Tender For Comprehensive Maintenance Through Outsourcing Incl The Day To Day Maintenance To Certain Bldgs At 105 Ta In Area Of Age B/R-I Under Ge (Central) Delhi Cantt-10
Tender Value
1.20 Crore
Estimated cost
Bid Submission
06 Nov 2026
27 days left
EMD
1.95 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Through Outsourcing Incl The Day To Day Maintenance To Certain Bldgs At 105 Ta In Area Of Age B/R-I Under Ge (Central) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old decoreated external wall / internal wall/Ceiling surface of existing treatment by scrapping with TruCare Wall Sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7”/9” to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible.Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes.2. Material shall be procured from manufacturer and work shall be got executed through authorised applicator. |
| 2 | M&L for preparation of old/new decoreated external wall surface by mechanised sander of Berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible, again sand papering thus making surface smooth. and applying one coat of cement base paint on walls complete all as specified and all as directed by Engr-in-Charge . Note :- The prepration of surfaces stage shall be got approved from GE before applying the finishes. |
| 3 | M&L for Preparation of old/new painted surfaces of wood based surfaces of any description over 10 Cm width or girth by applying sand paper etc.for proper preparation and applying two coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed. |
| 4 | M&L for Preparation of old/new painted surfaces of steel of any description over 10 Cm width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed complete all as specified and directed. |
| 5 | Taking down cement plaster on brick walls, or stone walls / ceilings etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 6 | M&L for renderning 15 mm thick in CM 1:4 on any faces of brick/concrete surfaces finished even and fair with out using extra cement complete all as specified. |
| 7 | M&L for rendering 15mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed. |
| 8 | M&L for prepration of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed . |
| 9 | M&L for preparation of newly plastered surfaces and applying two coats of Oil bound distemper over one coat 3mm thick of wall putty on newly plastered surface over a coat of primer. |
| 10 | Taking down rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends Note rate quoted up to |
| 11 | S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete. |
| 12 | S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete. |
| 13 | Complete removal of existing old treatment on surface from walls with machenical scraper (machine) complete all as specified and directed. |
| 14 | M& L a coat of alkali resistant primerover alread prepred surface of walls complete all as specified and directed. |
| 15 | M& L for preparing the entire surface with applying 2-3 mm thick birla/ JK wall care putty on walls/ ceiling surface finished even and smooth(internal surface) complete all as specified and directed. |
| 16 | M& L for applying two coats of oil bound distemper on wall surface with roller brush complete all as specified and directed. |
| 17 | Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified |
| 18 | M&L for Plain, solid, straight chowkats and frames made of 2nd class hard wood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed,making good , complete all as specified and as directed by Engineer-in-Charge. |
| 19 | S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 20 | M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified. |
| 21 | S&F 150mm long extruded alumiunium alloy handle fabricated type anodized (D type). |
| 22 | S&F 100 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified. |
| 23 | S&F for 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete |
| 24 | Supply & fix two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge. |
| 25 | S&F for galvanized stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm dia fixed with stainless steel wire staples including beading complete all as specified and as directed . |
| 26 | Hacking out old broken glass of any thickness size quality or description frame wooden frames /Aluminium frame fixed with wooden beads/aluminium beads and M&L 5.5 mm thick sheet galss ordinary quality and glazing with wooden bead/aluminium beads, avg n.exc 0.50 Sqm complete all as specified |
| 27 | S & Fin repair 1000 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I |
| 28 | S & F in repair 500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I |
| 29 | Taking down chowkhat or frame not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) |
| 30 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded Complete all Specified and directed. |
| 31 | ditto- all as per Srl item No 30 above but without glazing bars |
| 32 | S&F for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 |
| 33 | Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified |
| 34 | M & L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished fair and even without using extra cement, complete all as specified. |
| 35 | Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified. |
| 36 | S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified. |
| 37 | Fixing only 15 mm water tubes, any grade, to walls and ceilings or laying in floors in repairs complete all as specified. |
| 38 | Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified. |
| 39 | S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified. |
| 40 | Fixing only 20 mm water tubes, any grade, to walls and ceilings or laying in floors in repairs complete all as specified. |
| 41 | Disconnecting existing tanks of cap 1000 ltrs, setting aside (or lower ing if required) for repairs, cleaning, etc. and hoisting if required re- connecting and re-fixing in position and Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. |
| 42 | Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc Complete all as specified. |
| 43 | M&L for brick work with sub class 'B' bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1 : 4 complete all as specified. |
| 44 | M & L for Non skid 600x600x8 to 7-8mm thick coloured ceramic joint less tiles as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles including cutting of existing door shutter at required height. complete all as specified directed by Engr-in-Charge, and approved by GE Make-kajaria/Johnson,Somany |
| 45 | M& L for Non skid coloured ceramic tiles (300x300x)7 to 8mm thick in floors, etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed for laying floor in CM 1:6 complete all as specified and directed by Engineer in Charge. |
| 46 | M&L for coloured ceramic tiles (300x250x7mm/450x350x7mm) thick on vertical surfaces on skirting dados and risers to steps etc including rendering 10mm thick cement mortar in CM 1:4 ,complete all as specified and directed by Engr-in-Charge. |
| 47 | S & F in repair stainless steel drapery Rod 25mm dia with 2mm thick including wooden side caps, brackets, and rings @ 120mm c to c, complete all asspecified and directed. |
| 48 | S&F fibre glass Reinforced Plastiic (FRP)door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be coverec with fibre glass from all sides . MS stay shal be provided at the bottom to steady the frame . |
| 49 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings. |
| 50 | Dismantling boarding , any description, fixed in any position with screws complete all as specified |
| 51 | S&F 6mm thick plywood with 5Nos of ply, grade BWR, type BB, fixed with screws to timber frame work etc, complete all as specified. |
| 52 | S&F PVC 18 mm thick PVC celluca ply one side prelam fixed with solvent cement adhesive and screws as in kitchen cabinet complete all as direction of the Engr-in-Charge and the manufacturers specifications and drawings. |
| 53 | S&F in repair bathroom mirror 400x600mm decorative mirror selected qualtiy glass, with PVC frame complete all as specified and directed. |
| 54 | S&F chlorium plated shower roses with or without swivel join ts 100mm size incl fixingto steel pipe in repairs |
| 55 | S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm |
| 56 | S & F in repairs 15mm bore Bib taps chromium plated, cast opper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 57 | S&F in repairs, Vitreous China wash basin, white, flat back of size 550mmx400mm excluding taps, but including waste coupling, waste pipe, chain and plug and porcelain stopper and brackets etc. complete as specified and directed. |
| 58 | S&F for waste fittings, 32 mm bore , PTMT (half or full threated).( Minimum weight 32 mm-45gms/40mm-60 gms) ,complete all as specified and directed. |
| 59 | S & F in repair ,vitreous china wash down water closet pan (pedestal pattern)white with P orS trap incl flushing pipe ,seat & PVC seat cover( white)closed pattern with flat bottom & cover brass chromium plated hinging device ,incl connection to drain and to flushing pipe,antisyphonage pipe etc complete .. |
| 60 | S & F in repair ,vitreous china squatting pan (Orissa pattern) of size 580x 440 mm white with integral foot rest,incl 'P' or 'S' trap & front or back inlet complete all as specified. |
| 61 | S & F in repair PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity , low level, white, with inlet, ball valve, float and handle including brackets complete, all as specified and as directed. |
| 62 | S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complete all as specified and directed by Engineer-in-Charge. |
| 63 | M & L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 64 | M&L aluminium alloy powder coated windows including aluminium coated frames sliding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double riveted and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series-A (15mm) 3 track of Jindal section number for sliding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clips joint cleats rubber gaskets etc including provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed. |
| 65 | S&F aluminium ventilator partly glazed/ gauzed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws , MS wire mess , 3mm thick sheet glass etc. provision for fixing the exhaust fan complete all as specified and as directed |
| 66 | Supply and fix vitreous China wash hand basin (pedestal) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and 32 mm waste pipe & waste coupling including all necessary fitting and fixtures complete all as specified |
| 67 | Dismantling of wall and ceiling/cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring |
| 68 | M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles for temp buildings/PMT Bldgs of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners or 3 to 4 mm GI hanging wire for temp Bldg length/ht as per site req ,6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-incharge. |
| 69 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 70 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type Skelton door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item).Note:- Contractor will provide manufacturer test certificate alognwith screw out test certificate. |
| 71 | Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt |
| 72 | S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 73 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 74 | Demolition and breaking up drain pipes of 200mm dia at any depth (Salt glazed ware, AC or Reinforced concrete, DWCPE) set in cement mortar |
| 75 | Demolition and breaking up drain pipes of 150mm dia at any depth(Salt glazed ware, AC or Reinforced concrete, DWCPE) set in cement mortar |
| 76 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregates for bedding layers laid (SN8) 180(OD)/163(ID) mm internal dia DWCPE pipes after they are laid and tested complete all as specified (thickness of concrete bed 100 mm). |
| 77 | S&F DWCPE(SN8) 180(OD)/163(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified. |
| 78 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregates for bedding layers laid DWCPE(SN8) 200(OD)/175(ID) pipes after they are laid and tested complete all as specified (thickness of concrete bed 150mm). |
| 79 | S&F DWCPE(SN8) 200(OD)/175(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified. |
| 80 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete. |
| 81 | M&L for machine pressed precast concrete interlocking paver block with gray cement and no pigment, any shape and size confirming to IS- 15658 -2006 of 60mm thickness, M-40 Gde,Over and including 20mm thick layer of sand and 15 mm thick CM 1:6 complete all as specified and directed. |
| 82 | M&L for 100mm thick PCC (1:4:8) Ty D2 as in sub base over rammed earth. |
| 83 | M&L for 50mm thick PCC 1:3:6 type C2 using 20mm graded stone agg as in sub base complete all as specified.. |
| 84 | M&L for 300mmx300mmx25mm chequered coloured ultra tiles over 15 mm thick screed bed in cm 1:6 and jointed and pointed in white cement mixed with pigment to match the shade of tiles of flooring all as directed. |
| 85 | S&F Exterior Endura Chequered cement concrete colour tiles 300cm X 300cm x 10mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments incl 15 mm thick screed bed or bedding layer for laying floor finishes of tiles CM 1:6 Complete all as specified and directed by Engineer-in-Charge. |
| 86 | S & F in replacement for precast plastic fibre reinforced cement concrete Manhole covers with frame medium duty of overall size 450mmx900mmx50mm factory made all as specified and directed by Engineer-in-Charge. |
| 87 | Dismantling fencing wire mesh, any type |
| 88 | Dismantling wrought iron or mild steel work of any description not otherwise provided for roof trusses and purlins complete all as specified and as directed. |
| 89 | M&L for cement concrete type D2 1:4:8(40mm graded aggregate) as in foundations, filling and mass concrete. |
| 90 | S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, driliing holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290, Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer compete all as specified and as directed by Engineer-in-charge. |
| 91 | Supply only 3.15 mm dia galvanised steel chain link fencing, 50x50 mm mesh, made up to into mattrsses or cages, lapped, wired a all as specified. |
| 92 | Fixing only chain link fencing including line wires any mesh, size and type to any to any type of standard, rail, straining bolts, etc provn of winding wire all as specified. |
| 93 | M&L Mild steel Round 10mm dia conforming to FE-410-W (Gde-E-250) qualility A or FE-290 (Gde E-165) for use in chain link fencing as wind tie all as specified. |
| 94 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end screwed the other, the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30cm and dia of neack exc 12mm but not exc 20mm complete all as specified and as directed by Engineer-in-charge. |
| 95 | Note - Rate quoated above all items inclusive provision as under :Making arrangement for establishment of centralized complaint centre in the existing building as under :- (a) Infrastructure required in Complaint cell i.e. telephone, furniture, stationary, transport and other necessary items/materials to establish a new complaint centre able to receive and manage complaints from the users by all means ie Manual complaint mechanism, Telephonic complaints mechanism, SMS complaint Mechanism and e-mail complaint mechanism and to maintain a consolidated list of complaints and its redressal mode indicating all its relevant data. (b) Computer data operator shall be able to manage all the necessary activities and having qualification as10+02 or Equivivalent in any discipline with minimum 6 month certificate course of computer applications (from a Govt recognized institute), (c ) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract (d) Provision of communication facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints before change of eight hour shift. (g) Provision of motorized conveyance for deployment to all tradesmen under this contract. (h) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone (j) On lodging the complaint, the Complaint No will be assigned for reference . Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen. (k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. (l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending , probable time required for attending the pending complaints etc (m) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (n) AGE will visit the complaint cell at least twice a week and GE at least once a weak to check the efficacy of the system and record their remarks accordingly. Note : Contractor shall be responsible for followings :- (i) Installation of landline telephone connection with internet broadband facility, obtaining SIM cards for mobile phones for supervisor and workers, deployed by the contractor. (ii) Payment of telephone bills, internet charges, mobile bills, expenses etc shall be borne by the contractor and no claim whatsoever on this account will be admissible by the department. (iii)A Computer/PC System with internet Connection for the Complaints lodging and Supervising will be Provided by the Contractor and will not be paid Seperately.(iii)Space for complaint cell/Office & Store will be Provided by the Department. And for any Security Breach/Theft Activity department will not be responsible. Contractor Have to arranged All Security Things By Self. |
| 96 | Checking electrical points for continuous electric supply system and replacement of unserviceable spares for all electrical fixtures, ceiling/exhaust fans of any size and capacity and carrying out minor repairs, fixing screws, tightening of loose wires, any type renewal of small pieces of electric wire as per suitable length and maintenance work complete on all working days including Sunday & holidays all as directed by Engr-in-charge. Note :: Item Se No Fom 03 to 47 & Ser No 56 to 72 come under this complaints |
| 97 | Attending to Geyser complaints at site including checking and rectification of any electric fault/ water leakage and making good in all respects including minor repairs, replacement of unserviceable spares, burnt copper wire connections wherever required and repairing any type of switch, socket, plug top etc complete all as specified and directed. Note :: Item Ser No From 48 to 55 come under this complaints Notes for Item No. 1 and 2(a) Supply only spares shall be measured and paid under relevant item (b) Contractors are advised to visit the sites before quoting their rates.(c) Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one week from the date of issue of work order. (d) Contractor shall provide and deploy adequate experienced Exp. professional to carry out day to day complaints and and mush deploy 01 Supervisor, 01 Electrcian & 01 Helper at Bath Road complaint cell Cell from 9:00 Hrs to 1700 Hrs from Monday to Sunday. In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on Sunday/ holidayday//night time also. The rates quoted in scdule, respective items shall be deemed to be included and nothing extra shall be admissible on this account.Note:whatever be the nature of electrician complaint the wholesole rectification responsibilty lies with the contractor. (e) Contractor shall be penalised @ Rs. 100/- per complaint per day, if he fails to attend the complaint within 8 hours.(f) All Ser Numbered complaints dockets will be provided by contractor amount of dockets include this. (g) Daily attendance register will be maintained by the concened JE E/M & if any electician/helpe found asent on any woking day then penalty @ Rs 1000/- per day per workman will be received fom the contactor. |
| 98 | Supply only in replacement switch piano flush button type single pole one way 6 Amps all as specified. Make: Anchor/ Havells/ cona |
| 99 | Supply only in replacement switch piano 16 amp SP two way, ISI marked Make:Anchor/ Havells/ cone |
| 100 | Supply only in replacement socket piano outlet 6 Amp flush button type all as specified Make:- Anchor/ Havells/ cona |
| 101 | Supply only in replacement switch piano flush button type single pole 16 Amps. Make:- Anchor/ Havells/ cona |
| 102 | Supply only in replacement socket piano outlet, 2 in 1, 3 pin 6/ 16 Amp Flush type single pole. |
| 103 | Supply only in repairs bell push single pole 6 Amps all as specified. |
| 104 | Supply only in repairs Ceiling fan regulator electronic step switch type/socket type, suitable for 1200/1400 mm sweep ceiling fan, 230 Volts single phase complete. |
| 105 | Supply only in repairs switch Modular type 6 Amps one way 230V AC complete all as specified and directed by Engineer in charge. |
| 106 | Supply only in repairs switch Modular type 6 Amps two way 230V AC complete all as specified and directed by Engineer in charge. |
| 107 | Supply only in repairs Modular Bell push button SP with indicator 6 Amps, 1 module 230V AC complete all as specified and directed by Engineer in charge. |
| 108 | Supply only in repairs Modular socket outlet 5 pin 6 Amp socket 2 moduler complete all as specified and directed by Engineer in charge. |
| 109 | Supply only in repairs switch Modular type 16 Amps one way 230V AC complete all as specified and directed by Engineer in charge. |
| 110 | Supply only in repairs Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge. |
| 111 | Supply only in repairs Modular five stepped type electronic fan regulator 1/2 module 230V AC complete all as specified and directed by Engineer in charge. |
| 112 | Supply only in repairs ceiling rose surface PVC type with three terminals. |
| 113 | Supply only in repairs Electric bell Ding-Dong AC 230 Volt etc complete all as specified and directed. |
| 114 | Supply only in repairs insulated body, angle holder (metal ring) with back plate ISI marked complete all as directed. |
| 115 | Supply only in repairs industrial metal clad, plug top, 3 pin, 10 Aamp (ISI marked) as directed. |
| 116 | Supply only in repairs industrial metal clad socket 3 pin 20 Amp (ISI marked) as directed. |
| 117 | Supply only in repairs plug top 6 Amps 3 pin 230- volts |
| 118 | Supply only in repairs plug top 16 Amps 3 pin 230- volts |
| 119 | Supply only in replacement LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 120 | Supply only in replacement LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 121 | Supply only in replacement LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP-65 Protection, System level efficacy of the Luminary is > 100 lm/W with L70 criteria, Power Factor >0.90, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-5700K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. |
| 122 | Supply only in replacement surface ceiling mounted, round LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 25000 burning hours, 5700K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. (Make-Wipro / Crompton Greaves / eqivalent in Phillips). |
| 123 | Supply only in repairs recessed mounting LED FLAT panel 2'x2' made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20 Suitable for 35/36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed. |
| 124 | Supply only in repairs of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x12 watt LED bulb B22 base Note: rate quoted one piece of 12 watts LED bulb included in the fitting . Make:- Philips/Wipro/Jaquar |
| 125 | Supply only in repairs recess ceiling mounted, round/square LED down light fitting 10/12 watts as requirment at site with die cast aluminium housing and system wattage of 10W/12W, system efficacy at luminary level ≥ 80 Lumens/watt, 5700K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. (Make-Wipro / Crompton Greaves / eqivalent in Phillips). |
| 126 | Supply only in repairs 15 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz |
| 127 | Supply only in repairs 9 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz, |
| 128 | Supply only in repairs MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete. Make:- Legrand/Indoasian /Havels. |
| 129 | Supply only in repairs MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete. Make:- Legrand/Indoasian/ Havells. |
| 130 | Supply only in repairs MCB DP 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete. Make:- Legrand/Indoasian/ Havells. |
| 131 | Supply only in repairs MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting .Make:- Legrand/SEIMENS/ABB. |
| 132 | Supply only in repairs MCCB 125 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting .Make:- Legrand/SEIMENS/ABB. |
| 133 | Supply only in repairs MCCB 100 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting .Make:- Legrand/SEIMENS/ABB. |
| 134 | Supplu only in repairs fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge. Make: Orient/Havells/CG |
| 135 | Supply only in repairs exhaust fans AC single phase 230/240 V of size 300 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with louvers for fixing of exhaust fan complete Make: Orient/Havells/CG |
| 136 | Supply only in repairs PVC Gang box surface type heavy duty suitable for single switch 6 Amps (ISI Marked) . Make- Legrand /Havells/Crabtree/Polycab. |
| 137 | Supply only in repairs Gang box surface type heavy duty suitasble for 15 Amps switch and socket (ISI Marked) |
| 138 | Supply only in repairs white cover plate with frame 1 module/ 2 module complete all as specified and directed by Engineer in charge. |
| 139 | Supply only in repairs white cover plate with frame 3 module complete all as specified and directed by Engineer in charge. |
| 140 | Supply only in repairs white cover plate with frame 6 module complete all as specified and directed by Engineer in charge. |
| 141 | Supply only in replacement hylem sheets 3 mm thick (ISI marked) of the following sizes :- Make :-As per sample. |
| 142 | (a) Sheet 4\\" x 4\\" single cutting suitable for one piano switch |
| 143 | (b) Sheet 4\\" x 4\\" two cuttings suitable for two piano switches |
| 144 | (c) Sheet 4\\" x 7\\" three cuttings suitable for three piano switches |
| 145 | (d) Sheet 4\\" x 7\\" one cutting for 6 Amp socket and two cuttings for piano switches |
| 146 | (e) Sheet 8\\" x 10\\" incl cuttings for switches and sockets 6/16Amps as directed. |
| 147 | (f) Sheet 10\\" x 12\\" incl cuttings for switches and sockets 6/16Amps as directed. |
| 148 | Supply only in eplacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed. |
| 149 | Supply only in replacement of capacitor 1.5 Mfd, 240 V complete all as specified and directed. |
| 150 | Supply only in replacement hole fastner madeup of MS 6\\" long with complete nut bolt all as specified.Make:as per sample |
| 151 | Supply only in replacement hole fastner madeup of MS 4\\" long with complete nut bolt all as specified.Make:as per sample |
| 152 | Supply only in replacement heating element of 2 KW any type with nut bolt washer complete all as directed. Make-THEETA/BAJAJ/USHA |
| 153 | Supply only in replacement non return valve 15mm dia (ISI Marked) for geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as directed. |
| 154 | Supply only in repairs for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge. |
| 155 | Supply only in replacement thermostat for 25/35/50 ltrs capacity of geysers complete all as directed. |
| 156 | Supply only in repairs SS braided pipe of 12 mm ((internal) suitable for hot/cold water, 60 cm long with brass nuts and rubber washers complete all as specified and directed. |
| 157 | Supply only in replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 1.5 sqmm with approved colour code completed all as specified. |
| 158 | Supply only in replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 2.5 sqmm with approved coloured code completed all as specified. |
| 159 | Supply only in replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 4 sqmm with approved coloured code completed all as specified. |
| 160 | Supply only in replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 6 sqmm with approved coloured code completed all as specified. |
| 161 | Supply only in replacement FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 10 sqmm with approved coloured code completed all as specified. |
| 162 | Supply only in replacement copper cable flexible 3 core PVC insulated of size 23/.0076 ll as specified and directed by Engr-in-Charge |
| 163 | Supply only in repairs wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge. |
| 164 | Supply only in repairs BLDC ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, AC single phase 230/240 V of size 1200 mm sweep with Fan canopy, fan rod, fan regulator & remote of ceiling fan including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. |
| 165 | Supply only in repairs 35/40 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie > 110lm/W with a life class of 25,000 burning hours at L70. The color temperature is around 5700 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 150-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 25 mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete |
| 166 | Supply only in replacement exhaust fan motor capacity 1/4 HP 230 volts suitable for 300 mm size exhaust fan complete all as directed. |
| 167 | Supply only in replacement fresh air fan motor 230 volts AC, 50 Hz suitable for 250 mm size ftesh air fan complete all as directed. |
| 168 | Supply only in replacement all accessories of PCB BLDC ceiling fan with remote any type, any make, any capacity, including taking down carefully ceiling fan & refixing the same as per requirement at site complete all as specified & directed by Engineer-in- Charge |
| 169 | Supply only in replacement fresh air fan blade any make, any capacity as requirement at site all asspecified & directed. |
| 170 | Supply only in replacement fresh air fan PVC cup/check nut as requirement at site all asspecified & directed. |
| 171 | Supply only in replacement Rechargeable bulb of capacity 15 watts as requirement at site all asspecified & directed |
| 172 | Supply only in replacement exhaust fan motor capacity, 230 volts, AC, 50 Hz suitable for 450 mm size exhaust fan complete all as directed. |
| 173 | Supplying only in replacement 1100 volts grade 6 sqmm heavy duty stranded cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular |
| 174 | Supply only in replacement modular mini AC box with MCB 20 Amp complete with metal box and 3 Pin, 15 Amps plug top complete all as specified and directed.Note : Rates are inclusive of cutting / chases for mounting Modular metal box concealed in wall and making good to the disturbed surfaces with OBD / colour wash / white wash and wall putty where ever is required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender