Tender For special Repair To Water Main From Header Near Brihon Bridge To R Center Pump House Under Ge (Utilities) Udh Ur
Tender Value
47.05 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
4 days left
EMD
94108
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Water Main From Header Near Brihon Bridge To R Center Pump House Under Ge (Utilities) Udh Ur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Oct-2026 | BOQ REVISED | BOQ | 30-Oct-2026 |
| 2 | 30-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE Utilities Udhampur Name of Work: Spl Repair to Water Main from Header Near Brihon bridge to R Center Pump house under GE (Utilities) Udhampur Contract No: GE/U-103/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking up cast iron water mains 200 mm dia (including all fittings),with spigot and socket ends and lead joints including burning out joints and recovering lead, complete all as specified and directed by Engr-in-Charge. |
| 3 | Cutting of existing water main 200mm bore in position for insertion of new Tee 200mmx200mm X 200 mm (1 No) all ends flanged and 2 Nos connecting pieces (socketed/ spigoted) 200 mm bore and making joint all as specified.Note : Fittings such as tee, elbows, collar, reducer etc joint and jointing material for fixing of cast iron fittings shall be measured and paid separately complete all as specified and directed by Engr-in-Charge. |
| 4 | Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified directed by Engr-in-Charge. Note MS flanges,necessary welding work for flanges , gaskets and jointing of pipes included in the rates. Nut bolt are measured seprately under relevant items . |
| 5 | Cutting of existing water main 300mm bore in position for insertion of new Tee 300mmx300mm X 300 mm (1 No) and 2 Nos connecting pieces (socketed/ spigoted) 300 mm bore and making joint all as specified.Note : Fittings such as tee, elbows, collar, reducer etc joint and jointing material for fixing of cast iron fittings shall be measured and paid separately complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 300 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified directed by Engr-in-Charge. Note - MS flanges,necessary welding work for flanges , gaskets and jointing of pipes included in the rates. Nut bolt are measured seprately under relevant items. |
| 7 | Supply and fix in replacement cast iron sluice valve suitable of size 300 mm (PN 1.6) ISI Marked with iron wheel head both end flanged, non rising type and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing,complete all as specified and directed by Engr-in-Charge. |
| 8 | Supply and fix in replacement cast iron sluice valve suitable of size 200 mm (PN 1.6) ISI Marked with iron wheel head both end flanged, non rising type and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing,complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing with stone aggregate complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for construction of stone masonary valve pit size 0.9 mtr x 0.9mtr x0.6 mtr (internal dimention) including stone work, PCC work and MS sheet work as per site requirment, Complete all as specified and directed by Engr-in-Charge. |
| 11 | Material & labour cement concrete in foundation,filling and mass concrete type C2 1:3:6(40mm graded aggregate) for providing thrust block complete all as specified and directed by Engr-in-Charge. |
| 12 | Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in 1:3 in CM, complete all as specified and directed by Engr-in-Charge. |
| 13 | Material & labour rendering 10mm thick on fair faces of bricks works or concrete surfaces in cement plaster and add or deduct to/from the rates for rendering for each 5mm thickness over or under 10 mm. (CP 1:3) , complete all as specified and directed by Engr-in-Charge. |
| 14 | Material & labour for machine pressed precast concrete inter locking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 grade complete all as specified and directed by Engr-in-Charge. |
| 15 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but lenth of bolt exc 5cm and n exc 10 cm long and diameter of neck 16 mm complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F Mild; posts and struts in fixing with pipes including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets, including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165. ,complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg.complete all as specified and directed by Engr-in-Charge. |
| 18 | Supply and fixing in replacement of cast iron non return valve, conforming to IS-5312, suitable for 200 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk complete all as specified and directed by Engr-in-Charge. |
| 19 | Supply and fixing in replacement of air release valve, conforming to IS- 14845 with ,two air out lets suitable for 100 mm bore pipe, heavy duty ,both end flanged jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk complete all as specified and directed by Engr-in-Charge. |
| 20 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, maneholes, pier holes etc. and taking out/laying of pipe lines of soft/dense soil. Complete all as specified and directed by Engr-in-Charge. |
| 21 | Returning, filling, levelling, spreading, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engr-in-Charge. |
| 22 | Removing surplus soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 06, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender