2:4 type B1 using 12.5 mm graded aggregate as directed in roof for maint the uniform slope/gradient and applying cement screed bed of 10 mm thick 1:4 with water proofing compound @ 3% weight of cement as per manufacture instruction with APP modified polymeric membrane centre core of 100 micron HMHDPE, weight not less than 3 Kg/Sqm and clear thickness of membrane not less than 3 mm thickness, on newly prepared surface with overlap while torching shall be 100mm on length side & 100mm on width side of memberance as per manufacturer instruction complete all as specifid and as directed with the following description. (a) Apply evenly a coat of bituminous primer conforming to IS -3384 @ 0.40 Kg/Sqm. (b) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @1.20 Kg/Sqm as IInd course. (c) Laying of APP modified polymeric membrane as a IIIrd course. (d) A coat of aluminium paint application by brushing @.25 Kg/sqm on APP membrane as a forth course |
| 70 | Supply only water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 71 | M&L providing cement concrete in roof or mud stops using type B-1 1:2:4 (20 mm graded aggregate) rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge. |
| 72 | M&L for PCC 1:2:4, type B2 using 40 mm graded aggregate as in tank staging laid including finishing the concrete surface even and smooth using extra cement complete all as specified and directed by Engr-in-charge. |
| 73 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed |
| 74 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge |
| 75 | S & F Factory Made Solid PVC Moulded Door Shutter with particle board, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing specified in SSR and as directed by Engineer-in-Charge |
| 76 | S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete. |
| 77 | S&F Aliminium anodised barrel tower bolts, 150 mm long complete. |
| 78 | S&F Aluminium anodised handles, cast type anodised 125 mm long complete. |
| 79 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames). |
| 80 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 81 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 82 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed. |
| 83 | Taking down shutter of any description exc 1.00 Sqm and n.exc 2.00 Sqm each and re-fixing the same in same opening complete all as specified. |
| 84 | Taking down shutter of any description exc 1.00 Sqm and n.exc 2.00 Sqm each and removal from site. |
| 85 | M &L Flush shutters,30mm thick solid core construction, with block board core and plywood face panels, commercial type on one sides with 0.9mm thick decorative laminate type 1 on both side and lipping/frame to match surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions. |
| 86 | S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats |
| 87 | S&F of Continuous (piano) hinges, stainless steel steel, bright finish. |
| 88 | S&F of 25 mm thick flush shutter, ISI marked, solid core construction with block board core and plywood face panels commercial face panels, commercial type on both sides.all as specified. |
| 89 | S&F 18/19 mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work rebate suitable for cup board shutters complete all as specified. |
| 90 | S&F of in repair galvanised mild steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapple |
| 91 | S&F of 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete. |
| 92 | S&F of 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate and fixed |
| 93 | S&F of 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed. |
| 94 | S&F of 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as 150mm size specified and as directed. |
| 95 | S&F of 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and as directed. |
| 96 | M & L for sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and directed by Engr-in-charge. |
| 97 | All as per item No 96 above but pin head type, figured glass |
| 98 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) complete all as specified. |
| 99 | M&L for preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 100 | S & F in repairs of vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor. |
| 101 | S & F in repair of PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make |
| 102 | S&F in repair of wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed. |
| 103 | S&F in repair of 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified. |
| 104 | S & F in repair of PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality |
| 105 | S & F in repair of 15 mm bore Angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified |
| 106 | S&F in repair of brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and as directed |
| 107 | S & F in repairs of 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed. |
| 108 | S&F in repair of brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges. |
| 109 | S&F in repair of CP soap tray fixed to walls with rubber plugs complete all as specified and directed. |
| 110 | S&F in repair of 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. |
| 111 | S&F in repair of sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and as directed. |
| 112 | S&F in repair of 125mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) |
| 113 | S&F in repairs of (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. Please Enable Macros to View BoQ information |
| 114 | S&F in repairs of (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender